Thermal Displacements
Mostrando 1-12 de 28 artigos, teses e dissertações.
-
1. COMPARISON BETWEEN ABSOLUTE AND RELATIVE POSITIONAL ACCURACY ASSESSMENT - A CASE STUDY APPLIED TO DIGITAL ELEVATION MODELS
Resumo Este artigo apresenta um estudo comparativo entre os métodos absoluto e relativo para a avaliação de acurácia posicional altimétrica de Modelos Digitais de Elevação (MDE). Para o embasamento teórico desta pesquisa, foram apresentadas as definições de acurácia (exatidão) e precisão, bem como conceitos relativos à acurácia posicional abso
Bol. Ciênc. Geod.. Publicado em: 18/04/2019
-
2. Mechanical characterization of PM aluminum composites by small punch test
ABSTRACT In this work Small Punch Test (SPT) was applied to study the mechanical behavior of ultrafine-grained Al-Al2O3metal matrix composites (MMCs) fabricated in situ via powder metallurgy route (HITEMAL®). Such MMCs show attractive mechanical properties, enhanced creep performance and increased thermal stability at elevated temperatures, not normally ass
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. The Back Stress Behavior Study Analyzed in Residual Stress of Welded Naval Plates in Different Lamination Directions and Different Thermal Contributions
The lamination process adds the anisotropy characteristic in the final product. This anisotropy influences the yield strength according to the direction in question, the difference between the value of the yield tension in one direction and the value of the yield tension in another direction referred to as the back stress. Naval plates were welded by the GMA
Mat. Res.. Publicado em: 18/12/2017
-
4. A Simple FEM Formulation Applied to Nonlinear Problems of Impact with Thermomechanical Coupling
Abstract The thermal effects of problems involving deformable structures are essential to describe the behavior of materials in feasible terms. Verifying the transformation of mechanical energy into heat it is possible to predict the modifications of mechanical properties of materials due to its temperature changes. The current paper presents the numerical d
Lat. Am. j. solids struct.. Publicado em: 2017
-
5. Thermo-Elastic Analysis of Clamped-Clamped Thick FGM Cylinders by Using Third-Order Shear Deformation Theory
Abstract Using the third-order shear deformation theory (TSDT), an analytical solution for deformations and stresses of axisymmetric clamped-clamped thick cylindrical shells made of functionally graded material (FGM) subjected to internal pressure and thermal loading are presented. The material properties are graded along the radial direction according to po
Lat. Am. j. solids struct.. Publicado em: 2016-04
-
6. PF/CLAY hybrid materials: a simple method to modulate the optical properties
Abstract The aim of this work was modulate the emission properties and improve thermal stability of a conjugated polymer incorporated into an inorganic matrix. Hybrid material was prepared based on poly(9,9-dioctylfluorene-co-phenylene (PF) and montmorillonite (Na+Mt) clay using wet impregnation of 10, 30 and 50 wt.% of PF into Na+Mt and Na+Mt intercalated w
Polímeros. Publicado em: 15/03/2016
-
7. Hygrothermoelastic Analysis of Orthotropic Cylindrical Shells
Abstract In this work, the combined effect of moisture and temperature on the bending behavior of simply supported orthotropic cylindrical shells has been investigated. Initially three dimensional equilibrium equations of thermoelasticity, simplified to the case of generalized plane strain deformations in the axial direction are solved analytically for an or
Lat. Am. j. solids struct.. Publicado em: 2016-03
-
8. Generalized Magneto-thermo-microstretch Response of a Half-space with Temperature-dependent Properties During Thermal Shock
Abstract The generalized magneto-thermoelastic problem of an infinite homogeneous isotropic microstretch half-space with temperature-dependent material properties placed in a transverse magnetic field is investigated in the context of different generalized thermoelastic theories. The upper surface of the half-space is subjected to a zonal time-dependent heat
Lat. Am. j. solids struct.. Publicado em: 2015
-
9. Thermal flexural analysis of cross-ply laminated plates using trigonometric shear deformation theory
Thermal stresses and displacements for orthotropic, two-layer antisymmetric, and three-layer symmetric square cross-ply laminated plates subjected to nonlinear thermal load through the thickness of laminated plates are presented by using trigonometric shear deformation theory. The in-plane displacement field uses sinusoidal function in terms of thickness co-
Lat. Am. j. solids struct.. Publicado em: 2013-09
-
10. Estudo de distorções em soldagem com uso de técnicas numéricas e de otimização / Study of distortion in welding by using numerical and optimization techniques
The occurrence of distortions of structures is common during welding. Such distortions are more severe in the case of large structures, such as shipbuilding. Since distortions can increase manufacturing costs and time during shipbuilding, a thorough study of causes and consequences of distortions is necessary. Therefore, this work aims to study the distortio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/06/2012
-
11. Roof modular system in wood and particle board (OSB) to rural construction
Wood is a material of great applicability in construction, with advantageous properties to form various structural systems, such as walls and roof. Most of the roof structural systems follow models that have remained unchanged for a long time. A roof modular system in distinguished materials is proposed: reforested wood (Pine), oriented strand board (OSB) an
Scientia Agricola. Publicado em: 2012-06
-
12. Análise dos deslocamentos térmicos de eixo-árvores de máquinas-ferramenta em altas rotações / ANALYSIS OF MECHANICAL AND THERMAL DISPLACEMENTS IN HIGH SPEED MACHINE TOOL SPINDLES
Machine tools play a key role in modern industrial production; therefore the technological development of machine tool industry has grown over the past decades. High Speed Machining (HSM) is widely used for machining complex and free form surfaces with high geometrical and dimensional accuracy. The spindle is one of the main items of a machine tool. Thus, it
Publicado em: 2011