Tin Dioxide
Mostrando 1-12 de 19 artigos, teses e dissertações.
-
1. Recombination Study of Dye Sensitized Solar Cells with Natural Extracts
Natural dyes can be used in dye sensitized solar cells (DSSCs) to generate low-cost devices, although with low light harvesting because of energy losses from the recombination process. This study investigates recombination reactions in DSSCs with natural dyes extracted from eggplants, plums, and hibiscus flowers. Titanium dioxide films were coated on a fluor
J. Braz. Chem. Soc.. Publicado em: 2019-02
-
2. Thin Tin and Tio2 Film Deposition in Glass Samples by Cathodic Cage
Thin nitride and titanium dioxide films were produced using an innovative technique called cathodic cage depositon. Uniformity, three-dimensionality and high rate deposition are some of the advantages of this technique. In this study we discuss the influences of temperature, treatment time and gaseous atmosphere on the characteristics of the deposited films.
Mat. Res.. Publicado em: 2015-04
-
3. Photo-Induced conductivity of heterojunction GaAs/Rare-Earth doped SnO2
Rare-earth doped (Eu3+ or Ce3+) thin layers of tin dioxide (SnO2) are deposited by the sol-gel-dip-coating technique, along with gallium arsenide (GaAs) films, deposited by the resistive evaporation technique. The as-built heterojunction has potential application in optoelectronic devices, because it may combine the emission from the rare-earth-doped transpa
Mat. Res.. Publicado em: 23/04/2013
-
4. ProduÃÃo de Filmes Finos de SnO2 pelo MÃtodo de Spray PirÃlise Utilizando um Forno a GÃs Natural com CombustÃo de FiltraÃÃo / Production of Thin Films of SnO2 by Spray Pyrolysis Method Using a Furnace Gas Oven with Combustion Filtration
O diÃxido de estanho (SnO2) em forma de filme fino pode ser produzido com grande transparÃncia à luz visÃvel e boa condutividade elÃtrica. Os filmes finos de SnO2 possuem muitas aplicaÃÃes tecnolÃgicas na indÃstria, principalmente em aparelhos eletrÃnicos que utilizam display de visualizaÃÃo, como em dispositivos em laboratÃrios de pesquisa. Uma
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/03/2012
-
5. Propriedades físicas do SnO2: defeitos, impurezas, ligas e superredes. / Physical properties of SnO2: defects, impurities, alloys and superlattices.
O dioxido de estanho na estrutura rutila (SnO2) é um semicondutor de gap largo e faz parte da classe dos óxidos condutores transparentes (TCO). Possui gap direto de 3,6 eV e condutividade do tipo n, mesmo quando não dopado intencionalmente. Estudos teóricos e experimentais atribuem este comportamento à presença de defeitos intrínsecos. Por outro lado,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/08/2011
-
6. Influence of pH of colloidal suspension on the electrical conductivity of SnO2 thin films deposited via Sol-Gel-Dip-Coating
Tin dioxide (SnO2) thin films are deposited by the dip-coating technique from colloidal suspensions prepared with distinct pH through the sol-gel method. The decrease of the pH contributes to the destruction of an electrical layer adjacent to particles in solution, leading to a high degree of aggregation among these particles due to the generation of cross-l
Materials Research. Publicado em: 04/03/2011
-
7. Reator de UV-Ozônio com lâmpada a vapor de mercúrio a alta pressão modificada para tratamento superficial de óxidos transparentes condutivos utilizados em dispositivos poliméricos eletroluminescentes
An UV-Ozone reactor was developed with an ignition tube extracted into HID mercury lamp used to irradiation on zinc oxide (ZnO) and fluorinated tin oxide (FTO) films for PLEDs devices. Different exposures times were used. In contact angle measurements revealed better results for ZnO and FTO by 15 and 5 min, respectively. In Diffuse Reflectance Infra-red Four
Química Nova. Publicado em: 2010
-
8. Estudo de materiais, estruturas de dispositivos e fenômenos de transporte em sistemas fotovoltaicos híbridos orgânico-inorgânico / Study of materials, device structures and transport phenomena in hybrid photovoltaic systems
Recently a fast development in organic and hybrid photovoltaic field has been observed. Such devices are fabricated by organic semiconductors within components of a heterojunction, in which bulk heterojunctions obtained via interpenetrating networks at the sub-20-nm length scale. It permits the effective collection of photogenerated charge carriers even with
Publicado em: 2010
-
9. PRODUÇÃO E CARACTERIZAÇÃO DE NANO PARTÍCULAS DO SISTEMA TI-N-O VIA REAÇÃO NA FASE VAPOR / PRODUCTION AND CHARACTERIZATION OF TIN NANO PARTICLES FROM VAPOR PHASE
Nitrides, especially those of transition metals, have received increasing attention in recent years because of their unique chemical and physical properties. Among them, TiN presents many interesting properties, which make it interesting for some potential industrial applications. The importance of nitride titanium (TiN) is due to its properties of high ther
Publicado em: 2008
-
10. APLICAÇÃO DE MOLÉCULAS AUTO-ORGANIZÁVEIS (SAM) EM FILMES FINOS DE SnO2 / APPLICATION OF SELF ASSEMBLED MOLECULES (SAM) IN THIN FILMS SnO2
Thin films of tin dioxide (SnO2) with the addition of doping are widely used because its various applications, so develop a search on this subject is of great value technology, since many different forms of doping, formulation and preparation, can be made and modified, intended to improve this material according to their physical and chemical properties. Thi
Publicado em: 2008
-
11. Analysis of Er3+ incorporation in SnO2 by optical investigation
Er3+ emission in the wide bandgap matrix SnO2 is observed either through a direct Er ion excitation process as well as by an indirect process, through energy transfer in samples codoped with Yb3+ ions. Electron-hole generation in the tin dioxide matrix is also used to promote rare-earth ion excitation. Photoluminescence spectra as function of temperature ind
Brazilian Journal of Physics. Publicado em: 2006-06
-
12. INFLUENCE OF SYNTHESIS CONDITIONS ON PHYSICOCHEMICAL PROPERTIES OF SNO2 / INFLUÊNCIA DOS PARÂMETROS DE SÍNTESE SOBRE PROPRIEDADES FÍSICO-QUÍMICAS DE SNO2
Resultados de testes preliminares para a reação de obtenção de formaldeído a partir de metóxi metano (DME) utilizando um catalisador Mo/SnO2 indicaram a necessidade de sistemas altamente ativos. Considerando-se que espécies dispersas de Mo parecem ser as mais efetivas para essa reação, e que a obtenção dessas espécies deve ser favorecida com o us
Publicado em: 2005