Surface Of Response
Mostrando 1-12 de 3498 artigos, teses e dissertações.
-
1. Study of Catalytic Pyrolysis of Biomass Sorghum (Sorghum bicolor L. Moench) Using Design of Experiments and Surface Response Methodology
This study proposes a screen of variables that have an influence on the modification of the bio-oil chemical composition as a unique critical quality attribute (CQA) throughout the pyrolytic process (zeolite, ZSM-5) by using a 24 full factorial design, followed by optimization through a response surface methodology (RSM) based on central composite design (CC
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
3. PLANEJAMENTO FATORIAL NA SÍNTESE DO OLEATO DE ETILA CATALISADA PELA LIPASE NATIVA DE Aspergillus niger
This work reports the use of the Octave, a free computational software, to optimize the experimental design in the synthesis of ethyl oleate from oleic acid and ethanol catalyzed by a native lipase from Aspergillus niger. The central composite factorial design (CCD) was performed with 2 levels and 3 variables (temperature, mass of native A. niger lipase and
Química Nova. Publicado em: 2022
-
4. A New Miniaturized Low-Profile and Stable Dual-Band FSS with 2.5D Structure for ISM Bands
Abstract Based on 2.5-Dimensional (2.5D) frequency selective surface (FSS) structures, a new miniaturized frequency selective surface structure is proposed in this work to operate as a bandreject filter in the 2.4 GHz (2400 to 2483.5 MHz) and 5 GHz (5150 to 5350 MHz and 5470 to 5725 MHz) ISM (Industrial, Scientific, and Medical) bands. The FSS has the metall
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
5. Intra- and interobserver agreement of histopathological findings in pediatric patients with eosinophilic esophagitis
Abstract Objective: To assess intra- and interobserver agreement among non-expert pathologists in identifying features of the eosinophilic esophagitis histologic scoring system (EoEHSS) in pediatric patients. Patients and methods: The authors used 50 slides from patients (aged 1-15 years; 72% male) with EoE. EoEHSS evaluates eosinophilic inflammation and o
Jornal de Pediatria. Publicado em: 2022
-
6. In vivo Administration of Testosterone Propionate in Cattle Analyzed by High Performance Liquid Chromatography-Tandem Mass Spectrometry: An Enzymatic Hydrolysis Study and Drug Abuse Issues
This study involved an animal experiment in which testosterone propionate was intramuscularly injected into four steers, and the ensuing urine samples were analyzed using high-performance liquid chromatography-tandem mass spectrometry. The enzymatic hydrolysis conditions were analyzed using analysis of variance (ANOVA) and response surface methodology employ
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
7. A novel fluorescence sensor for the detection of chloride ion in artificial sweat and environmental water with nitrogen-doped graphene quantum dots
A new fluorescent detection route for chloride ion was designed with Nitrogen-doped graphene quantum dots (N-GQDs), which were prepared by a traditional hydrothermal method with citric acid as carbon source and urea as nitrogen source. The prepared N-GQDs solution was light yellow, and the freeze-dried solid was black. It emitted blue light under ultraviolet
Química Nova. Publicado em: 2022
-
8. Additive Manufacturing towards the Fabrication of Greener Electrochemical Sensors for Antioxidants
Additive manufacturing is an emerging tool that has contributed to the sustainable fabrication of devices in several areas based on the concept of “zero waste”. Considering extrusion-based manufacturing (or 3D printing), polylactic acid (PLA) has been highlighted due to its biodegradability, obtention from renewable sources, and compatibility for 3D prin
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
9. MLA and optical microscopy as complementary techniques to the iron ore geometallurgical studies
Abstract Mineral liberation is an important variable to be considered in the iron ore geometallurgical studies, especially since it provides information leading to the understanding of the ore’s behaviour in the beneficiation process, mainly when harder ores are concerned. Nowadays, the professionals and researchers in the mineral industry have been using
REM - International Engineering Journal. Publicado em: 2022
-
10. TEST OF THE SCREENING AND PARAMETER OPTIMIZATION OF SWING SEPARATION SIEVE IN FIELD OPERATION
ABSTRACT The need for clarity regarding the sieving characteristics of the potato-soil mixture, as provided by the swing separating sieve of a potato digger, as well as the derived problems of low potato transportation efficiency, a high potato damage rate and low potato unearthing rate, are the main reasons for this study. Dynamic tracking technology is pro
Engenharia Agrícola. Publicado em: 2022
-
11. A Novel In Silico Monte Carlo Approach to Optimize a PSD Estimation Problem. Generation of Data Fusion Experiment Rules
ABSTRACT This article analyzes the performance of combining information from Scanning Electron Microscopy (SEM) micrographs with Static Light Scattering (SLS) measurements for retrieving the so-called Particle Size Distribution (PSD) in terms of experimental features. The corresponding data fusion is implemented using a novel Monte Carlo-based method consist
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
12. Feasibility of a snowball sampling survey to study active surveillance for thyroid microcarcinoma treatment among endocrinologists and surgeons of Brazil
Abstract Objectives: This study aims to investigate if a sampling method using virtual networks is feasible to survey AS adoption among this “hard-to-reach” population of Brazilian doctors. Methods: An online piloted 11-point structured survey questionnaire (designed using Googleforms®) probed the actual treatment patterns for adult patients with PTMC
Brazilian Journal of Otorhinolaryngology. Publicado em: 2022