Surface Modification
Mostrando 1-12 de 588 artigos, teses e dissertações.
-
1. Study of Catalytic Pyrolysis of Biomass Sorghum (Sorghum bicolor L. Moench) Using Design of Experiments and Surface Response Methodology
This study proposes a screen of variables that have an influence on the modification of the bio-oil chemical composition as a unique critical quality attribute (CQA) throughout the pyrolytic process (zeolite, ZSM-5) by using a 24 full factorial design, followed by optimization through a response surface methodology (RSM) based on central composite design (CC
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Boosting the Photocurrent of the WO3/BiVO4 Heterojunction by Photoelectrodeposition of the Oxy-Hydroxide-Phosphates Based on Co, Fe, or Ni
Here we investigated the photoelectrodeposition of oxygen-evolving catalysts (OECs) based on oxy-hydroxides-phosphates of Co, Fe, or Ni (CoPi, FePi, and NiPi) on the WO3/BiVO4 heterojunction and their activity in water oxidation. The OECs were deposited by cycles of (i) open-circuit potential (OCP) and (ii) applying a potential positive enough to oxidize the
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Acid matrix production from treated natural vermiculite-hydrobiotite
Abstract Given the potential of acid-activated clays in adsorptive and catalytic processes, several studies focusing on acid matrices have grown over the years, making it possible to study vermiculite, a mineral composed of a type 2:1 unit cell with tetrahedral and octahedral sheets. Therefore, this work aimed to study vermiculite treated with acids for the
Cerâmica. Publicado em: 2021-06
-
4. Organophilic clays and their application in atrazine adsorption
Abstract Atrazine’s adsorptive capabilities make the use of clays practical and effective. Three types of organophilic clays modified by cationic surfactants with the ability of one of these clays to adsorb atrazine in an aqueous medium are discussed in this work. The modification in clays was done with the surfactants cetyltrimethylammonium bromide, cetyl
Cerâmica. Publicado em: 2021-06
-
5. Molecularly Imprinted Polypyrrole on Glassy Carbon Electrode Modified with Reduced Graphene Oxide and Gold Nanoparticles for Isoamyl Alcohol Analysis in Fusel Oil
A molecularly imprinted electrochemical sensor for determination of isoamyl alcohol was successfully constructed by modifying the glassy carbon electrode (GCE) with gold nanoparticles (AuNPs) and reduced graphene oxide (RGO). The modification of the GCE increased the electron transfer rate and the electrode surface area, which, consequently, made more room a
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
6. AVALIAÇÃO DE NANOTUBOS DE CARBONO FUNCIONALIZADOS VISANDO O DESENVOLVIMENTO DE MÉTODOS DE PRÉ-CONCENTRAÇÃO DE ÍONS METÁLICOS E DETERMINAÇÃO POR TÉCNICAS ESPECTROMÉTRICAS E ELETROANALÍTICAS
This review focuses on the use of functionalized carbon nanotubes (CNTs) on the development of preconcentration methods with substantial contributions on selectivity and sensitivity for metal ions determination. CNTs have been usually employed in the development of preconcentration/speciation coupled to spectroanalytical techniques for ions determination at
Quím. Nova. Publicado em: 2020-09
-
7. CONVERSÃO FOTOELETROCATALÍTICA DE CO2 E BIOGÁS EM PRODUTOS DE INTERESSE ENERGÉTICO UTILIZANDO SEMICONDUTORES NANOESTRUTURADOS DE Ti/TiO2 MODIFICADOS COM ÓXIDO DE COBRE
This work describes the superficial modification of Ti/TiO2 nanotubes by copper oxide electrochemical deposition, in different temperatures (25 and 65 ºC), and its application on the photoelectrocatalytic conversion of CO2 and biogas in products of energy interest. The different temperatures deposition resulted in the formation of different geometric forms
Quím. Nova. Publicado em: 2020-02
-
8. STABILIZATION STUDY OF TETRAMERIC Kluyveromyces lactis β-GALACTOSIDASE BY IMMOBILIZATION ON IMMOBEAD: THERMAL, PHYSICO-CHEMICAL, TEXTURAL AND CATALYTIC PROPERTIES
Abstract We investigated the immobilization of a tetrameric Kluyveromyces lactis β-galactosidase (EC: 3.2.1.23) (KL-Gal) on Immobead 150 using different support modification strategies. Immobead support was modified using an acid solution of H2SO4:HNO3 (3:1) (Immobead-Ac) or 5 % (v/v) glutaraldehyde (Immobead-Glu). Its unmodified form (Immobead) was also te
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
9. SISTEMAS PEDOGEOMORFOLÓGICOS NA INTERPRETAÇÃO DA EVOLUÇÃO DE PAISAGENS QUATERNÁRIAS EM CLIMAS TROPICAIS ÚMIDOS
Resumo As relações entre solo e relevo são constantes em paisagens de climas tropicais e subtropicais úmidos, devido aos espessos mantos regolíticos resultantes de acelerado intemperismo físico, químico e biológico. A investigação dos sistemas pedogeomorfológicos merece destaque em análises sistêmicas, que objetivam o estudo da gênese e dos pro
Mercator (Fortaleza). Publicado em: 09/12/2019
-
10. Dendritic Gold Nanoparticles Towards Transparent and Electroactive Electrodes
Abstract: The combination of UV-visible absorption and electrochemical experiments (spectroelectrochemistry) enables to obtain highly specific spectroscopic information (in situ and operando) from modified surfaces. However, such application can be limited by the self-absorbance, for example, when metallic nanoparticles are present on modified surfaces. Indi
An. Acad. Bras. Ciênc.. Publicado em: 28/11/2019
-
11. Ancoragem da prata em substratos cerâmicos para tratamento de água de consumo
Resumo A fabricação de vasos cerâmicos impregnados com prata possibilita o acesso à água potável de uma forma barata e com fabricação relativamente simples. Este estudo teve como objetivo promover a modificação superficial de filtros cerâmicos utilizando APTES e EDTA como agentes ancoradores para melhorar a impregnação da prata e a eficiência e
Cerâmica. Publicado em: 14/11/2019
-
12. Assessment of sulfamethoxazole adsorption capacity on Pirangi clay from the State of Sergipe, Brazil, modified by heating and addition of organic cation
Resumo O sulfametoxazol (SMX) é um antibiótico amplamente usado no tratamento de doenças e infecções e é frequentemente detectado em ecossistema de águas superficiais. Assim, este trabalho avaliou a capacidade de remoção deste antibiótico de sistemas aquosos utilizando argila Pirangi (PIR) do estado de Sergipe (Brasil). Amostras de argila Pirangi f
Cerâmica. Publicado em: 14/11/2019