Temperature Coeficient
Mostrando 1-7 de 7 artigos, teses e dissertações.
-
1. Obtenção de austenita expandida (fase S): Nitretação por plasma em baixa temperatura x SHTPN – Parte 3
RESUMO Corpos de prova de aço inoxidável austenítico ISO 5832-1(similar ao AISI 316L, para aplicações biomédicas) apresentando camada superficial enrriquecida em nitrogênio (fase S), obtidos pelos processos de nitretação por plasma em baixa temperatura e SHTPN (Solution Heat Treatment after Plasma Nitriding -Tratamento de solubilização após nitre
Matéria (Rio J.). Publicado em: 20/05/2019
-
2. Estudo da estabilidade tÃrmica e estrutural de matrizes de Ca(Nb1/2Y1/2)xTi1-xO3 Y= Bi,Fe e Ca(Nb2/3Li1/3)xTi1-xO3-delta e seu uso em antenas dielÃtricas ressoadoras (DRAs) em Micro-ondas / Thermal Stability Analysis of Ca(Nb1/2Y1/2)xTi1-xO3 Y= Bi, Fe e Ca(Nb2/3Li1/3)xTi1-xO3-delta matrix and their use in microwave dielectric resonator antennas.
O crescimento das indÃstrias de telecomunicaÃÃes criou uma demanda por materiais cerÃmicos para aplicaÃÃes em micro-ondas. Estes materiais devem ter alta permissividade dielÃtrica (er), elevado fator de qualidade (Q) e coeciente de temperatura (tau_f ) menor ou igual a 10 ppm/ÂC, alÃm de baixo custo. O Titanato de CÃlcio (CaTiO3-CTO) possui alta pe
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/02/2012
-
3. Influência de parâmetros microestruturais no comportamento tribológico de ligas ferrosas multicomponentes / Influence of microstructural parameters on the tribological behavior of multicomponent ferrous alloys
The aim of this work is to evaluate the effect of microstructural parameters (eutectic carbides and matrix hardness) of multi-component ferrous alloys on tribological behavior in sliding wear and micro-abrasive wear. The samples were two series of alloys with variable vanadium (V serie) and molybdenum (M serie) contents and fixed amounts of other elements. E
Publicado em: 2007
-
4. Determination of the oxygen and nitrogen interstitial diffusion coeficient in niobium by mechanical spectroscopy
Mechanical spectroscopy measurements have been extensively used in the last decades to obtain information about many aspects of the behavior of solutes in metallic materials. Metals of body-centered cubic lattice that contain heavy interstitial elements (oxygen, nitrogen and carbon) in solid solution, present anelastic relaxation peaks when submitted to cycl
Materials Research. Publicado em: 2006-12
-
5. Atomistic simulation for difusion mechanisms investigation : self diffusion coeficient of simples gases in polymeric matrix / Simulação atomistica como ferramenta para investigação dos mecanismos de difusão : coeficientes de autodifusão de gases simples em matriz polimerica
In this thesis a study of the predictive potential of the molecular dynamic simulation was performed for transport properties of light gases in polyimide matrix. From de practical point of view permeability is the property of most interest, and involves kinetics as well as thermodynamics properties, diffusion coefficient and solubility of the penetrants mole
Publicado em: 2006
-
6. Uso de um sistema indicador biologico na avaliação do valor de esterilização aplicado a pure de cenoura processado em retorta rotativa
Aimmning to employ the biological indicator technique to monitor sterilization process delivered to canned food processed in agitating retort, this work was carried out in three phases: 1- preparation and calibration of sterilization biological indicator units (BIUs) for thermo-processed canned food; 2- design of preservation process for diluted (50% pH 5.3)
Publicado em: 1995
-
7. Problemas causados pelo aquecimento em rodas ferroviarias : o ensaio Kraus
This work is a summary of the most important problems caused by heating in railway wheels. It shows how heat is generated during braking, how many heat goes into the wheel, the temperature distribuition, thermal stresses and its influence in the material fatigue. It puts foward the problem related to structural changes caused by heating and mentions its most
Publicado em: 1992