Thermal Insulation
Mostrando 1-12 de 70 artigos, teses e dissertações.
-
1. Economic viability of a thermal blanket produced from asphalt waste used in roof covering
RESUMO Este trabalho apresenta os resultados obtidos em um projeto de construção civil, no qual se dimensiona a isolação térmica do telhado de uma pousada na região de São Joaquim, SC, considerada uma das regiões mais frias do Brasil. Propôs-se o uso de um isolante produzido à base de asfalto reciclado, apontando sua eficiência de isolação térm
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Production of Carbon Foams from Rice Husk
The production of a material with rigid, multifunctional three-dimensional porous structure at a low cost is still challenging to date. In this work, a light and rigid carbon foam was prepared using rice husk as the basic element through a simple fermentation process followed by carbonization. For the fermentation process, the amount of biological yeast (7.5
Mat. Res.. Publicado em: 11/11/2019
-
3. Comportamento térmico de compósitos de poliestireno reciclado reforçado com celulose de bagaço de cana
RESUMO O poliestireno expandido (EPS) é um polímero reciclável amplamente utilizado na fabricação de embalagens para isolamento acústico, proteção de bens de consumo duráveis e na indústria da construção civil. O PS é facilmente reciclável com o aumento da temperatura, podendo dar origem a novos materiais. Entretanto suas propriedades térmicas
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Thermal simulation of prisms with concrete blocks in a fire situation
Resumo O presente trabalho tem como objetivo verificar a capacidade de isolamento térmico de alvenarias constituídas por blocos de concreto em situação de incêndio por meio da simulação térmica de prismas. Inicialmente, para a validação das propriedades térmicas do bloco com um experimento fornecido por uma empresa, foi simulado um prisma com reve
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
5. Studies on Heat Flux Imparted on Thermal Insulation Inside Rocket Motor Containing Double Base Propellant
ABSTRACT Thermal insulation inside the rocket motor experience severe pressure and temperature conditions. Experimental determination of heat flux imparted to thermal insulator inside the rocket motor during the static firing is a challenging task. This paper reports experimental determination of heat flux for double base propellant (DBP) in small rocket mot
J. Aerosp. Technol. Manag.. Publicado em: 10/07/2019
-
6. Desempenho térmico-acústico-mecânico de um compósito de matriz cimentícia leve reforçado com casca de arroz
RESUMO Visando desenvolver um novo produto com bom desempenho térmico-acústico-mecânico para servir como alternativa aos materiais comumente utilizados para vedação, foi produzido um compósito a partir de uma matriz cimentícia leve e casca de arroz. A matriz cimentícia consistindo em uma pasta de cimento com ar incorporado, que é intitulada por vár
Matéria (Rio J.). Publicado em: 10/06/2019
-
7. Quantification of Aerospace Polymer Blends by Thermogravimetric Analysis and Infrared Spectrometry
ABSTRACT Ethylene-propylene-diene elastomer (EPDM) is employed as thermal insulation for rocket motors, as well as EPDM blends with ethylene vinyl acetate (EVA) have been used in the aerospace industry. The quantification of these blends is more common using Fourier Transform Infrared Spectrometry (FT-IR) by transmission mode, but without discussing sample p
J. Aerosp. Technol. Manag.. Publicado em: 07/01/2019
-
8. Development and characterization of sustainable lightweight geopolymer composites
Resumo A produção de materiais de construção leves atrai a atenção dos cientistas em todo o mundo com a necessidade de reduzir o peso morto das estruturas, fornecer melhor isolamento térmico para edifícios e ter menor custo de transporte. O presente trabalho centrou na produção de compósitos geopoliméricos leves pela incorporação de pó de alum
Cerâmica. Publicado em: 2019-01
-
9. Sustainable Glass Foams Produced from Glass Bottles and Tobacco Residue
In this work, discarded soda-lime-silica glass bottles and tobacco residue (after oil extraction to produce biodiesel) were prepared in different formulations to obtain glass foams. The formulated compositions were homogenized and uniaxially compacted at 40 MPa then fired at 850 ºC and 900 ºC for 60 min to investigate the effects of tobacco residue and tem
Mat. Res.. Publicado em: 03/12/2018
-
10. Two-scale topology optimization of macrostructure and porous microstructure composed of multiphase materials with distinct Poisson’s ratios
Abstract Negative Poisson’s ratio (NPR) material attracts a lot of attentions for its unique mechanical properties. However, achieving NPR is at the expense of reducing Young’s modulus. It has been observed that the composite stiffness can be enhanced when blending positive Poisson’s ratio (PPR) material into NPR material. Based on the respective inter
Lat. Am. j. solids struct.. Publicado em: 29/11/2018
-
11. Assess of hollow clay block masonry wallets under high temperature
ABSTRACT The main goal of this study was the behavioral assessment at high temperatures of masonry wallets built with different geometries of hollow clay blocks. In total, four type of structural wallets were erected; blocks of 15 x 20 x 30 cm nominal dimensions (width x height x length) and compressive strength of 7, 10, 15 and 18 MPa were built, employing
Matéria (Rio J.). Publicado em: 18/10/2018
-
12. Characterization of Vitrocrystalline Foams Produced from Discarded Glasses and Recycled Polystyrene Spheres
In this work, discarded soda-lime glasses (from glass bottles) and recycled polystyrene (PS) spheres (d50 < 300 µm) were successfully converted into vitrocrystalline foams for thermal insulation applications. Physical and chemical properties of the selected and prepared raw materials (wastes) were characterized. Batches containing well mixed glass powder (d
Mat. Res.. Publicado em: 23/10/2017