Structural Properties
Mostrando 1-12 de 2959 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. The influence of compositional variability of dimension stone residues on the properties of rustic porous ceramic tiles
Abstract This study analyzed how the compositional variability of dimension stone residues influences the characteristics of rustic porous ceramic tiles. The specimens were prepared by adding 20 wt% of dimension stone residue to the clay and sintered at 1000 °C for 1 h. The testing assays performed were physical properties and structural analysis through sc
Cerâmica. Publicado em: 2023
-
3. Effect of candesartan treatment on echocardiographic indices of cardiac remodeling in post-myocardial infarction patients
SUMMARY Objective: Myocardial infarction has unfavorable effect on structural and functional properties of the myocardium, referred to as cardiac remodeling. Left ventricular mass, left ventricular mass index, and relative wall thickness are important predictors of cardiac remodeling. In this study, we investigated the effect of candesartan treatment in com
Revista da Associação Médica Brasileira. Publicado em: 2023
-
4. ATIVIDADE ANTIMICROBIANA DE QUITOSANAS E SEUS DERIVADOS: INFLUÊNCIA DAS CARACTERÍSTICAS ESTRUTURAIS
In recent years, there has been an increasing interest in the development of antimicrobial materials for different applications, especially in the biomedical field. In this context, chitosan is one of the most employed materials due to its highly attractive properties, such as biocompatibility, biodegradability, non-toxicity, and antimicrobial activity again
Química Nova. Publicado em: 2022
-
5. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
6. Analysis and evaluation of structural properties of Co3O4 microparticles obtained at low temperature
Abstract In the present research, the synthesis of cobalt oxide Co3O4 was carried out using the sol-gel technique with subsequent heat treatment at 225 and 235 °C. The final product obtained was characterized by X-ray diffraction (XRD), showing a pure crystalline phase of Co3O4, cell parameters a=b=c=8.071 Å, and a volume of 525.7 Å3. The particle size wa
Cerâmica. Publicado em: 2022
-
7. A New Synthetic Route and Comprehensive Topological Study of a Benzimidazole Derivative
Benzimidazole and its derivatives are molecules that have diverse biological properties, therefore we synthesized and studied a new benzimidazole to understand their physical/chemical properties. The compound was obtained through a new synthetic route, using graphite oxide, in the absence of solvent, with crystalline packaging supported by C-H…N and C-H…
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. Synthesis and characterization of α-SnWO4 powders obtained by microwave-assisted hydrothermal method
Abstract The structural, morphological, and optical properties of α-SnWO4 synthesized by microwave-assisted hydrothermal method at 150 °C for different times were investigated. XRD revealed the formation of the orthorhombic phase, without the presence of a secondary phase. The sample processed for 64 min showed a reduction in unit cell volume, suggesting a
Cerâmica. Publicado em: 2022
-
9. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
10. Finite element computational development for thermo-mechanical analysis of plane steel structures exposed to fire
Abstract This article presents a numerical formulation based on finite element procedures for application in nonlinear thermo-mechanical analyses of steel planar structures under fire condition. The mechanical properties of structural elements degrade when subjected to high temperatures, resulting in significant reductions in strength and stiffness. Under th
REM - International Engineering Journal. Publicado em: 2022
-
11. GRAPHEN-PHENYL-NH2 AS NANOCARRIER: A DENSITY FUNCTIONAL THEORY STUDY
Recently, graphene and modified graphene as one of the most suitable and the most important carbon nanomaterials have been introduced for drug delivery. In this paper, we have studied the binding characteristics of the EDC-NHS cross-linking process of graphene-phenyl-NH2 and 5-aminolevulinic acid (ALA) drug in both gas and solvent phases by density functiona
Química Nova. Publicado em: 2022
-
12. Quality Control for Lignin and Gelatin Microcapsules Loaded with Orange Essential Oil
Sustainable natural product-based microstructured systems and biopolymers are strong candidates for use in crop protection. Lignin and gelatin microcapsules loaded with orange essential oil were developed with spray-drying in order to enhance its potential. We evaluated the microparticle controlled release mechanisms, biological effects, structural and therm
Journal of the Brazilian Chemical Society. Publicado em: 2022