Thin Structures
Mostrando 1-12 de 360 artigos, teses e dissertações.
-
1. Finite strip method computer application for buckling analysis of thin-walled structures with arbitrary cross-sections
Abstract The Direct Strength Method (DSM) is a well-known formulation presented in the Brazilian standard ABNT NBR 14762:2010, that estimates the strength capacity of cold-formed steel (CFS) members. However, this formulation requires the elastic critical buckling loads as point of departure, regarding local (L), distortional (D) and global (G) modes, which
REM, Int. Eng. J.. Publicado em: 2021-09
-
2. Deduction of Electric Field Module in a Multilayer of Isotropic Materials to Detect Surface Plasmons with a Graphical User Interface
Abstract Electric field module for any isotropic multilayer thin film structure, is presented as analytical deduction. Analytic expressions for the electric field distribution are developed initially for a monolayer isotropic system based on Airy's formulae and boundary conditions, with an incident monochromatic source of light. The transfer matrix method 2�
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
3. HSCCC Separations of Rutin Esters Obtained by Enzymatic Reaction Catalyzed by Lipase
The flavonoid rutin presents several pharmacological effects, despite this, its application in the pharmaceutical industry can be significantly limited by its low bioavailability. The development of lipophilic derivatives by esterification of hydroxyl groups with fatty acid chains may be an effective strategy to change their physicochemical properties. This
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
4. Composite floor system with CFS trussed beams, concrete slab and innovative shear connectors
Abstract Steel and concrete floor systems are widely applied for buildings and provide excellent structural response, optimized material consumption, reduced beam height, and improved bending strength and stiffness capacity. In recent years, many experimental investigations concerned with new alternatives addressed to efficient interaction between steel and
REM, Int. Eng. J.. Publicado em: 2020-03
-
5. Review: deformation and optimisation crashworthiness method for foam filled structures
Abstract In this paper, we give overview of deformation modes for the uniform foam filled thin-walled structure such as circular tubes, square tubes, rectangular tubes, tapered tubes, hat tubes and cone tubes. Foam material is used as a reinforcing material on a thin wall tube which has potential as being a good energy absorber. This is evident from many of
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
6. A methodology to investigate the influence of the fillet radius on the buckling of integrally stiffened panels
Abstract The use of integrally stiffened panels (ISP's) in wings of small and medium-sized aircraft is frequent in aviation. These thin-walled structures are often subjected to compressive loads during their life-time and, although the finite element method has become an important tool for engineers to obtain the buckling load of structural members, some res
Lat. Am. j. solids struct.. Publicado em: 22/07/2019
-
7. An efficient general curvilinear coordinates finite element method for the linear dynamic study of thickness-independent shells
Abstract yyTo date, a large number of finite element methods have been developed to study the dynamics of shell structures. Most of them are generally based on the degenerated solid approach and other less in shell theories, but introducing, in this last case, some assumptions to analyze this problem: some of them refer to shallow shells (slightly curved she
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
8. Effect of Semi-Apical Angle on the Crush Mechanics of Metallic Bi-Tubular Tubes under Dynamic Axial Loading
ABSTRACT Aerospace and automotive industrial advancement demands high energy absorbing structures for the human and equipement safety during transportaion and accidental emergencies. Thin-walled metallic tubes applications in the structures serve the purpose by absorbing energy during such dynamic scenarios. A new concept is presented in this study, involvin
Matéria (Rio J.). Publicado em: 20/05/2019
-
9. An Amorphous Silicon Photo TFT with Si3N4/Al2O3 or HfO2 Double Layered Insulator for Digital Imaging Applications
Abstract This paper focuses on amorphous silicon photo thin-film transistors with double layered insulator using Si3N4/Al2O3 or HfO2 as candidates for the succession of Si3N4 as a traditional insulator in the fabrication of hydrogenated amorphous silicon thin-film transistors. Whether for industry or for research, there is a need to investigate the use of th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2019-03
-
10. Theoretical Study of Plasmonically Induced Transparency Effect in Arrays of Graphene-Based Double Disk Resonators
Abstract In this paper, we consider coupled disk-shaped resonators separated by a thin dielectric substrate that can be used as frequency-tunable filters or as electromagnetic switches in the terahertz frequency band. The two disks are electromagnetically coupled and resonate with dipole plasmonic modes. By using a Temporal Coupled-Mode Theory based approach
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2019-03
-
11. Method to Determine the Root Canal Anatomic Dimension by using a New Cone-Beam Computed Tomography Software
Resumo Este estudo discute um método para determinar a dimensão anatômica do canal radicular usando o software e-Vol DX. A metodologia consiste em inicialmente estabelecer as posições corretas que serão medidas, definir o ponto na borda da estrutura anatômica e ajustar a posição intermediária na escala de cinza na imagem em tomografia computadoriza
Braz. Dent. J.. Publicado em: 2019-02
-
12. Synthetic granite composite for precision equipment structures
ABSTRACT The structure is a component that plays an extremely important role in the equipment’s performance, it must withstand efforts without compromising the function, receive and transfer heat, dampen vibrations and position the elements, as well as promote ergonomics and aesthetics. In lightweight and precision equipment’s the raw material used must
Matéria (Rio J.). Publicado em: 06/12/2018