Three Dimensional Modeling
Mostrando 25-36 de 227 artigos, teses e dissertações.
-
25. Dynamic and static analysis of FGM skew plates with 3D elasticity based graded finite element modeling
The present article deals with static and dynamic behavior of functionally graded skew plates based on the three-dimensional theory of elasticity. On the basis of the principle of minimum potential energy and the Rayleigh Ritz method, the equations of motion are derived in conjunction with the graded finite element approach. Solution of the resulted system o
Lat. Am. j. solids struct.. Publicado em: 2014-05
-
26. Preliminary analysis of knee stress in Full Extension Landing
OBJECTIVE: This study provides an experimental and finite element analysis of knee-joint structure during extended-knee landing based on the extracted impact force, and it numerically identifies the contact pressure, stress distribution and possibility of bone-to-bone contact when a subject lands from a safe height. METHODS: The impact time and loads were
Clinics. Publicado em: 2013-09
-
27. Técnica de realidade virtual para manipulação e deformação de superfícies NURBS
The Virtual Reality (VR) mainly deals with the creation of three-dimensional environments generated in real time and made available for multisensory interaction with different devices. A high processing capacity and modeling environments is required for applications of this nature. These applications currently extend to various productive sectors such as ind
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/10/2012
-
28. Modelagem 3D para a determinação do comprimento de arcos elétricos usando imagens estereoscópicas = : 3D modeling for determination of lenght of electrical arcs using stereo images / 3D modeling for determination of lenght of electrical arcs using stereo images
O comprimento do arco elétrico é um parâmetro importante para a modelagem matem ática do arco elétrico. O perfil da variação do comprimento do arco atualmente é estimado pela análise da tensão medida entre os terminais do arco e da corrente do arco. Porém esses resultados não são conclusivos, pois não apresentam uma medição (escala métrica)
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/07/2012
-
29. Planejamento, síntese e avaliação da atividade anti-T. cruzi de derivados furfurilidênicos com estruturas azometínica e oxadiazolínica / Design, synthesis, identification and anti-Trypanosoma cruzi activity evaluation of furfurylidene azomethine and oxadiazole derivatives
The search for alternative therapies for the treatment of Chagas disease presents great importance, since there are only two currently available drugs, nifurtimox and benznidazole. Both have considerable adverse effects and, in Brazil, is used only benznidazole. Nitro-heterocyclic compounds with activity against Trypanosoma cruzi, the causative agent of Chag
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/06/2012
-
30. Técnicas de bioinformática aplicadas ao estudo de poligalacturonases de fungos
Plant cell walls are composed of approximately 65% cellulose microfibrils and pectin. The latter is proteolytically degraded by the so-called pectinases enzymes (also known as pectinolytic enzymes). Pectinases may be either depolymerizing. They are produced by plants, filamentous fungi, bacteria, and yeast. Due to the wide commercial use of pectinase, one ha
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/04/2012
-
31. Proposta de traduÃÃo dos princÃpios da coordenaÃÃo modular em parÃmetros aplicÃveis ao building information modeling. / Study for the translation of the modular coordination principles for the building information modeling parameters
Due to changes occurring in the Civil Construction scenario, it is important to emphasize the challenge to achieve the growing demand for housing and overcome deficiencies of the sector related to productivity and the reliability of the products, from design to construction. In this context, Modular Coordination and Building Information Modeling (BIM) emerge
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/04/2012
-
32. Modelos numéricos de vigas mistas de aço e concreto pertencentes a sistemas de pisos mistos de pequena altura em situação de incêndio / Numerical modelling of composite slim floor beams in fire
Slim floor frames consists on structural system in which the steel beam is completely or partially inserted in a concrete slab, that is usually used in profiled steel decks systems. The main goal of the slim floor systems is to obtain a minimum height of the composite beam section and, consequently, achieve a higher height of the floor or a lower total heigh
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/03/2012
-
33. A study on the extension of an upwind parallel solver for turbulent flow applications
The present work is primarily concerned with studying the influence of an upwind spatial discretization on the capability of representing turbulent flows on aerospace applications, in the context of a flow simulation code that is fairly close to a production code. Therefore, the work addresses the issues of implementing and validating an advanced turbulence
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/02/2012
-
34. Three-dimensional numerical modeling of RTM and LRTM processes
Resin Transfer Molding (RTM) is a manufacturing process in which a liquid resin is injected into a closed mold pre-loaded with a porous fibrous preform, producing complex composite parts with good surface finishing. Resin flow is a critical step in the process. In this work, the numerical study of the resin flow in RTM applications was performed employing a
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-06
-
35. Does the contact time of alginate with plaster cast influence its properties?
The aim of this study was to verify the influence of the time of contact between alginate and gypsum after the modeling procedure on the properties of the plaster cast, such as surface detail, dimensional stability and microhardness. Thirty cylindrical specimens of orthodontic gypsum Type III were made by means of impressions of a stainless steel master mode
Brazilian Oral Research. Publicado em: 20/03/2012
-
36. Diversity and three-dimensional structures of the alpha Mcr of the methanogenic Archaea from the anoxic region of Tucuruí Lake, in Eastern Brazilian Amazonia
Methanogenic archaeans are organisms of considerable ecological and biotechnological interest that produce methane through a restricted metabolic pathway, which culminates in the reaction catalyzed by the Methyl-coenzyme M reductase (Mcr) enzyme, and results in the release of methane. Using a metagenomic approach, the gene of the a subunit of mcr (mcrα) was
Genetics and Molecular Biology. Publicado em: 20/01/2012