Stochastic Process
Mostrando 1-12 de 260 artigos, teses e dissertações.
-
1. Characterization of Otto Chips by Particle Swarm Optimization
Abstract Recently a surface plasmon resonance (SPR) optical sensor, based on the Otto configuration — the Otto chip — has been developed. One essential step in the quality control of the fabrication process is characterization of the active region of several devices in a batch. Characterization is done by measuring the angular spectrum of the optical re
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
2. Direct sequencing of blocks in stochastic models with multi-mines and multi-destinations
Abstract Mining Scheduling is the one that maximizes profit from mining over time. By means of computational methods, the deposit is discretized in blocks and algorithms are used to consummate this objective. The methods that are widely known nowadays for mining scheduling optimization of a discrete block model were based on graph theory, and among those mos
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
3. On the Global and Localised Corrosion Behaviour of the AA2524-T3 Aluminium Alloy Used as Aircraft Fuselage Skin
The aim of this work was to study the corrosion process of new aluminium alloy AA2524-T3 (Solution Heat Treated and Cold Worked), which is a promising substitute of the base line AA2024-T3 for aircrafts fabrication, by global and localised techniques in sodium chloride medium (0.05 mol L-1 NaCl). The open circuit potential results revealed a stochastic evolu
Mat. Res.. Publicado em: 14/01/2019
-
4. Analysis of a tuned liquid column damper in non-linear structures subjected to seismic excitations
Abstract The behavior of the tuned liquid column damper (TLCD) is analyzed in the control of non-linear structures subjected to random seismic excitations. The structure is modeled as a system of one degree of freedom with incursion in the non-linear range. The Bouc-Wen hysteretic model is used to model the non-linear behavior of the structure. A stationary
Lat. Am. j. solids struct.. Publicado em: 19/07/2018
-
5. Classical and stochastic mine planning techniques, state of the art and trends
Abstract Determination of the best possible ultimate pit for an open pit mine is a fundamental subject that has undergone a highly evolutionary process, reviewed in this study, since the correct choice carries substantial economic impact for the industry. The correct choice can be very beneficial for project analysis, whereas an incorrect choice has the pote
REM, Int. Eng. J.. Publicado em: 2018-04
-
6. A Stochastic Reliability Model for Application in a Multidisciplinary Optimization of a Low Pressure Turbine Blade Made of Titanium Aluminide
Abstract Currently, there are a lot of research activities dealing with gamma titanium aluminide (γ-TiAl) alloys as new materials for low pressure turbine (LPT) blades. Even though the scatter in mechanical properties of such intermetallic alloys is more distinctive as in conventional metallic alloys, stochastic investigations on γ -TiAl alloys are very ra
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
7. Uncertainty analysis of a flexible rotor supported by fluid film bearings
AbstractThis paper is dedicated to the analyses of the effect of uncertain parameters on the dynamic behavior of a flexible rotor containing two rigid discs and supported by two fluid film bearings. A stochastic method has been extensively used to model uncertain parameters, i.e., the so-called Monte Carlo simulation. However, in the present contribution, th
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
8. Evaluating the influence of defects on the young's modulus of carbon nanotubes using stochastic modeling
The main goal of this research is to investigate the influence of structural defects on the mechanical properties of single-walled carbon nanotubes (CNTs). Two different types of the structural defects called Stone-Wales and vacancy defect are studied. While the former is categorized under the process-induced defect and it appears during the growth process o
Mat. Res.. Publicado em: 30/05/2014
-
9. Opciones reales en la determinación de la óptima edad de cosecha para dos manejos
It was studied Real Options approach as a financial-economic tool for strategic decision-making in the determination of optimal harvesting age in two kinds of forestry exploitation, a high-value one and a pulp-producing unit. It is assumed that the projection of selling prices of the byproducts follows a Brownian geometric stochastic process, while productio
CERNE. Publicado em: 2014-03
-
10. Determination of the carbon market incremental payoff considering a stochastic jump-diffusion process
The objective of this paper is to verify the robustness of the Least Square Monte Carlo and Grant, Vora & Weeks methods when used to determine the incremental payoff of the carbon market for renewable electricity generation projects, considering that the behavior of the price of Certified Emission Reductions, otherwise known as Carbon Credits, may be modeled
Pesqui. Oper.. Publicado em: 2013-12
-
11. Decomposition approach for generation and transmission expansion planning with implicit multipliers evaluation
In an electric power systems planning framework, decomposition techniques are usually applied to separate investment and operation subproblems to take benefits from the use of independent solution algorithms. Real power systems planning problems can be rather complex and their detailed representation often leads to greater effort to solve the operation subpr
Pesqui. Oper.. Publicado em: 08/11/2013
-
12. Uma abordagem estocástica baseada em aprendizagem por reforço para modelagem automática e dinâmica de estilos de aprendizagem de estudantes em sistemas adaptativos e inteligentes para educação a distância
An important feature in Distance Education is the personal and intelligent assistance, in which an important aspect is that students may have quite different profiles. Thus, a course designed for a particular student may not be suitable for other students. Because of this, a challenge in research is the development of advanced educational applications that p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/09/2012