Thermal Resistance
Mostrando 1-12 de 495 artigos, teses e dissertações.
-
1. Thermal characterization of soil-cement bricks using mining tailings
Abstract Soil-cement bricks are earth construction materials that have been gaining prominence due to their environmental advantages. The Brazilian Technical Standard NBR 8491 establishes physical and mechanical procedures to characterize these bricks. However, the thermal characterization is an important assessment, since it is related to the building’s t
REM - International Engineering Journal. Publicado em: 2022
-
2. The importance of education
Abstract The present research is dedicated to analyzing the addition of sawdust biomass, which is a carbonaceous raw material that may be used in coal blends for the production of metallurgical coke, preserving the required quality, with lower cost. The quality of metallurgical coke may be determined by the efficiency of its chemical, physical and thermal fu
REM, Int. Eng. J.. Publicado em: 2021-06
-
3. Quality evaluation of metallurgical coke produced with sawdust and different mixtures of coal
Abstract The present research is dedicated to analyzing the addition of sawdust biomass, which is a carbonaceous raw material that may be used in coal blends for the production of metallurgical coke, preserving the required quality, with lower cost. The quality of metallurgical coke may be determined by the efficiency of its chemical, physical and thermal fu
REM, Int. Eng. J.. Publicado em: 2021-06
-
4. Microwave-Assisted Acid Digestion: Evaluation of Reaction Vessel Design and Performance
Nowadays, microwave-assisted procedures using closed vessels with thermal, chemical, and mechanical resistance are the state-of-the-art for efficient digestion of samples. Safety issues related to sample reactivity should be considered and analytical throughput is also a critical parameter. The choice of a specific vessel for a target application is not triv
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
5. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
6. Behavior of the effective heat transfer coefficient and global thermal resistance in freezing of fruit juice model solutions in cylindrical packages
Abstract In this study the effect of packing on freezing time, effective heat transfer coefficient and global thermal resistance were evaluated during the freezing of fruit juice model solution in an air blast freezer. Two configurations were arranged with 40 buckets and 15 kg of solution in each, totaling 600 kg. Thermocouples were installed to monitor the
Food Sci. Technol. Publicado em: 2020-12
-
7. HEAT-APPLICATOR MACHINE FOR WEED CONTROL
ABSTRACT Pesticide environmental risks and increased weed resistance have encouraged studies for alternatives to herbicides. Among these are weed thermal control methods by controlled heat application machines. Thus, this study aimed to test a prototype of heat-applicator machine as a function of changes in gas pressure, travel speed, and tire traffic effect
Eng. Agríc.. Publicado em: 2020-10
-
8. Editorial Comment: Effects of testicular dysgenesis syndrome components on testicular germ cell tumor prognosis and oncological outcomes
ABSTRACT Pesticide environmental risks and increased weed resistance have encouraged studies for alternatives to herbicides. Among these are weed thermal control methods by controlled heat application machines. Thus, this study aimed to test a prototype of heat-applicator machine as a function of changes in gas pressure, travel speed, and tire traffic effect
Int. braz j urol.. Publicado em: 2020-10
-
9. BEHAVIOR OF THERMALLY MODIFIED WOOD TO BIODETERIORATION BY XYLOPHAGE FUNGI
ABSTRACT Thermally modified wood undergoes chemical, physical, and mechanical modifications, resulting in changes in resistance to wood biodegrading agents. The objective of this study was to evaluate the resistance to biodeterioration of thermally modified wood by the industrial process VAP HolzSysteme® of Eucalyptus grandis, Pinus taeda and Tectona grandi
CERNE. Publicado em: 2020-09
-
10. STUDY OF THERMAL EXPANSION AND COMPRESSION STRENGTH OF THREE WOOD SPECIES FROM PLANTATIONS
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
CERNE. Publicado em: 2020-06
-
11. Inflammatory segmental vitiligo during oral isotretinoin use: a casual association?,
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
An. Bras. Dermatol.. Publicado em: 2020-06
-
12. BACTERIAL NANOCELLULOSE BIOMEMBRANE AS A SUPPORT FOR HUMAN INSULIN AIMING AT TRANSDERMAL PERMEATION
Production of bacterial nanocellulose was pursued as a matrix system for the stabilization of human insulin. The biomembranes produced by Gluconacetobacter hansenii were washed with 2% aqueous sodium dodecylsulfate solution, rinsed with ultrapure water and immersed in 1 mol L-1 NaOH aqueous solution at 60 °C for 90 min until neutralization. For the insulin
Quím. Nova. Publicado em: 2020-05