Symmetric Element
Mostrando 1-12 de 55 artigos, teses e dissertações.
-
1. Flexure Based Energy Dissipating Device in Self-Centering Braces
Abstract Self-centering braces, in the current stage of development can accommodate large deformation and force levels. However, there is still a need for improvement of the energy dissipation mechanisms commonly incorporated in these braces. Yield based energy dissipation systems can overcome some of the problems faced with friction-based devices, such as s
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
2. On-load Back-EMF Optimization Based on the Back-EMF MST Method and Parametric Optimization
Abstract This paper proposes an optimal design for a surface mounted permanent magnet synchronous machine (SM-PMSM) based on parametric optimization process to reduce the on-load Back-EMF distortions caused by an increase in the electromagnetic load and in the saturation. Unlike conventional methods described in the literature, the optimization approach prop
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
3. Numerical analysis of reinforced concrete asymmetric cross-section beams under oblique bending
Abstract The problem of symmetric cross-section beams under oblique bending is well known to professional designers and academy. In fact, symmetric elements make up most of the cross-sections defined in design. The case of the asymmetric cross-sections is, however, little discussed in literature, but is a particular problem, especially in bridge girder desig
REM, Int. Eng. J.. Publicado em: 2019-06
-
4. Quasi-Static Crushing and Energy Absorption Characteristics of Thin-Walled Cylinders with Geometric Discontinuities of Various Aspect Ratios
Abstract In this paper, energy absorption and deformation capacity of circular thin-walled members with elliptical cut-outs are investigated both numerically and experimentally. Thin-walled members possess the uniform height, thickness, average cross sectional area, material and volume are subjected to axial quasi-static loading. To conduct such tests, speci
Lat. Am. j. solids struct.. Publicado em: 2017-09
-
5. Numerical Study on the Structural Performance of Steel Beams with Slant End-plate Connections
Abstract Thermal effects can be one of the most harmful conditions that any steel structure should expect throughout its service life. To counteract this effect, a new beam, with a capability to dissipate thermally induced axial force by slanting of end-plate connection at both ends, is proposed. The beam was examined in terms of its elastic mechanical behav
Lat. Am. j. solids struct.. Publicado em: 2016-07
-
6. Chromatic Dispersion of an Optical Fiber Based on Photonic Quasicrystals with Twelve-Fold Symmetry and its Application as Directional Coupling
Abstract Optical fibers composed by photonic quasicrystals it is based on aperiodic structures characterized by at least two different symmetrical patterns from the base matrix. In this work, an optical fiber composed by quasi-periodic and symmetric matrix was analyzed using the finite element method in conjunction with cylindrical perfectly matched layers.
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2015-12
-
7. An efficient analytical model to evaluate the first two local buckling modes of finite cracked plate under tension
Abstract The analytical approach is presented for both symmetric and anti-symmetric local buckling of the thin-plate in finite sizes and with a center crack under tension. An efficient classical solution based on the principle of minimum total potential energy was provided using only 2 and 1 degrees of freedom for symmetric and anti-symmetric modes and the l
Lat. Am. j. solids struct.. Publicado em: 2015-11
-
8. A Modified Computational Scheme for the Stochastic Perturbation Finite Element Method
Abstract A modified computational scheme of the stochastic perturbation finite element method (SPFEM) is developed for structures with low-level uncertainties. The proposed scheme can provide second-order estimates of the mean and variance without differentiating the system matrices with respect to the random variables. When the proposed scheme is used, it i
Lat. Am. j. solids struct.. Publicado em: 2015
-
9. An ant colony algorithm applied to lay-up optimization of laminated composite plates
Ant colony optimization (ACO) is a class of heuristic algorithms proposed to solve optimization problems. The idea was inspired by the behavior of real ants, related to their ability to find the shortest path between the nest and the food source. ACO has been applied successfully to different kinds of problems. So, this manuscript describes the development a
Lat. Am. j. solids struct.. Publicado em: 2013-05
-
10. Propriedades de Lie de elementos simétricos sob involuções orientadas em álgebras de grupo / Lie properties of symmetric elements under oriented involutions in group algebras
Sejam $F$ um corpo de característica diferente de $2$ e $G$ um grupo. A partir da involução clássica, que envia cada elemento em seu inverso, e uma orientação do grupo $G$ é possível definir uma involução clássica orientada na álgebra de grupo $FG$. O objetivo desta tese é estudar propriedades de Lie do conjunto dos elementos simétricos $(FG)^+
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/11/2012
-
11. Análise de cascas abatidas de materiais compósitos laminados simétricos usando o método dos elementos de contorno / Analysis of shallow shells of symmetric composite laminated materials using the boundary element method
Este trabalho apresenta uma formulação do método dos elementos de contorno para o cálculo de deslocamentos em cascas abatidas de materiais compósitos laminados simétricos. A formulação desenvolvida baseia-se no acoplamento da formulação de elasticidade plana (formulação de membrana) e da formulação de placas finas (placas de Kirchhoff ou teoria
Publicado em: 2011
-
12. An efficient two-level preconditioner based on lifting for FEM-BEM equations
The system resulting from the coupled Finite Element Method and Boundary Element Method formulations inherits all characteristics of both finite element and boundary element equation system, i. e., the system is partially sparse and symmetric and partially full and nonsymmetric. Consequently, to solve the resulting coupled equation system is not a trivial ta
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2010-12