Thermal Fatigue
Mostrando 1-12 de 34 artigos, teses e dissertações.
-
1. Avaliação de desvio dimensional em Inconel 718 após a retificação em diferentes técnicas de lubri-refrigeração
RESUMO O Inconel 718 é uma liga à base de níquel que possui elevada resistência à fadiga e à fluência, ductilidade, rigidez, inércia química e capacidade de operar em elevadas temperaturas, por isto é bastante utilizada na fabricação de peças aeronáuticas de alto rendimento. Estas peças exigem tolerâncias dimensionais e geométricas estreitas
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Thermoregulation in Hypertensive Rats during Exercise: Effects of Physical Training
Resumo Fundamento: Ratos espontaneamente hipertensos (SHR) apresentam déficits no balanço térmico durante o exercício físico. Objetivo: Avaliar os efeitos do treinamento físico de baixa intensidade sobre o balanço térmico de ratos hipertensos submetidos a um protocolo de exercício físico agudo. Métodos: Ratos machos Wistar e SHR, com 16 semanas
Arq. Bras. Cardiol.. Publicado em: 14/03/2019
-
3. Case study of muscle fatigue in parafunctional patient using occlusal device with fiber Bragg grating sensors
Abstract This case study describes a new method using a fiber optic Bragg grating sensor to determine muscle fatigue in a patient wearing a resilient occlusal device for the treatment of bruxism symptoms. Four tasks performed at maximum bite force induced rapid exhaustion for the analysis of fatigue. The results show that it is possible to obtain a better un
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-06
-
4. Rolling Contact Fatigue Life of Rail for Different Slip Conditions
Abstract A three-dimensional elastic-plastic finite element analysis (FEA) is carried out to estimate the rolling contact fatigue (RCF) crack initiation life for varied slip range on the rail arising from operational variations. The wheel load produces Hertzian contact pressure. Variation in engine traction induces slip variations that evolves thermal load i
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
5. Thermal load effects on fatigue life of a cracked railway wheel
AbstractIn this paper, fatigue life of a cracked railway wheel under thermo-mechanical loads is studied. For this purpose a FE model of a wheel, with two brake shoes and a portion of rail is created and suitable loads and boundary conditions are applied to the model. It is assumed that the wheel has contained an elliptical crack in the definite depth of the
Lat. Am. j. solids struct.. Publicado em: 2015-06
-
6. Elliptical and circular bonded composite repair under mechanical and thermal loading in aircraft structures
In this study, the three-dimensional finite element method is used to achieve a comparison between the semi circular and semi elliptical patch repairs in aircraft structures. The comparison was done by the analysis of : the mechanical and thermal stress intensity factors (SIF and TSIF) at the tip of repaired crack and the distribution of the adhesive stresse
Mat. Res.. Publicado em: 28/10/2014
-
7. XPS, XRD and laser raman analysis of surface modified of 6150 steel substrates for the deposition of thick and adherent diamond-like carbon coatings
Although the 6150 steel has an excellent fatigue and impact resistance, it is unsuitable to operate it when the corrosion is a limited factor. We propose here a sequence of steel pre-treatment by carburizing, carbonitriding and nitriding in order to improve the poor adhesion between Diamond Like-Carbon coatings on steel. This sequence is our attempt to reduc
Mat. Res.. Publicado em: 25/02/2013
-
8. Tensiones residuales en uniones soldadas por FSW en aluminio 7075-T651
Residual stresses could be a relevant issue in the structural integrity of a component in service and usually have a major influence on their fatigue life, among other failure mechanisms. In recent years Friction-Stir Welding (FSW) has revolutionized the welding technology. Its main application has been given in aluminum alloys, but nowadays can be applicabl
Soldag. insp.. Publicado em: 2012-12
-
9. Pó de borracha reutilizado na confecção de compostos de borracha natural para a produção de peças de engenharia do setor automotivo
Due to the cross-linked structure and the presence of antidegradants, rubber products decomposition is very hard and the disposal of waste material has been caused many environmental problems. Therefore, rubber recycling and the use of it as raw material in fresh rubber compounds are strongly necessary to achieve more sustainable technological projects. The
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
10. AvaliaÃÃo do desempenho de ligante asfÃltico modificado por poli (Ãcido fosfÃrico) (PPA) e efeitos da adiÃÃo do lÃquido da casca da castanha de caju (LCC). / Performance evaluation of asphalt binder modified poly (phosphoric acid) (PPA) and effects adding the liquid from the bark of cashew (LCC)
The AC with 50/70 penetration grade (Petrobras - LUBNOR), pure and modified by polyphosphoric acid (PPA), was analyzed by rheological tests (viscosity and DSR), thermal analysis (TGA and DSC), spectrometric (NMR and FTIR) and chromatographic (TLC-FID and GPC) methods. The interaction of AC with PPA was investigated from the reactions of its fractions (aromat
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/12/2011
-
11. Development and characterization of composite materials for production of composite risers by filament winding
Industry has been challenged to provide riser systems which are more cost effective and which can fill the technology gaps with respect to water depth, riser diameter and high temperatures left open by flexibles, steel catenary risers (SCRs) and hybrid risers. Composite materials present advantages over conventional steel risers because composite materials a
Materials Research. Publicado em: 26/08/2011
-
12. The effect of residence time on the tensile properties of superelastic and thermal activated Ni-Ti orthodontic wires
Since the 1980s, different devices based on superelastic alloys have been developed to fulfill orthodontic applications. Particularly in the last decades several researches have been carried out to evaluate the mechanical behavior of Ni-Ti alloys, including their tensile, torsion and fatigue properties. However, studies regarding the dependence of elastic pr
Materials Research. Publicado em: 05/08/2011