Surface Roughness And Color Stability
Mostrando 1-11 de 11 artigos, teses e dissertações.
-
1. Color stability and surface roughness of chitosan- and nanodiamond-modified bisacrylic resin
Abstract: The aim of this study is to evaluate the effect of chitosan or nanodiamond incorporation on the color stability and surface roughness of a bisacrylic resin subjected to artificial aging. Four bisacrylic resins were evaluated, namely, control, chitosan-modified material, nanodiamond-modified material, and chitosan–nanodiamond-modified material. Tw
Braz. oral res.. Publicado em: 04/04/2019
-
2. Avaliação do manchamento e da rugosidade superficial de materiais restauradores diretos após diferentes sistemas de polimento: estudo in vitro
Resumo Introdução Com o avanço estético e tecnológico dos compósitos restauradores diretos, a procura pela Odontologia Éstética tem aumentado. Objetivo Avaliar o manchamento e a rugosidade superficial dos compósitos Filtek Z350 (3M ESPE) e Filtek Bulk Fill (3M ESPE), polidos por diferentes sistemas: Disco SofLex e Disco SofLex diamantado espiral
Rev. odontol. UNESP. Publicado em: 11/03/2019
-
3. Color stability and surface roughness of artificial teeth brushed with an experimental Ricinus communis toothpaste
Abstract Aim: To evaluate, in vitro, the effect of brushing with a Ricinus communis-based experimental toothpaste on color stability and surface roughness of artificial teeth. Methods: Ninety artificial teeth (maxillary central incisors) in different shades, light and dark (NatusDent Triple Pressing, Dentbras) were used. Initial color (Spectrophotometer
Braz. J. Oral Sci.. Publicado em: 2015-12
-
4. Color Stability, Surface Roughness and Flexural Strength of an Acrylic Resin Submitted to Simulated Overnight Immersion in Denture Cleansers
Resumo O estudo avaliou a alteração de cor, rugosidade de superfície e força de flexão de espécimes de resina acrílica após imersão em peróxido alcalino e hipoclorito alcalino, simulando um ano e meio de uso seguindo a imersão noturna. Sessenta espécimes circulares (16 X 4 mm) e oitenta retangulares (65 X 10 X 3,3 mm) de resina acrílica termopo
Braz. Dent. J.. Publicado em: 2013-04
-
5. Efeito da escovação e do envelhecimento artificial acelerado sobre a alteração superficial de materiais restauradores estéticos / Effect of simulated toothbrushing and accelerated artificial aging on surface degradation of aesthetic restorative materials
O objetivo desse estudo foi avaliar sistematicamente o efeito da escovação simulada e do envelhecimento artificial acelerado (EAA) sobre estabilidade de cor e rugosidade de superfície de compósitos odontológicos de nanopartículas (Z350 - 3M ESPE) e híbrido (Tetric N-Ceram - Ivoclar Vivadent). Foram confeccionados 24 corpos-de-prova (12mm de diâmetro
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/04/2012
-
6. Color stability, surface roughness and microhardness of composites submitted to mouthrinsing action
OBJECTIVE:The purpose of this study was to evaluate the effect of mouth rinse solutions on color stability, surface roughness and microhardness of two composite resins. MATERIAL AND METHODS: Fifty test specimens of each composite (Filtek Z250 and Z350; 3M ESPE) were made using a teflon matrix (12x2 mm). Color, surface roughness and Knoop microhardness baseli
Journal of Applied Oral Science. Publicado em: 2012-04
-
7. Changes in surface roughness and color stability of two composites caused by different bleaching agents
O objetivo deste estudo foi avaliar o efeito de dois agentes clareadores (peróxido de hidrogênio a 10% e 35%) sobre a estabilidade de cor e rugosidade superficial de dois compósitos, um nanohíbrido e um nanoparticulado. Os espécimes foram polidos, envelhecidos, manchados, clareados e polidos novamente. A ação dos agentes clareadores sobre os compósit
Braz. Dent. J.. Publicado em: 2012
-
8. Análise da estabilidade de cor e rugosidade de superfície de compósitos submetidos à fumaça de cigarro / Color stability and surface roughness of dental composites exposed to cigarette smoke
O objetivo deste estudo foi avaliar a estabilidade de cor e rugosidade de superfície de 3 compósitos odontológicos com partículas diferentes: nanohíbrido (Tetric N-Ceram - Ivoclar Vivadent), híbrido (Z250 - 3M ESPE) e microhíbrido com matriz silorano (Filtek P90 3M - ESPE), submetidos à fumaça de cigarro. Para isso, foram obtidos 60 corpos-de-prova
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/11/2011
-
9. Alterações nas caracteristicas da superficie de compositos restauradores sumetidas a diferentes tecnicas de acabamento e polimento / Changes in surface characteristics of restorative composites subjected to different techniques for finishing and polishing
Several changes were made in the light-cured composites resins manufacture, especially trying to obtain better color stability, adequate wear resistance and clinically acceptable surface smoothness. About this, manufacturers have predominantly reduced the diameter of charged particles, promoting changes in its geometry and also incorporating a bigger amount
Publicado em: 2010
-
10. Influence of resin-composite formulation on the intra-oral degradation : in vitro study / Influencia da formulação de resinas compostas na resistencia a degradação intra-oral : estudo in vitro
Natural teeth, as well as restorations, are composed of materials that are subject to deterioration. Besides chemical, mechanical and thermo degradation, the formulation and post-cure composites network are dominant mechanism to determine the restorations longevity. The purpose of this study was to investigate the effect of materials formulation, light
Publicado em: 2008
-
11. "Envelhecimento artificial acelerado - Influência na alteração de cor e rugosidade superficial de resinas indiretas" / Artificial accelerated aging - Changes in color and surface roughness of indirect resins
This study had the aim of assessing in vitro color change and surface roughness of three brands of new generation indirect resins, after being submitted to accelerated aging process. Twelve specimens were constructed (15 mm diameter and 2 mm width) for the resins: Artglass (Heraeus Kulzer), Solidex (Shofu), Targis (Ivoclar Vivadent) which were finished and p
Publicado em: 2005