Crack Propagation Analysis of Magnesium Rod Processed by Extrusion-shear: Numerical Modeling and Experimental Verification

During extrusion-shear (ES) process, the surface cracks would be formed in the processed rod for AZ31 magnesium caused by nonhomogeneous metal flow and stress. To reduce the cracks defects, three-dimensional (3D) finite element method (FEM) of ES on a wrought AZ31 magnesium alloy have been performed. ES process experiments have been also conducted to verify the simulation results under the identical conditions. It can be found that the tendency to generate the dead zone is decreased by employing the ES die with the extrusion ratio of 28 comparing to the one with the extrusion ratio of 11.6. Wi...