Technological Characterization
Mostrando 25-36 de 216 artigos, teses e dissertações.
-
25. Characterization of clays from the State of Paraíba, Brazil for aesthetic and medicinal use
Resumo Este trabalho teve como objetivo avaliar a potencialidade das argilas do estado da Paraíba, visando suas aplicações em tratamentos medicinais, terapêuticos e estéticos. As amostras das argilas foram caracterizadas pelas técnicas de difração de raios X, composição química por fluorescência de raios X, termogravimetria, análise térmica dif
Cerâmica. Publicado em: 2019-01
-
26. Hair straighteners: an approach based on science and consumer profile
Technological progress has allowed women to change their natural hair configuration according to their will. This type of treatment is very popular around the world, even involving the use of prohibited chemicals, such as formaldehyde. Studies of hair characterization, straighteners and toxic evaluation are available in the literature, although few studies
Braz. J. Pharm. Sci.. Publicado em: 29/11/2018
-
27. Comportamiento al creep de un polímero utilizado para impresión 3D
ABSTRACT In recent years, additive construction or 3D printing technology is being widely used for manufacturing goods. This construction procedure has and will have a great industrial impact. There are several 3D printing processes, and among of them the most known is called Fused Deposition Modeling (FDM). The objective of the present paper is oriented to
Matéria (Rio J.). Publicado em: 19/07/2018
-
28. Comprobación de la uniformidad de resultados de un equipo de ensayos simultáneos de termofluencia
ABSTRACT The phenomenon of creep occurs in materials that operate under high temperatures and mechanical stresses, causing changes in their structures; such changes are evidenced by a progressive loss of mechanical strength. The characterization of this phenomenon should be performed with appropriate test machines, which are usually dependent on expensive te
Matéria (Rio J.). Publicado em: 19/07/2018
-
29. Caracterización de resinas epoxi para uso en conectores de ductos flexibles
ABSTRACT In the offshore productions of gas and oil are frequently used flexible pipes. The end fitting is the connection between the flexible pipe body and the production unit, at the assembly of this component is used epoxy resin to fill the free space inside it. This polymeric material holds the tensile armor wires to form the anchoring system. A critical
Matéria (Rio J.). Publicado em: 19/07/2018
-
30. Technological Feasibility of Hovenia dulcis thunb. Species for the Production of Edge Glued Panels
ABSTRACT This study aims to evaluate the use of Hovenia dulcis wood to produce Edge Glued Panels – EGP. To this end, joints with dimensions of 5.0 × 31.0 × 2.5 cm (Width × Length × Thickness) were put together using polyvinyl acetate (PVAc) and emulsion polymer isocyanate (EPI) adhesives at a spread rate of 200 g.m-2 and the chemical characterization
Floresta Ambient.. Publicado em: 05/04/2018
-
31. Annealing Effects on the Structural and Optical Properties of ZnO Nanostructures
ZnO nanostructures were synthesized by a proteic sol-gel method, using zinc nitrate hexahydrate and gelatin as precursors. Size and shape evolution of ZnO nanostructures were achieved by annealing temperature in the range 250-1000 ºC. The crystalline structure, morphology and optical properties of the ZnO nanoparticles were characterized by X-Ray Diffractio
Mat. Res.. Publicado em: 05/03/2018
-
32. Effect of Specimens' Shape and Size on the Determination of Compressive Strength and Deformability of Cement-lime Mortars
This work presents comparative analyses of the effect of specimens' shape and size on the compressive strength and modulus of elasticity of mortars. Mortar mixtures with compressive strength between 5 and 20 MPa were produced. Experimental tests determined the compressive strength of cylinder specimens of (5 x 10) cm and (10 x 20) cm, and also cubic specimen
Mat. Res.. Publicado em: 22/01/2018
-
33. A PROPOSAL FOR A TYPOLOGY OF SHARING ECONOMY
ABSTRACT Purpose: to propose a typology for sharing economy that allows the characterization and classification of its main forms of manifestation. Originality/value: the theme that involves collaborative consumption and sharing economy has wide definitions with no clear establishment of boundaries between them. Part of that definition gap may occur becaus
RAM, Rev. Adm. Mackenzie. Publicado em: 2017-10
-
34. Use of Brazilian Kaolin as a Potential Low-cost Adsorbent for the Removal of Malachite Green from Colored Effluents
This study investigated the potential of Brazilian kaolin as a low-cost adsorbent for the removal of Malachite Green (MG) from colored effluents. The morphology, chemical structure and surface properties of the adsorbent were investigated by characterization techniques such as X-ray diffraction, N2 adsorption-desorption isotherms, Fourier transform infrared
Mat. Res.. Publicado em: 11/05/2017
-
35. La dimensión argumentativa y tecnológica en la formación de docentes de ciencias
Abstract: We discuss in this paper the notions of argumentation held by science teachers and high school students. The analysis is taken to a deeper level through the characterization of three technological resources that are employed in the context of initial and continuous training of science teachers. The resources studied are: discussion forums, maps of
Ciênc. educ. (Bauru). Publicado em: 2016-12
-
36. Investigating the Provenance of Iron Artifacts of the Royal Iron Factory of São João de Ipanema by Hierarchical Cluster Analysis of EDS Microanalyses of Slag Inclusions
Microstructural characterization techniques, including EDX (Energy Dispersive X-ray Analysis) microanalyses, were used to investigate the slag inclusions in the microstructure of ferrous artifacts of the Royal Iron Factory of São João de Ipanema (first steel plant of Brazil, XIX century), the D. Pedro II Bridge (located in Bahia, assembled in XIX century a
Mat. Res.. Publicado em: 24/11/2016