Tempered
Mostrando 1-12 de 99 artigos, teses e dissertações.
-
1. Influencia de las expectativas de familias y profesorado en el logro educativo y social de los estudiantes
Abstract Since the fifties of the twentieth century, there has been a debate about whether the concept that teachers construct of their students is related to the social extraction of the latter as well as their degree of educational success. In that case, and there are numerous researchers that point in this direction, the genius of those students from lowe
Educ. Pesqui.. Publicado em: 25/11/2019
-
2. Effect of the Chemical Homogeneity of a Quenched and Tempered C-Mn Steel Pipe on the Mechanical Properties and Phase Transformations
Seamless steel pipes for application in the oil and gas industries are manufactured from quenched and tempered steel. Aiming to meet the required characteristics, it is necessary that the microstructure and the mechanical properties are homogeneous along the wall thickness of the pipes, which is even more critical for thick wall pipes. Considering the seamle
Mat. Res.. Publicado em: 03/06/2019
-
3. Dependence of Wear and Mechanical Behavior of Nitrocarburized/CrN/DLC Layer on Film Thickness
Diamond-like carbon (DLC) films are amorphous metastable carbon form that provide interesting mechanical and tribological properties. The role of film thickness influence upon wear and mechanical properties is of interest and not yet fully reported. In this study, two samples of previously plasma nitrocarburized, quenched and tempered H13 steel were duplex t
Mat. Res.. Publicado em: 31/01/2019
-
4. Influence of Cryogenic Treatment on the Tribological Behaviour of AISI H21 Tool Steel
The aim of the present work was to find out the optimum cryosoaking duration of deep cryogenic treatment to reduce the wear rate. The AISI H21 hot work tool steel specimens were hardened at 1195 ºC, cryotreated at -185 ºC for 6 to 30 h, double tempered at 540 ºC and soft tempered at 100 ºC. The hardness, impact toughness, wear rate and microstructural ch
Mat. Res.. Publicado em: 29/10/2018
-
5. Biology, distribution and geographic variation of loliginid squids (Mollusca: Cephalopoda) off southwestern Atlantic
ABSTRACT The biology and ecology of southwestern Atlantic loliginid squids have been intensively researched in the last few decades, mostly off the Brazilian southern coast. However, information gathered by scientific research cruisers, either past or recent, is limited. Three species of loliginid squids - the warm-tempered Doryteuthis sanpaulensis (Brakonie
Zoologia (Curitiba). Publicado em: 18/10/2018
-
6. Surface Integrity Analisys in the Hard Turning of Cemented Steel AISI 4317
This work was based on the surface integrity analysis of hardened steel, AISI 4317 case carburized, quenched and tempered with 58 HRC, obtained by a turning operation executed with CBN (cubic boron nitride) tool, varying three basic cutting parameters (cutting speed, feed rate and cutting depth). The surface integrity characterization was conducted analyzing
Mat. Res.. Publicado em: 26/07/2018
-
7. Characterization of Phase Transformations and Microstructural Changes in an API 5CT L80 Steel Grade During Ni Alloy Laser Cladding
The superficial coatings in micro-alloyed steel pipes has been a pointed way to decrease the corrosion problems in oil and gas industry. However, little emphasis has been given to the substrate. The effects of the deposition method on the steel microstructure and properties are still not well described. In this context, this work studied the effect of Ni sup
Mat. Res.. Publicado em: 26/07/2018
-
8. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Estudio del comportamiento en enfriamiento continuo del acero martensítico ferrítico de activación reducida F82H
ABSTRACT 9% Cr martensitic-ferritic steels are currently the privileged candidates to manufacture structural components of the so-called Generation IV nuclear fission reactors, because they exhibit very good thermophysical and mechanical properties under neutron irradiation. Along with them, the so-called Reduced Activation Ferritic-Martensitic steels (RAFM�
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Estudio de la evolución microestructural durante el austenizado de un acero ASTMA335 P91
ABSTRACT Quenched and tempered 9%Cr grade 91 steels (9Cr1MoNbVN) display a lath martensitic matrix with M23C6 (M = Cr, Fe) carbides and fine precipitates named MX (M = Nb, V; X = C, N). MX particles provide the key to control the size and size distribution of austenite grains, which is significantly important in designing materials with specific mechanical p
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Influencia del tiempo de revenido a 780°C sobre la resistencia al creep del acero ASTM A335 P91
ABSTRACT It has been investigated the effect of tempering time at 780°C on the creep strength of ASTM A335 grade P91 steel. The tempering temperature corresponded to the industrial tempering temperature and the times evaluated were chosen in such a way to accumulate, between the tempering prior as received (40 min) and the treatment carried out in the labor
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Desdoblamiento de la transformación martensítica en un acero F82H de activación neutrónica reducida
ABSTRACT One of the most promising solutions to global energy supply is nuclear fusion. This process, which is implemented in nuclear fusion reactors (from which one of the first designs was the Tokamak), involves deuterium-tritium plasmas at very high temperature, confined in vacuum chambers of toroidal shape under the influence of strong magnetic fields. T
Matéria (Rio J.). Publicado em: 19/07/2018