Surface Treatment And Aluminum
Mostrando 1-12 de 59 artigos, teses e dissertações.
-
1. Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment
Abstract In order to reduce the impacts of the industrial effluent on the environment, silicon carbide hollow fiber membranes were prepared by the precipitation-immersion technique and sintered at 1450 and 1500 °C. The membranes were characterized by X-ray diffraction, their surface structure was characterized by scanning electron microscopy and atomic forc
Cerâmica. Publicado em: 2021-06
-
2. Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments
Abstract: The effects of several ceramic surface treatments on bond strength of a polymer-infiltrated ceramic network and resin composite as repair material were evaluated. CAD-CAM blocks of a polymer-infiltrated ceramic network (Vita Enamic) were sliced and subjected to aging process, followed by embedding in acrylic resin. The bonding/repair area was treat
Braz. oral res.. Publicado em: 05/04/2018
-
3. In vitro effects of alcohol-containing mouthwashes on human enamel and restorative materials
Abstract The objective of this study was to evaluate the in vitro effects, including surface morphological characteristics and chemical elemental properties, of different mouthwash formulations on enamel and dental restorative materials, simulating up to 6 months of daily use. Human enamel samples, hydroxyapatite, composite resin, and ceramic surfaces were e
Braz. oral res.. Publicado em: 15/03/2018
-
4. A Novel Synthesis Route of Mesoporous γ-Alumina from Polyoxohydroxide Aluminum
Mesoporous gamma-aluminas (γ-Al2O3) were synthesized starting from an unusual precursor of polyoxohydroxide aluminum (POHA). This precursor was obtained from aluminum oxidation in alkaline water-ethanol solvent in the presence of d-glucose that induces the formation of a gel, which leads to the POAH powder after ethanolic treatment. Precipitated POHAs were
Mat. Res.. Publicado em: 22/01/2018
-
5. Pre-sintered Y-TZP sandblasting: effect on surface roughness, phase transformation, and Y-TZP/veneer bond strength
Abstract Sandblasting is a common method to try to improve the Y-TZP/veneer bond strength of dental prostheses, however, it may put stress on zirconia surfaces and could accelerate the t→m phase transformation. Y-TZP sandblasting before sintering could be an alternative to improve surface roughness and bonding strength of veneering ceramic. Objectives. Th
J. Appl. Oral Sci.. Publicado em: 2017-12
-
6. Dentin pretreatment and adhesive temperature as affecting factors on bond strength of a universal adhesive system
Abstract Objectives: To evaluate the effects of dentin pretreatment and temperature on the bond strength of a universal adhesive system to dentin. Material and Methods: Ninety-six extracted non-carious human third molars were randomly divided into 12 groups (n=8) according to Scotchbond Universal Adhesive (SbU) applied in self-etch (SE) and etch-and-rinse
J. Appl. Oral Sci.. Publicado em: 2017-10
-
7. VALIDAÇÃO DO PROCESSO DE ELETROCOAGULAÇÃO E AVALIAÇÃO DA ELETRODISSOLUÇÃO DE ELETRODOS NO TRATAMENTO DE EFLUENTES DE ABATEDOUROS DE AVES
The electrocoagulation have been considered a promising technology for wastewater food treatment. This paper evaluates the application of electrocoagulation for the treatment of poultry slaughterhouse wastewater using two types of electrode, iron and aluminum. The initial pH, the electrolysis time and the electrical current density were used as the operating
Quím. Nova. Publicado em: 2017-05
-
8. One-year aging effects on microtensile bond strengths of composite and repairs with different surface treatments
Abstract The present study aimed to evaluate effects of different surface treatments and aging of composite cylinders on bond strength of composite resin repair. Thirty-two composite cylinders were produced and divided into four groups according to type of surface treatment and storage time of composite cylinder and repair. Cylinder surface of control group
Braz. oral res.. Publicado em: 05/01/2017
-
9. Microcosm Biofilm Formation on Titanium Surfaces
Risk factors associated with peri-implantitis are related to the biofilm composition around the implant and the ability of bacterial adhesion. This study evaluated the biofilm formation on different surfaces of commercially pure titanium (CP Ti) grade 4 after 12, 24, 48 and 168 hours using the microcosm technique and scanning electron microscopy (SEM). The f
Mat. Res.. Publicado em: 2015-08
-
10. Corrosion protection in sulfate medium by self-assemb films adsorbed on AA 2024 T3 aluminum alloy surface
In this study, the corrosion protection provided by films of self-assembled molecules on the AA 2024-T3 aluminum alloy has been evaluated by electrochemical and non electrochemical techniques. The film was obtained by immersion of this alloy samples in a solution of 90 mg L-1 alkane-diphosphonate at 50 °C for 5 minutes. Chromating conversion treatment with
Matéria (Rio J.). Publicado em: 2015-06
-
11. Effects of acid treatment on the clay palygorskite: XRD, surface area, morphological and chemical composition
The palygorskite is an aluminum-magnesium silicate that has a fibrous morphology. Their physico-chemical characteristics are the result of high surface area, porosity and thermal resistance which make it an attractive adsorbent. Its adsorption capacity can be increased through chemical reactions and/or heat treatments. The objective of this work is to verify
Mat. Res.. Publicado em: 09/05/2014
-
12. Corrosion behavior of friction stir welded lap joints of AA6061-T6 aluminum alloy
In this work, the corrosion behaviors of friction-stir lap welding of 6061-T6 Al-alloy are studied. The friction-stir lap welding was performed under different welding conditions (rotation speed and welding speed). The corrosion behavior of the parent alloy, the weld nugget zone (WNZ), and the heat affected zone (HAZ) of each welded sample working as an elec
Mat. Res.. Publicado em: 09/05/2014