Surface Density
Mostrando 25-36 de 1625 artigos, teses e dissertações.
-
25. Grafting polypropylene over hollow glass microspheres by reactive extrusion
Abstract Hollow glass microspheres HGM are light, round, hollow, hydrophilic microspheres used to produce polyolefin composites with reduced density. To maintain mechanical strength, it is necessary to improve the adhesion between the polymer matrix and the microspheres, which is done by a compatibilizer. For polypropylene composites a maleic anhydride graft
Polímeros. Publicado em: 10/10/2019
-
26. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
27. Comparative study of four different types of intraperitoneal mesh prostheses in rats
Abstract Purpose: To compare four types of mesh regarding visceral adhesions, inflammatory response and incorporation. Methods: Sixty Wistar rats were divided into four groups, with different meshes implanted intraperitoneally: polytetrafluoroethylene (ePTFE group); polypropylene with polydioxanone and oxidized cellulose (PCD); polypropylene (PM) and polyp
Acta Cir. Bras.. Publicado em: 12/09/2019
-
28. On-load Back-EMF Optimization Based on the Back-EMF MST Method and Parametric Optimization
Abstract This paper proposes an optimal design for a surface mounted permanent magnet synchronous machine (SM-PMSM) based on parametric optimization process to reduce the on-load Back-EMF distortions caused by an increase in the electromagnetic load and in the saturation. Unlike conventional methods described in the literature, the optimization approach prop
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
29. Morphological and molecular characterization of Puccinia kuehnii, the causal agent of sugarcane orange rust, in Cub
ABSTRACT Sugarcane orange rust caused by Puccinia kuehnii has recently become an important disease in sugarcane crops and its spread is causing great concern to growers. In this study, we analyzed spores from symptomatic orange rust sugarcane leaves collected in multiple locations in Cuba in a 4-year-period in order to characterize morphological traits of P.
Sci. agric. (Piracicaba, Braz.). Publicado em: 02/09/2019
-
30. CARTAGO CASE STUDY: WASTE WATER MANAGEMENT IN RURAL AREAS OF COSTA RICA
Resumo Este artigo compila informações sobre a gestão de águas cinzas e negras em áreas rurais da província de Cartago na Costa Rica, durante os anos de 2014 até 2016. Foram avaliadas 21 de um total de 135 comunidades. Os dados apresentados são referentes a 614 famílias localizadas nas áreas rurais da província. Foram realizadas visitas a campo pa
Ambient. soc.. Publicado em: 26/08/2019
-
31. Glycerol Effect on the Corrosion Resistance and Electrodeposition Conditions in a Zinc Electroplating Process
Zinc electrodeposition is an economical process of Zn coating compared to conventional galvanic process. The galvanizing process is used in various industrial sectors to protect ferrous alloys during the corrosion process. In buildings, the galvanizing process is widely used to coat mortar protective screens. The electrodeposition of zinc has a relatively lo
Mat. Res.. Publicado em: 19/08/2019
-
32. PEDOGENESIS ON COASTAL TABLELANDS AREA WITH LOW RANGE ALTIMETRY IN PARAÍBA STATE
RESUMO Pequenas variações de relevo influenciam na drenagem e no escoamento superficial, contribuindo para a formação de horizontes superficiais arenosos e subsuperficiais endurecidos (fragipãs e, ou, duripãs) em solos dos Tabuleiros Costeiros. Este trabalho investigou a pedogênese em área de Tabuleiros Costeiros com baixa amplitude altimétrica no E
Rev. Caatinga. Publicado em: 18/07/2019
-
33. Nanostructured Films Produced from the Bleached Pinus sp. Kraft Pulp
RESUMO Este trabalho investiga as propriedades físicas e mecânicas de filmes nanoestruturados produzidos a partir da polpa kraft branqueada de Pinus sp. Para obter a nanocelulose, a polpa kraft branqueada foi submetida a seis diferentes intensidades de desfibrilação pelo moinho: dois, cinco, dez, 20, 30 e 40 passes. A influência do número de passes foi
Floresta Ambient.. Publicado em: 04/07/2019
-
34. Shear Strength of a typical soil from Manaus, Brazil, stabilized with ceramic residue additive
ABSTRACT The purpose of this study is to determine the geotechnical behavior of a clayey surface soil typical to the Manaus region (Amazonas, Brazil), when mixed with ceramic powder from brick residue produced by potteries located in the county of Iranduba, Amazonas, Brazil, and with residual sand (the reference mixture), commonly used in pavements in the re
Matéria (Rio J.). Publicado em: 10/06/2019
-
35. Produção de compósitos madeira-cimento de baixa densidade pelo método vibro-dinâmico de compactação
RESUMO Esse trabalho teve como objetivo avaliar o potencial de uso da madeira de quatro espécies tropicais da Amazônia na produção de compósitos madeira-cimento pelo método de adensamento por vibro compactação. As partículas de madeira foram produzidas a partir de costaneiras das espécies Murici (Byrsonima crispa), Ingá vermelho (Inga paraensis),
Matéria (Rio J.). Publicado em: 10/06/2019
-
36. On Estimation of Adhesive Strength of Implants Bioactive Coating with Titanium by Density Functional Theory and Molecular Dynamics Simulations
One of the ways to improve and accelerate osseointegration of a surgical implant with bone is application of biocompatible coatings, in particular, hydroxyapatite (HAp). Since the cases of delamination of the coating take place in dental practice, it is very important to estimate the adhesive strength of HAp with the implant. A measure of the coating-to-subs
Mat. Res.. Publicado em: 30/05/2019