Time And Process
Mostrando 1-12 de 6999 artigos, teses e dissertações.
-
1. Impact of fuel quantity on luminescence properties of Sr3Al2O6:Eu by combustion synthesis
Abstract The photoluminescent behavior of Eu-doped Sr3Al2O6 obtained by highly efficient solution combustion synthesis is reported. In order to understand the influence of the fuel on the synthesis, the stoichiometric quantity and an excess of fuel were evaluated. By adjusting the amount of fuel, different luminescence responses were obtained, allowing europ
Cerâmica. Publicado em: 2023
-
2. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
3. Foley catheter plus misoprostol versus misoprostol alone for labor induction
SUMMARY OBJECTIVE: This study aimed to analyze the effects of Foley catheter combined with misoprostol in the labor induction process. METHODS: This is a nonblinded, block randomized, controlled trial that compared the association between transcervical Foley catheter/vaginal misoprostol 25 μg combination and vaginal misoprostol 25 μg alone in normal-risk
Revista da Associação Médica Brasileira. Publicado em: 2023
-
4. Rethinking abusive supervision: antecedents and reparative mechanisms of abusive supervision, including supervisor frustration, coworker support, guilt, and supervisor OCB in a mediated-moderation model
Abstract Purpose Drawing on affective events theory, this study positions role overload and supervisor frustration as antecedents of abusive supervision, leading to supervisor-led organizational citizenship behavior. In a mediated-moderation-sed analysis, we question whether coworker support moderates the relationship between supervisor frustration and abus
Revista Brasileira de Gestão de Negócios. Publicado em: 2023
-
5. DRYING CHARACTERISTICS AND QUALITY ANALYSIS OF HOT AIR-ASSISTED RADIO FREQUENCY AND HOT-AIR DRYING OF JUJUBE ( Zizyphus jujube Miller cv. Jinsixiaozao )
ABSTRACT Radio frequency (RF) drying is a rapid dehydration technique that reduces water activity and extends the shelf life of agricultural products. In this study, the drying characteristics of jujube during HARF and hot air (HA) were investigated, and quality analyses, such as color, vitamin C (VC) and total flavonoid content (TFC), of jujube were perform
Engenharia Agrícola. Publicado em: 2022
-
6. Short-term mine scheduling targeting stationary grades
Abstract In short-term mine planning, mining scheduling is generally defined by designing dig-lines, allocated on benches. The mined ore will be sent to stockpiles, homogenization piles, or a concentration plant. The process to design dig-lines is usually done manually, whereby multiple simultaneous mining fronts are time-consuming and labour-intensive. The
REM - International Engineering Journal. Publicado em: 2022
-
7. THE INFLUENCE OF THE FILM FORMED ON THE PRATO CHEESE SURFACE DURING THE NACL AND KCL SALTING PROCESS: APPLICATION OF THE FINITE ELEMENT METHOD AND NEURAL NETWORKS OF THE SELF-ORGANIZING MAP (SOM) AND MULTILAYER PERCEPTRON (MLP) TYPES
Sodium chloride is used in the cheese salting process as it promotes sensory changes and food preservation. However, in excess can cause hypertension problems, and for this reason, it has been partially replaced by potassium chloride. In the present work, Prato cheese was subjected to joint diffusion of NaCl and KCl by immersion in static and stirred brine.
Química Nova. Publicado em: 2022
-
8. Heterogeneous Fenton-like catalytic degradation of phenazine dye over CeO2 (CP-2) nanoscale powder
Abstract A heterogeneous Fenton-like process was explored for oxidation of phenazine dye using ceria polishing material (CP-2). XRD, SEM, FTIR, UV-vis DRS, and pHPZC techniques were applied to characterize the catalyst features. The performance of the heterogeneous Fenton-like process was investigated under various parameters (reaction time, pH, H2O2 concent
Cerâmica. Publicado em: 2022
-
9. Fuzzy Boundary for Beams Vibrations in Vehicles
ABSTRACT This work aims to study the transversal motion of a car’s chassis, modeled by a beam and supported at its ends by two sets of spring-damper elements. A finite differences method is utilized along with Robin boundary conditions to solve the mathematical modeling. The constants of the boundary conditions are modeled by a fuzzy parameter obtained thr
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
10. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
11. Cascade Modeling of the Measuring System Used to Assess S-Parameters of Anchor Rods on Power Transmission Lines Guyed Towers
Abstract The structural condition of the cable-stayed towers anchorage on power transmission lines requires constant monitoring. Maintenance routines must be able to identify faulty anchor rods and substitute them to avoid tower collapses and power delivery interruptions. Modern statistical diagnostic systems based on machine learning requires the generation
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
12. Semi-analytical Equations for Designing Terahertz Graphene Dipole Antennas on Glass Substrate
Abstract Semi-analytical equations are developed for aiding the process of designing terahertz graphene-based rectangular dipole antennas lying on glass substrates. It directly provides the dipole length required for obtaining resonance at a desired frequency since antenna width and graphene chemical potential are known. By using the finite-difference time-d
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022