Determining Mercury in Sediment Samples by Extraction Using a Novel-Chelating Reagent Dithiothreitol (DTT) Followed by Cold Vapor Atomic Fluorescence Spectrometry (CV-AFS)

A new analytical protocol has been developed for the determination of mercury in surface sediments using dithiothreitol (DTT) as a new chelating reagent for the extraction. This protocol requires a small sample mass (250 mg), 4.0 mL of a 0.1 M (pH = 9.0) aqueous DTT solution, and sonication for 30 min, followed by cold vapor atomic fluorescence spectrometry (CV-AFS). The limits of detection and quantification determined were 6 and 18 ng g−1, respectively. The method was validated using three standard reference materials, SRM NIST 1646a, PACS-2, and MESS-3, with recoveries in the range of 102...