Teos
Mostrando 1-12 de 118 artigos, teses e dissertações.
-
1. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
2. Synthesis of ordered mesoporous silica MCM-41 with controlled morphology for potential application in controlled drug delivery systems
Resumo O MCM-41 é uma das cerâmicas mesoporosas mais estudadas para sistemas de liberação controlada de fármacos. Sua elevada área superficial específica e mesoporosidade permitem alta capacidade de adsorção. Apesar dos inúmeros trabalhos publicados na área biomédica, até o presente momento não há relatos de aplicações comerciais do MCM-41.
Cerâmica. Publicado em: 06/06/2019
-
3. Esterificação do ácido oleico utilizando aluminossilicato mesoporoso modificado com óxido de zircônio
RESUMO Os desafios decorrentes do aumento populacional, do uso extensivo e degradação dos recursos naturais e da dependência dos recursos fósseis, tem despertado o interesse pelo desenvolvimento de tecnologias para a produção de combustíveis renováveis. Dentro deste contexto tecnologias para a produção de biodiesel tem sido bastante estudadas de fo
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Obtainment and Characterization of a Silicon alkoxides-based Coating Applied to a Substrate of Stainless Steel 316L for Use in Biomaterials
The silicon alkoxides-based coating is an alternative to control the release of cytotoxic ions through metal implants. This study evaluated the influence of the number of layers of a hybrid coating on the surface of austenitic stainless steel AISI 316L on the corrosion resistance. This coating was produced from the precursors of silicon alkoxides 3-(trimetho
Mat. Res.. Publicado em: 11/03/2019
-
5. Monitoramento da hidrólise/condensação do tetraetoxisilano em solução com baixo teor alcoólico por análises de espectroscopia de infravermelho
RESUMO O objetivo desse trabalho foi monitorar a hidrólise/condensação do tetraetoxissilano (TEOS) em função do tempo de diluição do silano, por meio da análise de espectroscopia de infravermelho (IR). Inicialmente foram avaliadas duas concentrações de silano (1 e 10% em volume). No entanto, verificou-se que em concentrações de 1% de TEOS não fo
Matéria (Rio J.). Publicado em: 06/12/2018
-
6. Synthesis of Modified Silica Aerogel Nanoparticles for Remediation of Vietnamese Crude Oil Spilled on Water
New application of modified silica aerogel nanoparticles was carried out for adsorption of Vietnamese spilled crude oil obtained from Bach-Ho field. The aerogel was synthesized by atmospheric drying method without critical extraction procedure in liquefied CO2 followed by surface modification using polydimethylsiloxane precursor in n-hexane solvent. The synt
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
7. Electrode Material Containing Graphite Incorporated to an Amino-Functionalized Polydimethylsiloxane Network for the Detection of Copper
Graphite was incorporated to a polydimethylsiloxane (PDMS) polymer network functionalized with amino groups to obtain an electrode material and used to detect copper ions in aqueous solutions and sugarcane spirit. The polymer network was prepared with PDMS, 3-aminopropyl-trimethoxysilane (APTMS), tetraethyl orthosilicate (TEOS) with addition of graphite to o
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
8. Síntesis de sílice mesoestructurada: determinación de las condiciones óptimas de extracción del templato
ABSTRACT Ordered mesoporous silica was synthesized by the sol-gel process using tetraethoxysilane (TEOS) as silica source and hexadecyltrimethyl ammonium bromide (CTAB) as structure directing agent. Post-synthesis surfactant removal was conducted by two techniques: calcination, with progressive increases in temperature up to 550 ºC and solvent extraction us
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Effect of concentrations of plasticizers on the sol-gel properties developed from alkoxides precursors
Abstract Coatings developed through sol-gel method is presented as an interesting replacement to chromium coating. Sol-gel method present advantages as high purity and excellent distribution of the components. The objective of this work is to synthesize and characterize a film obtained by sol-gel route. The film was prepared with 3-(trimethoxysilylpropyl) me
Polímeros. Publicado em: 2017-12
-
10. Corrosion Mechanism Suggested Based on Electrochemical Analysis and SVET for Uncoated Tinplate and Post Coated With a Hybrid Film
The tinplate, used in the packaging sector and formed from a metal substrate, comprises a steel base which has undergone a surface treatment to produce a thin layer of FeSn2, a tin layer and an oxide tin layer. Currently, packaging using surface treatment is based on the use of chromates because these metals provide an excellent corrosion resistance. Nontoxi
Mat. Res.. Publicado em: 09/10/2017
-
11. Ordered Silica Particles Made by Nonionic Surfactant for VOCs Sorption
Adsorption of light organic compounds such acetone, 1-propanol and carbon dioxide was tested by using mesoporous silica materials made from non ionic surfactant with long chain and silica sources as tetraethylorthosilicate TEOS and modified Na-X and Li-A Zeolites. X-ray powder diffraction (XRD), nitrogen adsorption-desorption analysis and scanning electron m
Mat. Res.. Publicado em: 26/06/2017
-
12. The Effect of TiO2-SiO2 Nanocomposite on the Performance Characteristics of Leather
In this study the effect of TiO2-SiO2 nanocomposite on various performance characteristics of finished leather was investigated. For this purpose, TiO2-SiO2 nanocomposite was prepared via the sol-gel method from tetraethoxysilane (TEOS) and titanium n-butoxide (TBO) catalyzed with acid at ambient temperature. The prepared composite was applied by spraying on
Mat. Res.. Publicado em: 22/06/2017