Surface Energy
Mostrando 1-12 de 1316 artigos, teses e dissertações.
-
1. Study of rhombohedral tricalcium phosphate in hexagonal crystal structure family on the sample prepared by the sol-gel route and the effect of calcination temperature
Abstract The effect of the calcination temperature at 800 and 1000 °C on the stable formation of the tricalcium phosphate with rhombohedral structure in the system of the hexagonal crystal family was determined, while its precursor was made from limestone obtained from nature in the Lumajang district, Indonesia. The rhombohedral tricalcium phosphate samples
Cerâmica. Publicado em: 2023
-
2. Tuning the Photocatalytic Activity of Tin Oxide through Mechanical Surface Activation
Tin oxide (SnO2) nanoparticles were synthesized by the co-precipitation method and mechanically modified by high-energy ball milling. The experimental results demonstrate that the collision with zirconia balls produces slight changes in the crystalline, electronic, morphological, and surface properties of SnO2, which lead to an increase in the redox potentia
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. Iron Cobaltite (FeCo2O4) Nanocatalysts for Water-Oxidation: Effects of Annealing Temperature on Catalytic Properties
The development of efficient, stable, and non-precious metal water oxidation catalysts (WOCs) is a matter of importance for sustainable energy research. In this work, iron cobaltite (FeCo2O4) nanoparticles were prepared by the coprecipitation method, and we present the effect of heat treatment (250, 350, 450, 650 and 900 °C) on the catalytic properties. Cat
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
6. The Influence of the Platinum Weight Percentage in the Catalyst Formulation on the Performance of a High Temperature Ethanol Electroreformer Based on H3PO4 Doped Polybenzimidazole for Green Hydrogen Production
A vapor-fed high temperature proton exchange ethanol electroreformer has been developed based on the use of a H3PO4-doped polybenzimidazole membrane to produce green hydrogen. As a key parameter, this article describes the influence of platinum weight percent (wt.%) in the catalyst formulation from different commercial catalysts (20, 40, 60, 80 wt.% Pt/C and
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
7. Musculoskeletal effects of obesity and bariatric surgery – a narrative review
Abstract Obesity affects several areas of the human body, leading to increased morbidity and mortality and the likelihood of other diseases, such as type 2 diabetes mellitus, cardiovascular diseases and musculoskeletal disorders. These conditions predispose to bone fractures and sarcopenic obesity, defined by the presence of an obesity-associated decrease in
Archives of Endocrinology and Metabolism. Publicado em: 2022
-
8. Green Synthesis of Upconverting NaYF4 and NaGdF4 Materials and Energy Levels Determination
An alternative green route using a domestic microwave oven to synthesize NaGdF4:Yb,Tm and NaYF4:Yb,Er was successfully developed. Decreasing dopants concentration increased the β-NaREF4/α-NaREF4 ratio in NaGdF4. The scanning electron microscopy (SEM) images of NaGdF4 showed particles ranging from 500 nm to 1 μm with formation of aggregates up to 100 μm,
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
9. Shelf-life assessment of energy banana bar using acceleration method with critical moisture content approach
Abstract The shelf-life of the product need to be evaluated according to the commercialization of the product. Shelf-life assessment of the product can be done using acceleration method (Accelerated Shelf-life Testing) with critical moisture content approach. This research used the acceleration method to predict the expired date of the energy bar based banan
Food Sci. Technol. Publicado em: 2021-06
-
10. Aplicação de SEBAL e Ts/VI Trapézio Modelos para Estimar a Evapotranspiração Real no Ambiente do Argelino Semi-árido para Melhorar a Gestão da água na Agricultura
Resumo Estimativas precisas da evapotranspiração (ET) e dos fluxos de energia na superfície são cruciais para muitas aplicações agro ambientais, incluindo a determinação do balanço hídrico, manejo da irrigação, zoneamentos agro ecológicos, simulações de mudanças globais no uso da terra e previsão da produção de culturas agrícolas. Modelos
Rev. bras. meteorol.. Publicado em: 2021-06
-
11. Nanofibras eletrofiadas e suas aplicações: avanços na última década
In recent years there has been an increasing interest in the development of nanomaterials with improved properties compared to their counterparts at the micro- and macroscopic scale. In this context, nanofibers obtained by electrospinning technique are highly attractive due to the unique combination of high surface area/volume ratio, porosity, flexibility, m
Quím. Nova. Publicado em: 2021-06
-
12. Evapotranspiração da bananeira através do algoritmo SEBAL em perímetro irrigado do Nordeste brasileiro
RESUMO Objetivou-se com este estudo estimar a evapotranspiração da bananeira (Musa spp.) num perímetro irrigado do município de Barbalha, CE, utilizando o modelo Surface Energy Balance Algorithm for Land (SEBAL) e comparar estes resultados com os estimados através do Método de Penman-Monteith. Foram utilizadas imagens de satélite Landsat-8 OLI/TIRS do
Rev. bras. eng. agríc. ambient.. Publicado em: 2021-03