Thermoplastic Starch
Mostrando 1-12 de 39 artigos, teses e dissertações.
-
1. Effects of Gamma Radiation on the Properties of the Thermoplastic Starch/Poly (Butylene Adipate-co-Terephthalate) Blends
The development of blends made from matrices of synthetic biodegradable polymers, and natural additives, are considered less environmentally aggressive materials. This work aimed to study the effects of gamma radiation on the properties of the thermoplastic starch (TPS)/poly(butylene adipate-co-terephthalate) (PBAT). In this work, blends of TPS/PBAT were pre
Mat. Res.. Publicado em: 14/10/2019
-
2. Avaliação do efeito do agente compatibilizante (PP-g-MA) em misturas PP/Amido termoplástico
RESUMO O crescente desperdício de materiais plásticos no meio ambiente juntamente com a preocupação com a futura escassez do petróleo tem aumentado o interesse por polímeros biodegradáveis, como o amido. Nos últimos anos, o amido tem sido utilizado em misturas com diferentes polímeros sintéticos. Essas misturas têm sido compatibilizadas por meio d
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Efecto de la adición de bentonita sobre las propiedades ópticas de diferentes materiales compuestos poliméricos
ABSTRACT In this work, composite materials were obtained by the incorporation of bentonite to biodegradable and synthetic polymeric matrices. Commercial (BE) and natural (BM) bentonite samples were employed, as well as three different polymeric matrices: thermoplastic corn starch (TPS), high density polyethylene (HDPE) and a poly(styrene-b-butadiene-b-styren
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Película biodegradable de almidón de maíz termoplástico y quitosano con actividad antimicrobiana empleada como envase activo
ABSTRACT One of the research lines related to active packaging takes into account the incorporation of antimicrobial agents such as chitosan, a polysaccharide derived from the crustaceans’ exoskeleton. However, because of chitosan high molar mass, its diffusion from the package to the food surface is restricted, so the use of oligomers is an interesting bu
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Polyvinyl alcohol (PVA) molecular weight and extrusion temperature in starch/PVA biodegradable sheets
Abstract The aim of this work was to study the relationship of chain size of partially hydrolyzed PVA blended with starch in properties of biodegradable sheets produced by thermoplastic extrusion. It was also studied the effect of extrusion temperature profile to determine the better PVA chain size and temperature profile to produce biodegradable sheets thr
Polímeros. Publicado em: 10/07/2018
-
6. Effect of PVA and PDE on selected structural characteristics of extrusion-cooked starch foams
Abstract The aim of this work was to determine selected physical properties of biodegradable thermoplastic starch (TPS) filling foams manufactured by extrusion-cooking technique from different combinations of potato starch and two additives: poly(vinyl alcohol) PVA and Plastronfoam PDE. Foams were processed with seven starch/additives combinations at two di
Polímeros. Publicado em: 15/03/2018
-
7. Influence of addition of silanized nanosilica and glycerol on hydrophobicity of starch using a factorial design
Abstract The thermoplastic starch (TPS) is regarded as a promising material for manufacturing packaging and products with biodegradable properties. This study aimed at obtaining hydrophobic starch using silanized silica nanoparticles (nSS) with hexamethyldisilazane. A factorial design 22 with central point was developed to evaluate the influence of glycerol
Polímeros. Publicado em: 21/09/2017
-
8. Thermoplastic Waxy Starch Films Processed by Extrusion and Pressing: Effect of Glycerol and Water Concentration
Thermoplastic starch properties depends of plastification process. The aim of this study was to analyze the effect of concentration of glycerol and water on plastification, glass transition temperature (Tg) and tensile properties of thermoplastic waxy starch (TPWS). Formulations were extruded in the following concentrations of starch/glycerol/water: 70/30/0
Mat. Res.. Publicado em: 31/08/2017
-
9. Influence of microcrystalline cellulose in thermoplastic starch/polyester blown films
Abstract This work investigated the influence of microcrystalline cellulose (MCC) in thermoplastic starch/poly (butylene adipate-co-terephthalate) films produced by blown extrusion, using different MCC contents (4, 7 and 10 g.100 g-1). The films were characterised for their mechanical, structural and barrier properties. Increasing fibres concentration reduce
Polímeros. Publicado em: 29/06/2017
-
10. Nanocomposites Based on Cassava Starch and Chitosan-Modified Clay: Physico‑Mechanical Properties and Biodegradability in Simulated Compost Soil
Organic-inorganic nanocomposites based on cassava starch, glycerol and chitosan-modified Veegum® HS clay mineral at two different low polymer-to-clay ratios (2.5 and 5.0 wt.%) were prepared by extrusion producing flexible, transparent and homogeneous plastics as potential candidates for agricultural purposes. X-ray diffraction and transmission electron micr
J. Braz. Chem. Soc.. Publicado em: 2017-04
-
11. The effect of gelatin amount on the properties of PLA/TPS/gelatin extruded sheets
Abstract Films and sheets composed by poly (lactic acid) (PLA)/thermoplastic starch (TPS) and TPS/gelatin blends have already been produced and characterized in the literature. However, materials produced with these three biopolymers have not been clearly investigated. In this work, extruded sheets were produced with PLA, TPS (glycerol as plasticizer) and di
Polímeros. Publicado em: 2017-03
-
12. Poly(lactic acid)/thermoplastic starch sheets: effect of adipate esters on the morphological, mechanical and barrier properties
Abstract Blends of poly(lactic acid) (PLA) and thermoplastic starch (TPS) plasticized with adipate esters (diisodecyl adipate and diethyl adipate) having different molecular weight were used to produce sheets. The calendering-extrusion process at a pilot scale was used, and the mechanical, barrier, and morphological characterization of the obtained materials
Polímeros. Publicado em: 04/03/2016