Three Dimensional Heat Conduction
Mostrando 1-9 de 9 artigos, teses e dissertações.
-
1. Transient heat conduction in multiwall carbon nanotubes
In this paper, theoretical investigation is performed on two-dimensional transient heat conduction in multiwall carbon nanotubes (MWCNTs) by using a continuum model. Temperature, size and direction dependencies of thermal properties are considered. Both Fourier and non-Fourier heat conduction approaches are used and finite element models are developed to sol
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
2. Thermal effusivity estimation of polymers in time domain
An accurate knowledge of thermophysical properties is very important, for example, to optimize the engineering design and the development of new materials for many applications. Thermal effusivity is a thermal property which presents an increasing importance in heat conduction problems. This property indicates the amount of thermal energy that a material is
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-12
-
3. Estudos de processos térmicos decorrentes da usinagem: aplicação de problemas inversos em furação / Thermal studies of cutting process. Inverse problem application in drilling
Heat generation is a common problem during any type of cutting, but particularly during a drilling due to the difficulty of conducting heat away from the cutting edge and the fact that the chips remain in contact with the tool for a relatively long time in a hole. Cutting temperatures have strongly influenced both the tool life and the metallurgical state of
Publicado em: 2009
-
4. Modelo térmico para a solução de problemas inversos em transferência de calor com aplicação em um processo de usinagem por torneamento / Thermal model for the solution of inverse problems in heat conduction with application in machining process
Durante o torneamento a energia mecânica é convertida em calor através da deformação plástica do cavaco e do atrito entre a ferramenta e a peça. O calor conduzido na ferramenta de corte resulta em altas temperaturas na interface de contato. A partir do conhecimento destas temperaturas é possível avaliar de uma forma mais eficiente o desgaste da ferr
Publicado em: 2008
-
5. Determinação do campo de temperatura em ferramentas de corte durante um processo de usinagem por torneamento / Cutting temperature estimation during a machining process
Durante a usinagem de metais, altas temperaturas são geradas na interface de cavacoferramenta. Essas temperaturas, por sua vez, têm forte influência no controle da taxa de remoção de material e no atrito entre o cavaco e a ferramenta de corte. Observa-se, entretanto que a medição direta de temperaturas nessa região é de difícil execução devido ao
Publicado em: 2005
-
6. Convecção natural tridimensional sobre fontes de calor discretas
In this work, the electronic component cooling is focused, aiming the understanding of the three-dimensional effects present in the natural convection on discrete or pontual heat sources. The finite volume method, implemented in the FLUENT package, was used to simulate the heat transfer processo The steady state flow was considered laminar and the properties
Publicado em: 2003
-
7. Heat Source Estimation with the Conjugate Gradient Method in Inverse Linear Diffusive Problems
In this work, we present the solution of a class of linear inverse heat conduction problems for the estimation of unknown heat source terms, with no prior information of the functional forms of timewise and spatial dependence of the source strength, using the conjugate gradient method with an adjoint problem. After describing the mathematical formulation of
Journal of the Brazilian Society of Mechanical Sciences. Publicado em: 2001
-
8. Modelagem tridimensional de problemas inversos em condução de calor: aplicação em problemas de usinagem / Three-dimensional modeling of inverse heat conduction problems: application in machining problems
O objetivo deste trabalho é propor uma metodologia para a obtenção da distribuição da temperatura na superfície de corte da ferramenta em um processo de usinagem por torneamento. Nesse sentido, o problema térmico de usinagem é caracterizado de maneira bem realista através de uma abordagem tridimensional. Para a obtenção dos campos térmicos na reg
Publicado em: 2001
-
9. Desenvolvimento de um sistema de estereolitografia termica em tres dimensões na construção de prototipos com a aplicação do laser de CO2
We present in this work the use of infrared laser radiation to anchieve localized curing in thennosensitive polymers. In stereolithography the objective is to cure a localized region in a material by precisely confining the laser energy to the area that is to be cured. Industry already employs high-power ultraviolet laser radiation (HeCd laser @ 0,352 ~m) to
Publicado em: 2001