Structure Of The Solids
Mostrando 1-12 de 87 artigos, teses e dissertações.
-
1. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
2. BIONANOCOMPÓSITOS POLIMÉRICOS À BASE DE MONTMORILLONITA – MATERIAIS DE INTERESSE CONTÍNUO
Polymeric bionanocomposites are versatile materials that have many practical applications. The wide use of these materials is mainly due to their structure and properties, which combine at nanometric scale, the functionality of biopolymers with the excellent stability of inorganic solids, such as the clay minerals family. Montmorillonite is the most widely e
Quím. Nova. Publicado em: 2020-12
-
3. Structure and dynamics of the protoplankton community in an environmentally protected urban stream
Resumo O objetivo foi investigar, em escalas espacial e temporal, a abundância das comunidades de protozoários bem como os fatores intervenientes na estruturação das mesmas em um córrego urbano. Métodos: Amostras de água para análise de comunidades biológicas (amebas testáceas, ciliados e bactérias) e para análise de variáveis limnológicas fora
Braz. J. Biol.. Publicado em: 02/12/2019
-
4. A mata ripária influencia a composição e estrutura da comunidade zooplanctônica de poças temporárias?
RESUMO Poças temporárias são importantes ampliadores da biodiversidade local, sobretudo em áreas florestadas estacionais. Alterações na cobertura vegetal ao longo das margens desses corpos hídricos podem alterar a composição e estrutura da sua comunidade zooplanctônica. Nesse sentindo, testamos a hipótese de que a presença de mata ripária altera
Iheringia, Sér. Zool.. Publicado em: 11/11/2019
-
5. Milk from different species on physicochemical and microstructural yoghurt properties
RESUMO: O objetivo da presente pesquisa foi avaliar as diferenças nas propriedades químicas e na estrutura física do iogurte produzido com leite de diferentes espécies (ovinos, bovinos e caprinos). Para cada experimento, leite de ovelha cru (S), vaca (C) e cabra (G), foram usados para fabricar 4L de iogurtes (Y) de cada espécie (SY, CY e GY, respectiva
Cienc. Rural. Publicado em: 13/06/2019
-
6. Structure and ecological aspects of zooplankton (Testate amoebae, Rotifera, Cladocera and Copepoda) in highland streams in southern Brazil
Resumo Objetivo: Este estudo teve como objetivo caracterizar a estrutura do zooplâncton em rios de montanha no sul do Brasil, sub-bacia do rio Pelotas, bem como, as respectivas relações com as condições ambientais nas diferentes estações do ano. Métodos O zooplâncton foi coletado usando uma rede de plâncton (malha de 68 μm) e concentrado em um
Acta Limnol. Bras.. Publicado em: 18/02/2019
-
7. Limnology of shallow lakes of the semi-arid Central Pampa of Argentina
Resumo Objetivo No Pampa Central da Argentina, há três regiões fitogeográficas criadas pela diminuição da precipitação vinda do oeste. Essa região possui um grande número de lagos sendo a maioria desses temporários com hidroperíodos definidos por ciclos climáticos, embora alterados pela ação antrópica. Alguns desses lagos foram estudados co
Acta Limnol. Bras.. Publicado em: 18/02/2019
-
8. Manipulation of Glassy State in Amorphous Selenium by Low-temperature Internal Friction Measurements
We have studied the thickness and quench-rate dependent internal friction of amorphous selenium (a-Se) thin films deposited at room temperature. The internal friction of a-Se films exhibit a temperature independent plateau below 1 K followed by a broad maximum at 10 K. The plateau, which is seen in almost all amorphous solids, is caused by dissipation by two
Mat. Res.. Publicado em: 07/06/2018
-
9. The structural modification of cassava starch using a saline water pretreatment
Abstract The cassava has been modified successfully by using the saline water, which was abundantly available on the planet. The biomass was submerged in saline waters that salt concentrations were altered at 0, 3.5 percent (seawater) and 10 percent (w/w) and were kept 5 days. After recovery by washing steps, the treated solids were characterized by using X
Food Sci. Technol. Publicado em: 05/04/2018
-
10. Cellular Ceramics Produced from Ceramic Shell: Processing and Characterization
In this work, ceramic shell (mullite source), an industrial solid waste from the lost-wax casting process, after crushing and milling steps, was used and evaluated as an alternative raw material source for the production of cellular ceramics for high temperature applications (> 1400 °C). The obtained ceramic shell powder, with particle size distribution (d5
Mat. Res.. Publicado em: 09/11/2017
-
11. Effect of Urea Excess on the Properties of the MgAl2O4 Obtained by Microwave-Assisted Combustion
In this paper, magnesium aluminate spinels were prepared by microwave-assisted combustion, using urea as fuel. In order to evaluate the effect of the urea excess used in the synthesis, its mass was added in a range of 1.0 to 2.5 times the stoichiometric amount required. The materials produced were characterized by TGA, FTIR, XRF, XRD, BET, SEM and TEM. The r
Mat. Res.. Publicado em: 23/10/2017
-
12. Influence of Aluminum Addition in the Framework of MCM-41 Mesoporous Molecular Sieve Synthesized by Non-Hydrothermal Method in an Alkali-Free System
Purely siliceous MCM-41 and Al-containing MCM-41 (Al-MCM-41) mesoporous materials were synthesized by non-hydrothermal method in alkali-free ions medium at room temperature and short reaction times. Under these synthesis conditions, it was also investigated the influence of Al incorporation in the crystal structure of MCM-41. The solids were characterized by
Mat. Res.. Publicado em: 17/08/2017