Tio2
Mostrando 13-24 de 771 artigos, teses e dissertações.
-
13. Dióxido de titânio nanoestruturado para uso em implantes ósseos: uma breve revisão
Resumo Os materiais nanoestruturados à base de dióxido de titânio (TiO2) têm demonstrado grande potencial para uso em implantes graças às suas excelentes propriedades físico-químicas, como alta área superficial específica, capacidade de provocar resposta celular positiva e estabilidade nos fluidos corporais. No entanto, existem poucos estudos na li
Cerâmica. Publicado em: 2020-12
-
14. Atividade fotocatalítica sob luz visível e reutilização de filmes de TiO 2 dopados com N crescidos por MOCVD
Resumo O crescimento de filmes de TiO2 dopados com nitrogênio sobre vidro borossilicato foi efetuado a 400 °C por deposição química de organometálicos em fase vapor (MOCVD) visando a remoção de corantes da água sob luz visível. O efeito da dopagem nas propriedades estruturais, morfológicas e fotocatalíticas dos filmes foi avaliado. Análises por
Cerâmica. Publicado em: 2020-12
-
15. Microstructural and mechanical characterisation of the Simon Bolivar's iron bridge structure, 19th century, Arequipa, Peru
Abstract The microstructure of the main structural elements (Phoenix columns, transversal beams and tie-rods) of the Simón Bolivar iron bridge, located in Arequipa (Peru), was investigated. The bridge was supposedly designed by Gustave Eiffel and opened to the public in 1882. The characterisation revealed that the columns, beams and tie-rods are made of pud
REM, Int. Eng. J.. Publicado em: 2020-12
-
16. Effect of Push-Pull Ruthenium Complex Adsorption Conformation on the Performance of Dye Sensitized Solar Cells
A new series of tris-(bipyridyl)ruthenium-like complexes based on the 4-tripheylamine-2,2’:6’,2’’-terpyridine (TPA) push-pull ligand was prepared by incorporation of 4-carboxypyridine (cpy), 4,4’-dicarboxi-2,2’-bipyridine (dcbpy) and 4-carboxyterpyridine ligands (ctpy) ligands, in order to adsorb them on TiO2 in different anchoring conformations.
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
17. Efeito da temperatura nas propriedades fotocatalíticas de filmes finos multicamadas de TiO 2 -CeO 2 obtidos por spin coating
Resumo Filmes finos multicamadas de TiO2-CeO2 foram depositados pelo método de spin coating e calcinados a 500 e 700 °C. Os filmes finos foram caracterizados por difração de raios-X (DRX), microscopia eletrônica de varredura por emissão de campo (MEV-FEG), microscopia de força atômica (MFA) e espectroscopia de reflectância difusa. As propriedades fo
Cerâmica. Publicado em: 2020-06
-
18. Additions and Corrections
The degradation of a pharmaceutical mixture (gemfibrozil, hydrochlorothiazide and naproxen) by TiO2/UV-A in different aqueous matrices was evaluated. The matrix components affected the operational conditions, rate constants, and removal efficiency of the pharmaceuticals, as well as toxicity. For sewage treatment plant effluent, a TiO2 concentration three-fol
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
19. Matrix Effects on the Degradation of Gemfibrozil, Hydrochlorothiazide, and Naproxen by Heterogeneous Photocatalysis
The degradation of a pharmaceutical mixture (gemfibrozil, hydrochlorothiazide and naproxen) by TiO2/UV-A in different aqueous matrices was evaluated. The matrix components affected the operational conditions, rate constants, and removal efficiency of the pharmaceuticals, as well as toxicity. For sewage treatment plant effluent, a TiO2 concentration three-fol
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
20. Effect of Growth Parameters on the Photocatalytic Performance of TiO2 Films Prepared by MOCVD
The present study evaluated the main factors that influence the photocatalytic activity of titanium dioxide (TiO2) films grown by metalorganic chemical vapor deposition (MOCVD) at 400 and 500 °C, in different growth times. The photocatalytic behavior was analyzed by measuring the methyl orange dye degradation at different pH values. Structural and morpholog
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
21. Synthesis, Characterization, and Synergic Photocatalytic Activity of Amorphous TiO2/Chitosan Carbon Microspheres
In this work, we report the synthesis and characterization of new amorphous graphene-like TiO2/chitosan carbon microspheres and its performance as photocatalyst. Four different carbon chitosan microspheres materials were obtained based on the distinctive procedure to incorporate TiO2 and TiOSO4 to chitosan structure by pyrolysis at 600 °C. Detailed characte
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
22. Effects of addition of engineered ZnO nanoparticles on the stability of colloidal suspensions containing TiO2 interacting with sandy soil
Abstract The stability of colloidal suspensions of engineered nanoparticles in the environment is of great interest for the risk assessment and treatment of hazardous materials. The relevance of this study is due to the evidence that engineered nanoparticles have been produced and used in commercial products in large scale, especially ZnO and TiO2, which are
REM, Int. Eng. J.. Publicado em: 2020-06
-
23. Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
Abstract Ferricyanide Fe(CN) 6 3- is one of the most stable cyanometallic complexes present in the gold mining effluents. This cyanocomplex is hard to degrade by natural attenuation and generates a negative impact on aquatic environments. Although free cyanide (CN-) can be obtained by acidifying the solution, the CN- is lethal for all forms of life. The oxid
REM, Int. Eng. J.. Publicado em: 2020-03
-
24. Synthesis, Characterization and Photocatalytic Activity of Au/SiO2@TiO2 Core-Shell Microspheres
By using HAuCl4 as the gold precursor, spherical Au@SiO2/TiO2 core-shell nanostructures were prepared with the sol-gel method and ethanol reflux. The preparation process was convenient and fast. The obtained samples were characterized by UV-Vis, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TE
J. Braz. Chem. Soc.. Publicado em: 2020-03