Subgrid Model
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. A numerical study on the aerodynamic performance of building cross-sections using corner modifications
Abstract A numerical investigation is performed in this work in order to evaluate the aerodynamic performance of building cross-section configurations by using corner modifications. The CAARC tall building model is utilized here as reference geometry, which is reshaped considering chamfered and recessed corners. The numerical scheme adopted in this work is p
Lat. Am. j. solids struct.. Publicado em: 30/07/2018
-
2. Numerical analysis of the nonlinear subgrid scale method
This paper presents the numerical analysis of the Nonlinear Subgrid Scale (NSGS) model for approximating singularly perturbed transport models. The NSGS is a free parameter subgrid stabilizing method that introduces an extra stability only onto the subgrid scales. Thisnew feature comes from the local control yielded by decomposing the velocity field into the
Comput. Appl. Math.. Publicado em: 2012
-
3. Simulation of two-dimensional high reynolds number wake flows with the use of filtered lagrangian navier-stokes equations
This work presents a method for numerical simulation of viscous fluid flows based on the use of filtered Lagrangian Navier-Stokes equations. It is based on the hypothesis that the small scale motions are responsible for the homogenization of the physical properties in infinitesimal fluid parcels through a mixing process, mathematically expressed as a spatial
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-03
-
4. Efeitos de modelos submalha em escoamentos em ciclones
A Large-Eddy Simulation (LES) of a single-phase turbulent flow in flat bottom model cyclone geometry was performed. The chosen fluid has the physical properties of air, and the particulate phase was not considered in this work, so the underflow duct was not considered idem, which means that the simulated cyclone has only one output (the overflow duct). The c
Publicado em: 2009
-
5. Modelagem de uma chama de difusão turbulenta pela simulação de grandes escalas. / Modeling of a turbulent diffusion flame with the method of large eddy simulation.
The mean goal of this work was to better understand the dynamics of turbulent diffusion flames. The turbulent flow was resolved appling the methodology of Large Eddy Simulation, coupled with the Flamesheet model for reactive systems. The effects of the turbulent subgrid dissipation were accounted with the Smagorinsky (1963) subgrid model. The numerical code
Publicado em: 2009
-
6. Simulação sub-malha com modelo de dois fluidos do escoamento gás-sólido em risers de leitos fluidizados circulantes / Sub-grid simulation with two-fluid model to gas-solid flow in circulating fluidized bed risers
Modelagem de dois fluidos é largamente aplicada para simular escoamentos gássólido em risers de leitos fluidizados circulantes. As atuais simulações são de grandes clusters (SGC), executadas em domínios reais com malhas numéricas grosseiras, ou simulações sub-malha, executadas em malhas numéricas refinadas em domínios reduzidos. O propósito das
Publicado em: 2008
-
7. ESTUDO DO CICLO DIÁRIO DA CAMADA LIMITE PLANETÁRIA ATRAVÉS DA SIMULAÇÃO DOS GRANDES TURBILHÕES / STUDY OF DAILY CYCLE OF PLANETARY BOUNDARY LAYER BY LARGE EDDY SIMULATION
The PBL is the region on the troposphere characterized by existence of turbulence (BUSINGER, 1981). Turbulent flow is that when the fluctuations of the variables that describe the flow are amplified in time and space (LANDAU; LIFSHITZ, 1959). The study of the planetary boundary layer (PBL) through the computational fluid dynamics, particularly the large eddi
Publicado em: 2008
-
8. Nonlinear subgrid methods for convection-difusion-reaction problem / Métodos submalhas não lineares para o problema de convecção-difusão-reação
This work presents a general framework for approximating convection-diffusion-reaction equations based on principles of scale separation. A two-level decomposition of the discrete approximation spaces is performed and the local problem is modified introducing an artificial viscosity acting only on the subgrid scales. The key feature is the local control comi
Publicado em: 2007
-
9. Large eddy simulation of three-dimensional turbulent flows by the finite element method
The main objectives of this work are the formulation, implementation and applications of a numerical algorithm to simulate turbulent, incompressible, isothermal flows. The transient three-dimensional flow is analyzed using an explicit Taylor-Galerkin scheme and the finite element method with hexahedrical eight-node element. Turbulence is simulated using Larg
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2006-06
-
10. Large eddy simulation applied to reciprocating compressors
This paper considers the application of large-eddy simulation (LES) to predict the performance of hermetic reciprocating compressors utilized in refrigeration. In such devices the pressure difference between the suction/discharge chamber and the cylinder, established by the piston motion, is responsible for the valve opening. Once the valves are open, the fl
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2006-06
-
11. Largeeddy simulation in three dimentional liddriven cavities using dynamic models / SimulaÃÃo numÃrica de grandes escalas em cavidades tridimensionais com tampa deslizante utilizando modelagem dinÃmica
In the present work a numerical code of fourth order in space and third order in time, with dynamical turbulence model was developed. This code was applied in order to study turbulence transition in liddriven cavity flow in bi and threedimensional configurations. The simulations had been carried out for bi and threedimensional configurations. The twodimensio
Publicado em: 2006
-
12. Simulação de escoamentos gás-sólido reativos em leitos fluidizados circulantes / Simulation of reactive gas-solid flows in circulating fluidized beds
Circulating fluidized bed reactors are widely used in large scale applications such as catalytic cracking of petrol and coal combustion. Development and design in those areas are strongly based on demonstration plants, at extremely high costs. In this context, treatments applying computational fluid mechanics assume considerable relevance. The complex gas-so
Publicado em: 2006