Synthetic Polymers
Mostrando 1-12 de 152 artigos, teses e dissertações.
-
1. POLÍMERO DE IMPRESSÃO MOLECULAR PARA O TIACLOPRIDO: UMA INVESTIGAÇÃO TEÓRICA
Thiacloprid (TCP) is a synthetic insecticide, belonging to the class of neonicotinoids (NNCs), which present potential damages to the environment, biodiversity and human health, being necessary its constant monitoring. In this sense, molecularly imprinted polymers (MIPs) have been shown as an excellent alternative for the separation science, since they can r
Quím. Nova. Publicado em: 2020-12
-
2. REUSE OF COLLAGEN AND HYDROXYAPATITE FROM THE WASTE PROCESSING OF FISH TO PRODUCE POLYETHYLENE COMPOSITES
In recent years, the increase in the generation of waste (e.g., bones and skin) from the processing of fish-based food related to the increase in fish consumption and the accumulation of synthetic polymers in the environment are causing major environmental concerns. Hydroxyapatite (HA) extracted from the bones and collagen from the skin of fish processing re
Quím. Nova. Publicado em: 2020-02
-
3. Avaliação do efeito do tratamento a plasma sobre a superfície de filmes de polietileno verde e argila vermiculita
RESUMO O Polietileno (PE) Verde é um polímero sintético que apresenta baixa energia superficial, que resulta em fraca propriedade de adesão. Esta baixa adesão, provoca alguns problemas relativos às aplicações práticas dos polímeros, como fraca aderência de tintas de impressão, revestimentos, adesivos e metais à superfície do polímero, entre ou
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Application of Glycerol in the Synthesis of Hyperbranched and Highly Branched Polyethers: Characterization, Morphology and Mechanism Proposal
Hyperbranched biopolymers is an important class of polymer that is used in different areas, mainly in biomedicine. AB2 monomers are crucial to the development of a "hyperbranched" architecture of polyglycerol, being glycidol the most commonly used, even considering its environmental hazard. Glycerol carbonate is an ecologically accepted monomer synthesized d
Mat. Res.. Publicado em: 24/10/2019
-
5. Microbial Synthesis and Characterization of Biodegradable Polyester Copolymers from Burkholderia Cepacia and Cupriavidus Necator Strains Using Crude Glycerol as Substrate
Abstract Polymers are materials of pronounced importance in the modern world, since they are massively present in everyday life, especially in the form of packaging. However, most of these materials are derived from non-renewable sources and their disposal generates large volumes of waste, which is extremely damaging to natural environments. In this context,
Braz. arch. biol. technol.. Publicado em: 24/10/2019
-
6. Effects of Gamma Radiation on the Properties of the Thermoplastic Starch/Poly (Butylene Adipate-co-Terephthalate) Blends
The development of blends made from matrices of synthetic biodegradable polymers, and natural additives, are considered less environmentally aggressive materials. This work aimed to study the effects of gamma radiation on the properties of the thermoplastic starch (TPS)/poly(butylene adipate-co-terephthalate) (PBAT). In this work, blends of TPS/PBAT were pre
Mat. Res.. Publicado em: 14/10/2019
-
7. Stabilization effect of kraft lignin into PBAT:Thermal analyses approach
ABSTRACT Sterically hindered phenols are an important class of synthetic antioxidants for polymers, commonly incorporated to inhibit polyolefins or polyesters oxidation. However, synthetic antioxidants use is under restricted regulation due to their potential health risk and environmental impacts. Thus, great interest has been attracted to the phenol-based n
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Avaliação do efeito do agente compatibilizante (PP-g-MA) em misturas PP/Amido termoplástico
RESUMO O crescente desperdício de materiais plásticos no meio ambiente juntamente com a preocupação com a futura escassez do petróleo tem aumentado o interesse por polímeros biodegradáveis, como o amido. Nos últimos anos, o amido tem sido utilizado em misturas com diferentes polímeros sintéticos. Essas misturas têm sido compatibilizadas por meio d
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. ASSESSMENT OF POLYHYDROXYALKANOATE SYNTHESIS IN SUBMERGED CULTIVATION OF Cupriavidus necator AND Burkholderia cepacia STRAINS USING SOYBEAN AS SUBSTRATE
ABSTRACT Polyhydroxyalkanoates (PHA) are biocompatible and biodegradable polyesters produced by prokaryotic microbes for energy storage and carbon reserve. These polymers are an option to diminish the massive impact caused by inadequate disposal of synthetic plastics. In this study, evaluation and characterization of PHA produced by Cupriavidus necator (IPT
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
10. Thermomechanical Properties of Corn Starch Based Film Reinforced with Coffee Ground Waste as Renewable Resource
Abstract Starches polymeric films offer several advantages for the replacement of synthetic polymers due to their biodegradability, non-toxicity, availability and low cost. However, the high biodegradation potential can cause fragility, considering some fundamental mechanical properties. Therefore, starch based polymeric films were reinforced incorporating l
Mat. Res.. Publicado em: 07/01/2019
-
11. Anticorrosive Effect of PVP 40000 Against AISI 1020 Carbon Steel in HCl
Polymers have received considerable attention for replacing synthetic inorganic and organic anti-corrosion inhibitors since they are not as toxic for the environment, besides being cheaper. Polyvinylpyrrolidone (PVP) has been studied due to its applicability, solubility, very low toxicity, cost and efficiency in corrosion inhibition against metals, such as z
Mat. Res.. Publicado em: 29/10/2018
-
12. Structural Invariance of a ZnII Coordination Polymer with 5-Aminoisophthalic Acid under Different Synthetic Conditions
A same coordination polymer [Zn(aip)(DMSO)] (aip: 5-aminoisophthalate and DMSO: dimethylsulfoxide) was synthesized using the same reactants (ZnSO4, aip and H2O/DMSO) but in different conditions, in which the stoichiometry (1:1-4:1 metal:ligand ratio), temperature (70 and 100 °C) and synthetic method (liquid-liquid diffusion, solvothermal and conventional wi
J. Braz. Chem. Soc.. Publicado em: 2017-11