Tin Oxide
Mostrando 1-12 de 104 artigos, teses e dissertações.
-
1. Study of electrophoretic deposition of ZnO photoanodes on fluorine-doped tin oxide (FTO) glass for dye-sensitized solar cells (DSSCs)
Abstract Semiconductors, such as zinc oxide (ZnO), are used in different scientific fields, including energy. This study applied ZnO thin films on a photovoltaic cell, specifically a dye-sensitized solar cell (DSSC). ZnO was used in solar cells due to its characteristics such as electronic mobility. Electrophoretic deposition (EPD) is an efficient method to
Cerâmica. Publicado em: 2022
-
2. Tuning the Photocatalytic Activity of Tin Oxide through Mechanical Surface Activation
Tin oxide (SnO2) nanoparticles were synthesized by the co-precipitation method and mechanically modified by high-energy ball milling. The experimental results demonstrate that the collision with zirconia balls produces slight changes in the crystalline, electronic, morphological, and surface properties of SnO2, which lead to an increase in the redox potentia
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
4. Determination of 3,4,5-Trihydroxybenzoic Acid Exploiting a Visible-Light-Driven Photoelectrochemical Platform: Application in Wine and Tea Samples
The present work is based on the development and application of a photoelectrochemical method for the amperometric determination of 3,4,5-trihydroxybenzoic acid in different samples. The method is based on the use of a photoelectrochemical platform based on a glass slide coated with fluorine-doped tin oxide, which has been modified with cadmium sulfide and p
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. Light-Assisted Batch Injection Analysis of Glucose Exploiting a p-n-Homojunction Based on Cu2O
This work describes the development of a photoelectrochemical sensor for glucose quantification exploiting a light assisted-batch injection analysis (BIA) cell. A light-emitting diode (LED) lamp was employed to control the incidence of light on the p-Cu2O/n-Cu2O/fluorine-doped tin oxide (FTO) photoactive platform in BIA cell. The p-Cu2O/n-Cu2O/FTO platform w
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
6. Gold Nanoparticle/Tetrapyridylporphyrin Hybrid Material: Spectroscopic and Electrocatalytic Properties and Sensor Application
An electrocatalytic active hybrid material prepared by successive stepwise coordinative deposition of 20 nm diameter gold nanoparticles (AuNP) with 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on fluorine-doped tin oxide (FTO) substrates previously modified with 3-mercaptopropylsilane is described. Their interaction and assembly were studied by UV-Vis
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
7. Ações contra a Covid-19 na População com Síndrome de Down
An electrocatalytic active hybrid material prepared by successive stepwise coordinative deposition of 20 nm diameter gold nanoparticles (AuNP) with 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on fluorine-doped tin oxide (FTO) substrates previously modified with 3-mercaptopropylsilane is described. Their interaction and assembly were studied by UV-Vis
Arq. Bras. Cardiol.. Publicado em: 2020-11
-
8. Dendritic Gold Nanoparticles Towards Transparent and Electroactive Electrodes
Abstract: The combination of UV-visible absorption and electrochemical experiments (spectroelectrochemistry) enables to obtain highly specific spectroscopic information (in situ and operando) from modified surfaces. However, such application can be limited by the self-absorbance, for example, when metallic nanoparticles are present on modified surfaces. Indi
An. Acad. Bras. Ciênc.. Publicado em: 28/11/2019
-
9. Transmissive to Dark Electrochromic and Fluorescent Device Based on Poly(fluorene-bisthiophene) Derivative
Films of a poly(fluorene-bisthiophene) derivative, named PFBT, were electrodeposited onto indium tin oxide (ITO) electrodes and their electrochromic and fluorescence properties were investigated. Such films displayed color variation from yellow, in the neutral state, to green, in the oxidized state, as shown by tracking of the CIE (Commission Internationale
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
10. Facile One-Step Electrodeposition Fabrication of Amorphous MoS2 Catalysts in Titanium for Hydrogen Evolution Reaction
Hydrogen is seen as a future energy carrier that will assist the global energy fuel demand. However, it is still necessary to study efficient and inexpensive catalysts that can be used on a large scale to make this technology practical. In this paper the electrodeposition of molybdenum disulfide (MoS2) film on titanium (Ti) substrate was performed by cyclic
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
11. Application of SnO2 Nanoparticles and Zeolites in Coal Mine Methane Sensors
We evaluated solid-state sensors (MOS) manufactured using nanostructured tin oxide (SnO2) obtained by different synthesis methods for selectivity, response and repeatability at different operating temperatures and methane concentrations. In addition, Zeolite 13X pellets were placed in front of the sensors to improve CH4 selectivity in the presence of CO2. Th
Mat. Res.. Publicado em: 27/05/2019
-
12. COMPARATIVE STUDY OF TiO2 AND ZnO APPLICATION IN HYBRID SOLAR CELLS USING COPOLYMER P3OT/P3MT
Hybrid inorganic-organic solar cells are an attractive alternative energy source because of their low-cost production and ability to make use of a large amount of solar radiation available. This work aims to evaluate different solar cells composed of TiO2 and ZnO with P3OT/P3MT copolymer. Layers of semiconductor oxides were deposited on transparent fluorine-
Quím. Nova. Publicado em: 02/05/2019