Structural Behaviour
Mostrando 1-12 de 152 artigos, teses e dissertações.
-
1. Nonlinear static analysis of a pile-supported wharf
Resumo O objetivo deste artigo é desenvolver uma análise estática não-linear através de um estudo de caso de um cais sobre estacas situado em uma nova área portuária para petroleiras. A atividade sísmica da área é muito intensa com uma aceleração máxima do solo de 0.55 g. Por esta razão, é muito importante analisar o comportamento estrutural n
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
2. Increasing Consumers’ Hypermarket Visit Intention through Cause-Related Marketing: A Perspective from the Theory of Planned Behaviour
Resumo Objetivo: Este estudo pretende abranger os fatores que afetam a intenção dos consumidores de participar de um marketing relacionado a uma causa (MRC) e como o MRC influencia sua intenção de visitar os hipermercados na Malásia. Metodologia: Por meio de um questionário respondido pelo próprio entrevistado e utilizando uma técnica de intercepta
Rev. bras. gest. neg.. Publicado em: 23/09/2019
-
3. Structural Behaviour of Cold-Formed Steel of Double C-Lipped Channel Sections Integrated with Concrete Slabs as Composite Beams
Abstract Cold-formed steel (CFS) construction is widely recognised as an important contributor to sustainability and green construction. Thus, the use of CFS construction is encouraged and had been advanced by innovations in its structural applications. One such innovation that has recently gained popularity is the use of CFS sections in composite constructi
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
4. Compliance fiscal e regulação fiscal cooperativa
Resumo A partir da análise crítica do contexto atual e da utilização do método dedutivo fundado em pesquisa bibliográfica, objetiva-se, neste artigo, trazer à discussão algumas deficiências da política fiscal adotada e também a necessidade de mudanças no sistema tributário, com enfoque para as possibilidades advindas da atuação estatal regulad
Rev. direito GV. Publicado em: 02/05/2019
-
5. Behaviour of hollow circular section with multiple perforations under compression, flexure and torsion
Abstract Effect of the presence of perforations on thin structure has been extensively investigated for decades. Various perforation parameters were investigated in past studies. However, study on thin cylinder with multiple perforations has not been carried out. In searching for lighter structural members, the concept of perforated hollow section has been i
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
6. Experimental exploratory study of failure modes in models of wooden rectangular beams of Hymenae spp
ABSTRACT According to the study of mechanical properties, wood is an elastic or elastoplastic material that presents different structural behaviour when tensioned or compressed. From the viewpoint of elasticity, wood is considered anisotropic, or rather it is a material with elastic properties that vary with the direction considered. During tree growth, the
Matéria (Rio J.). Publicado em: 05/03/2018
-
7. Analysis of Structural Crashworthiness and Estimating Safety Limit Accounting for Ship Collisions on Strait Territory
Abstract A series of analyses are carried out to predict the structural crashworthiness of a ship during a collision. The numerical configuration is verified by structural simulations based on a laboratory experiment wherein a penetration test is considered as the experimental reference. Comparative observations of structural behaviour are carefully conducte
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
8. Wear Behaviour of Electroless heat Treated Ni-P Coatings as Alternative to Electroplated hard Chromium Deposits
In this present study was evaluated the influence of heat treatment on the wear resistance of electroless high phosphorus nickel coating (9-10% P wt.). In addition, both untreated and treated Ni-P deposits were then compared to electroplated hard chromium coatings in terms of wear behaviour. Three different heat treatment conditions were performed at tempera
Mat. Res.. Publicado em: 24/07/2017
-
9. Tensile Behaviour and Durability Issues of Engineered Cementitious Composites with Rice Husk Ash
ABSTRACT The Engineered Cementitious Composites (ECC) is a special type of High Performance Fibre Reinforced Cementitious Composite (HPFRCC) characterized by a high tensile ductility with a 2% maximum volume of micro fibres. ECC has a tensile strain-hardening performance that leads to multiple cracking behaviour, thus providing the high ductility to the conc
Matéria (Rio J.). Publicado em: 20/07/2017
-
10. Structural Analysis of the Double Bottom Structure During Ship Grounding by Finite Element Approach
Abstract Possibility of a water-transportation mode to experience numerous accidental loads is predicted limitless and always demand sustainable analysis. Impact phenomenon raises as main reason of environmental damage, for instance, grounding contributes in form of short-time impact and produces massive damage on the bottom structure of a marine vessels, e.
Lat. Am. j. solids struct.. Publicado em: 2017-06
-
11. Thickness Dependent Structural and Electrical Properties of Magnetron Sputtered Nanostructured CrN Thin Films
In the present work, we have investigated the structural and electrical properties of CrN thin films for a thickness t in the 30-220 nm range, grown on Si (100) substrates. The CrN/Si (100) films exhibits a structural transition from hexagonal phase (β-Cr2N) to cubic phase (CrN) with the increasing in film thickness, the change in structural transition is a
Mat. Res.. Publicado em: 10/04/2017
-
12. Non-Linear Three Dimensional Finite Elements for Composite Concrete Structures
Abstract The current investigation focused on the development of effective and suitable modelling of reinforced concrete component with and without strengthening. The modelling includes physical and constitutive models. New interface elements have been developed, while modified constitutive law have been applied and new computational algorithm is utilised. T
Lat. Am. j. solids struct.. Publicado em: 2017-03