Strength Of Materials
Mostrando 1-12 de 783 artigos, teses e dissertações.
-
1. Technological properties of a self-bloating clay and expanded-clay aggregate for the production of lightweight concrete
Abstract The global interest in an increasingly sustainable economy, with a reduction in the consumption of raw materials and energy, can be supported by the growth in the use of lightweight concrete (LC) produced with expanded-clay aggregates (EA). The main qualities of natural self-bloating clay for the production of EA were studied, analyzing the paramete
Cerâmica. Publicado em: 2023
-
2. Functional status of individuals with osteogenesis imperfecta: data from a reference center
Abstract Objective: To evaluate the functional status of individuals with Osteogenesis Imperfecta (OI) followed up at a reference center in the state of Bahia. Materials and methods: This is an observational, cross-sectional, descriptive study, which evaluated individuals with OI, based on a non-probabilistic sampling. To assess motor function, the Motor F
Jornal de Pediatria. Publicado em: 2023
-
3. Effects of plaster to water ratio on physical and mechanical properties of ceramic pieces produced by the slip casting process
Abstract In the slip casting process, the relationship between the amount of plaster and water used in the production of molds influences the production of ceramic materials, because the higher the water content in the mixture, the lower the mechanical strength of the mold and higher the water absorption rate. In order to evaluate the influence of the variat
Cerâmica. Publicado em: 2022
-
4. Proposal of a failure envelope for artificially cemented sand
Abstract Soils are particulate materials, which often stand out for their low shear strength. In most cases, this aspect justifies adapting the geotechnical project for this characteristic, which can be even more problematic in the case of soft sands, since it often occurs in superficial layers in various parts of the metropolitan region of Fortaleza. Theref
REM - International Engineering Journal. Publicado em: 2022
-
5. Development of a ceramic membrane for emulsion water-diesel treatment
Abstract The purpose of this study was the development of a low-cost ceramic tubular membrane, using inexpensive materials, namely natural clay, and graphite as a porogenic agent. Such a low-cost membrane can be used as filters or porous supports for the preparation of multilayer ceramic membranes. Extrusion was used as a shape-forming method for this purpos
Cerâmica. Publicado em: 2022
-
6. Physical-mechanical behavior of alkali-activated materials produced by the one-part method based on fly ash and rice husk ash
Abstract The study on the physical-mechanical properties of alkali-activated materials (AAM) produced by the ‘one-part’ method was carried out. For this, residues such as fly ash and rice husk ash (RHA) were used. The alkaline activator (NaOH) was calcined together with RHA for 2 h at 750 °C. Dry mixes were prepared by replacing fly ash with 10%, 20%, a
Cerâmica. Publicado em: 2022
-
7. Behavior of plaster with water-repellent additive under natural aging
Abstract This research evaluates the behavior of plaster with a water-repellent additive when submitted to a natural aging process. Casting plaster and silane/siloxane-based water-repellent were used as materials. The water/plaster ratio was set at 0.7 and the contents of 0.2% and 0.4% of water-repellent were used, in relation to the plaster mass. Plaster pa
Cerâmica. Publicado em: 2022
-
8. Evaluation of the use of blast furnace slag as an additive in mortars
Abstract Clinker is the raw material used in the manufacture of cement. However, this material is very harmful to the environment, since it is estimated that for every ton of clinker produced, about 1.0 ton of CO2 is released into the atmosphere. For this reason, alternatives were sought for the use of other materials that are less harmful to the environment
REM - International Engineering Journal. Publicado em: 2022
-
9. The influence of separately and combined bentonite and kaolinite as binders for pelletization of NaA zeolite from coal fly ash
Abstract Pelletization of zeolitic materials is required to facilitate their practical industrial and commercial applications. Zeolite-NaA was synthesized from fly ash by the fusion method and shaped into spherical granules. Bentonite, kaolinite, and a combination of bentonite with kaolinite were tested as binders with different contents from 5 to 10 wt%. Th
Cerâmica. Publicado em: 2022
-
10. Study of soils used with subgrade and sub-ballast in Brazilian railways
Abstract Brazil has an extremely limited railroad network compared to other developed and developing countries. There are projects to expand this mesh. Knowing that the cost of implementing a railroad is high, research for solutions that allow cost reduction is of great importance. But the parameters of the materials used in the subgrade and sub-ballast laye
REM - International Engineering Journal. Publicado em: 2022
-
11. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
12. FGF23 levels as a marker of physical performance and falls in community-dwelling very old individuals
ABSTRACT Objective: The fibroblast growth factor 23 (FGF23) has been related to biological aging, but data in elderly individuals are scant. We determined the profile of serum FGF23 levels in a population of very-old individuals and studied their correlations with parameters of bone metabolism and health markers, as functional performance. Materials and me
Archives of Endocrinology and Metabolism. Publicado em: 2022