Strength And Stiffness
Mostrando 13-24 de 195 artigos, teses e dissertações.
-
13. Experimental study of reinforced masonry beams
Resumo Com objetivo de contribuir com o melhor entendimento do comportamento de vigas de alvenaria estrutural armada, foi realizado o estudo experimental de vigas de alvenaria armada com blocos de concreto. Essas foram projetadas para ruptura à flexão, sendo analisando o modo de fissuração, a flecha, o momento fletor último, a deformação por encurtame
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
14. CHRONIC CONSUMPTION OF ALCOHOL ADVERSELY AFFECTS THE BONE OF YOUNG RATS
RESUMO Objetivo: Verificar a influência do consumo experimental crônico de álcool no crescimento longitudinal da tíbia e em parâmetros de qualidade óssea de ratos jovens. Métodos: Dez ratos controle receberam água, outros dez receberam álcool etílico nas concentrações estabelecidas no protocolo para indução. Após eutanásia, as amostras de s
Acta ortop. bras.. Publicado em: 04/11/2019
-
15. Evaluation of Dynamic Mechanical Properties of Fique Fabric/Epoxy Composites
The fique is a plant typical of the Colombian Andes, from which relatively common items are fabricated. One of these is woven fabric extensively applied in sackcloths. The mechanical strength of fique fabric have motivated recent investigations on possible reinforcement of polymer matrix composites. For this purpose its thermo-mechanical behavior was unveile
Mat. Res.. Publicado em: 14/10/2019
-
16. Phase Separation and Development of the Microstructure for Stainless Steel to Copper Alloy Weld Joints Using a Fiber Laser
ABSTRACT Stainless steel and copper alloys joints are often applied in aerospace, marine and power industries where both high thermal and electrical conductivity (Cu) and corrosion resistance (steel) are required. In the aerospace industry, in particular for the combustion chamber of rocket engines, copper and steel combinations offer perfect materials selec
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
17. Comparação biomecânica de CRIF e placa de reconstrução na estabilização de fraturas distais de fêmur em cães
RESUMO O presente estudo objetivou comparar, biomecanicamente, por meio do ensaio de compressão excêntrica, a resistência dos implantes Clamp and Rod Internal Fixation (CRIF) 5,0mm e placa de reconstrução 3,5mm na fixação de fraturas distais de fêmur de cão. Foram utilizados 22 fêmures de 11 cadáveres de cão entre 2 e 7 anos de idade e peso corpo
Arq. Bras. Med. Vet. Zootec.. Publicado em: 10/10/2019
-
18. Association of hand grip strength with disease activity, disability and quality of life in children and adolescents with Juvenile Idiopathic Arthritis
Abstract Background: Juvenile idiopathic arthritis (JIA) affects wrist and hand joints leading to decrease hand function and patients’ daily living activities. The assessment of hand grip strength (HGS) in children and adolescents with JIA is of major importance, and the association of HGS with JIA disease activity, disability and quality of life has not
Adv. rheumatol.. Publicado em: 29/07/2019
-
19. Inelastic second-order analysis of steel columns under minor-axis bending
Abstract The inelastic second-order behavior of steel structural columns under minor-axis bending is presented in this article. To study this behavior, a nonlinear frame element formulation is adopted in which the steel's plasticity process is accompanied at the nodal points of each finite element through the refined plastic-hinge method (RPHM). A tangent mo
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
20. Technological properties of particleboards produced using mixture of pines and bamboo
RESUMO: Este estudo tem por objetivo avaliar as propriedades tecnológicas de painéis de madeira produzidos com partículas de bambu da espécie Phyllostachysedulis, e do gênero tradicionalmente utilizado pelo setor para a produção dos painéis particulados no Brasil, o Pinus spp. As varas de bambu com três anos de idade foram coletadas em Frei Rogéri
Cienc. Rural. Publicado em: 13/06/2019
-
21. Strength and Stiffness of Cross Laminated Timber (CLT) panels produced with Pinus and Eucalyptus: experimental and analytical comparisons
ABSTRACT The CLT is a building material that comes mainly used in Europe where it was developed. Lightweight, sturdy and eco-friendly, this material has become one of the most important constructive methods in the world. CLT are panels formed by layers of wood glued to each other orthogonally, always in odd numbers, symmetrical with respect to the central la
Matéria (Rio J.). Publicado em: 10/06/2019
-
22. A Takagi-Sugeno fuzzy model for predicting the clean rock joints shear strength
Abstract It is well known that learning about the mechanical behavior of a fractured rock mass depends on the shear behavior of its discontinuities. Several studies have shown that the shear behavior of unfilled rock discontinuities depends on their boundary conditions, roughness characteristics and the properties of the joints walls. Currently, there are se
REM, Int. Eng. J.. Publicado em: 2019-06
-
23. Evaluation of the self-cemeting effect of Construction and Demotion Waste (CDW) on mechanical performance over time for pavement support layers purpose
Resumo O problema relacionado a geração de resíduos de construção civil (CDW) está diretamente associado à sua elevada geração e disposição irregular, sobretudo quando tais resíduos são dispostos em aterros sanitários. Desta forma, torna-se cada vez mais importante o incentivo do reaproveitamento deste material, sobretudo em obras de grande con
Ambient. constr.. Publicado em: 2019-04
-
24. Uso do diafragma externo na ligação entre viga de seção I e pilar tubular de seção circular
Resumo O diafragma externo na ligação entre viga metálica de seção I e pilar metálico tubular de seção circular tem por objetivo o aumento na eficácia da transferência dos esforços. A proposta é dar alternativas ao uso desse sistema estrutural, reduzindo a limitação imposta por sua simples ligação ao se adicionar esse elemento, similar a um a
Ambient. constr.. Publicado em: 2019-03