Thermal Spray
Mostrando 13-24 de 68 artigos, teses e dissertações.
-
13. Repairing of an Engine Block Through the Cold Gas Dynamic Spray Technology
In the modern automotive industry, the maintenance of the vehicle during its life cycle is increasing in importance due to both economical and environmental considerations. A new frontier is the reparation of large parts, originally made by fusion, by the addition of material. The standard technique in the field is the use of TIG welding, but in the last few
Mat. Res.. Publicado em: 26/09/2016
-
14. ENCAPSULAÇÃO DO ÁCIDO L-ASCÓRBICO NO BIOPOLÍMERO NATURAL GALACTOMANANA POR SPRAY‑DRYING: PREPARAÇÃO, CARACTERIZAÇÃO E ATIVIDADE ANTIOXIDANTE
AbstractIn this study, the spray drying technique was used to prepare L-ascorbic acid (AA) microparticles encapsulated with galactomannan-an extract from the seeds of the Delonix regia species. The physico-chemical characteristics, antioxidant activity, and encapsulation efficiency of the AA microparticles were evaluated and characterized using thermogravime
Quím. Nova. Publicado em: 2015-08
-
15. Optimization of the Deposition Parameters of HVOF FeMnCrSi+Ni+B Thermally Sprayed Coatings
AbstractHVOF thermal spray process produces coatings with low porosity and low oxide content, as well as high substrate adhesion. Small variations on the parameters of the HVOF process can generate coatings with different characteristics and properties, which also is chemical composition depended of the alloy. FeMnCrSi alloy is a cavitation resistant class o
Soldag. insp.. Publicado em: 2015-06
-
16. TAG, DAG and FFA profiles of dry-cured ham by easy ambient sonic-spray ionization mass spectrometry after thermal imprinting
Espectrometria de massas ambiente com ionização por sonic-spray (EASI-MS), uma técnica de espectrometria de massas ambiente recém desenvolvida, foi diretamente utilizada para a obtenção do perfil de triacilgliceróis (TAG), diacilgliceróis (DAG) e ácidos graxos livres (FFA) em diferentes tipos de presuntos crus curados, após impressão térmica. A t
J. Braz. Chem. Soc.. Publicado em: 2014-09
-
17. Niobium and niobium-iron coatings on API 5LX 70 steel applied with HVOF
The present study aimed to create and characterize niobium and niobium-iron 60% coatings applied to steel API 5L X70 using the hypersonic thermal spray process (HVOF). The morphologies of the coatings were analyzed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and profilometry, while the coatings' har
Mat. Res.. Publicado em: 27/06/2014
-
18. Environmental Effects on Thermal Properties of PEI/Glass Fiber Composite Materials
ABSTRACT: The aim of this study was to investigate the effects of hygrothermal exposure, ultraviolet (UV) radiation, salt spray and thermal shock aging on the thermomechanical behavior of glass fiber reinforced by poly (ether-imide) (PEI) composites. Dynamic mechanical (DMA) and Thermomechanical (TMA) analyses have been performed on the aged PEI composites a
J. Aerosp. Technol. Manag.. Publicado em: 2013-06
-
19. A comparative leakage study on Er,Cr: YSGG laser- and bur- prepared Class V cavities restored with a low-shrinkage composite using different filling techniques
AIM: To evaluate the leakage on Er,Cr:YSGG laser- and bur- prepared Class V cavities restored with a silorane-based composite resin using different insertion techniques METHODS: 40 cavities were outlined according to: the type of instrument [Er,Cr:YSGG laser (3.0 W power, energy per pulse of 150 mJ, fluence of 53.57J/cm², pulse duration of 140-200 ∝s, 20
Braz. J. Oral Sci.. Publicado em: 2013-06
-
20. Preparation of piroxicam microparticulated solid dispersions by spray congealing / Obtenção de dispersões sólidas microparticuladas de piroxicam por spray congealing
O piroxicam (PRX) e um antiinflamatorio nao esteroidal com propriedades analgesicas, antiinflamatorias e antipireticas pertencente a classe II do SCB. Farmacos desta classe apresentam como etapa limitante da sua absorcao a sua dissolucao, uma vez que possuem baixa solubilidade e alta permeabilidade. Assim, o aumento da solubilidade e da taxa de dissolucao do
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/03/2012
-
21. LaCrO3 composite coatings for AISI 444 stainless steel solid oxide fuel cell interconnects
Doped lanthanum chromite-based ceramics are the most widely used interconnector material in solid fuel cells (SOFC) since they exhibit significant electrical and thermal conductivity, substantial corrosion resistance and adequate mechanical strength at ambient and high temperatures. The disadvantage of this material is its high cost and poor ductility. The a
Mat. Res.. Publicado em: 23/10/2012
-
22. Effect of current and atomized grain size distribution on the solidification of Plasma Transferred Arc coatings
Plasma Transferred Arc (PTA) is the only thermal spray process that results in a metallurgical bond, being frequently described as a hardfacing process. The superior properties of coatings have been related to the fine microstructures obtained, which are finer than those processed under similar heat input with welding techniques using wire feedstock. This ob
Mat. Res.. Publicado em: 16/08/2012
-
23. Rapid solidification of an Al-5Ni alloy processed by spray forming
Recently, intermetallic compounds have attracted much attention due to their potential technological applications as high-temperature materials. In particular the intermetallic compounds, associated with the Al-Ni binary system stand out as promising candidates for high-temperature materials for the use in harsh environments. It is expected that a bulk Al-Ni
Mat. Res.. Publicado em: 08/05/2012
-
24. Electrical conductivity and thermal properties of functionalized carbon nanotubes/polyurethane composites
Multi-walled carbon nanotubes (MWCNTs) functionalized with amine and carboxyl groups were used to prepare polyurethane/MWCNT nanocomposites in two distinct concentrations: a lower value of 1 mass% (spray coating) and a higher one of ~50 mass% (buckypaper based). The MWCNT-NH2 sample contained only 0.5 mass% of amine groups, whereas MWCNT-COOH contained 5 mas
Polímeros. Publicado em: 13/03/2012