Stiffened Plates
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. Crashworthiness Performance of Stiffened Foam-filled Tapered Structures under Axial and Oblique Dynamic Loads
Abstract This paper aims to explore crashworthiness performance of new designed foam-filled tapered structures under axial and oblique impact load conditions. The structures consisted of inner and outer tapered tubes connected together by four stiffening plates. They also included square, hexagonal, octagonal, decagonal and circular cross-sectional shapes w
Lat. Am. j. solids struct.. Publicado em: 28/06/2018
-
2. Numerical analysis of truss systems with stiffened flattened end-bars
Abstract Circular hollow sections are usually used in long-span roof truss systems. One of the typology for connecting elements in such structures involves the flattening of bar ends. This article presents the numerical analysis of a plane truss composed of circular hollow sections, in which diagonal bars have flattened ends. In this sense, a new flattening
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
3. Effects of Partial Edge Loading and Fibre Configuration on Vibration and Buckling Characteristics of Stiffened Composite Plates
Abstract In this work, the influence of uniaxial and biaxial partial edge loads on buckling and vibration characteristics of stiffened laminated plates is examined by using finite element method. As the initial pre-buckling stress distributions within an element are highly non-uniform in nature for a given loading and edge conditions, the critical loads are
Lat. Am. j. solids struct.. Publicado em: 2016-05
-
4. Ultimate Strength of Continuous Stiffened Aluminium Plates Under Combined Biaxial Compression and Lateral Pressure
Abstract Ultimate compressive strength of welded stiffened aluminium plates under combined biaxial in-plane compression and different levels of lateral pressure is assessed herein. A numerical database of the ultimate strengths for stiffened aluminium plates is generated at first. Then, regression analysis is applied in order to derive the empirical formulat
Lat. Am. j. solids struct.. Publicado em: 2015-09
-
5. Numerical dynamic analysis of stiffened plates under blast loading
Using the general purpose finite element package Abaqus, an investigation has been carried out to examine the dynamic response of steel stiffened plates subjected to uniform blast loading. The main objective of this study is to determine the dynamic response of the stiffened plates considering the effect of stiffener configurations. Several parameters, such
Lat. Am. j. solids struct.. Publicado em: 2014-03
-
6. Parametric study on average stress-average strain curve of composite stiffened plates using progressive failure method
The post-buckling behavior of composite ships' stiffened plate panels has been studied. In this study, the average strain- average stress curves for these panels are derived using progressive failure method as well as nonlinear finite element method. The boundary conditions are appropriate for the continuous plate panels used in shipbuilding. The effects of
Lat. Am. j. solids struct.. Publicado em: 2014
-
7. Creep-age forming of AA7475 aluminum panels for aircraft lower wing skin application
Creep-age forming (CAF) is an interesting process for the airframe industry, as it is able to form or shape panels into smooth, but complex, curvatures. In the CAF process, the ageing cycle of the alloy is used to relax external loads imposed to the part, through creep mechanisms. Those relaxed stresses impose a new curvature to the part. At the end of the p
Materials Research. Publicado em: 17/07/2012
-
8. Vibration analysis of stiffened plates using finite element method
This paper presents the vibration analysis of stiffened plates, using both conventional and super finite element methods. Mindlin plate and Timoshenko beam theories are utilized so as to formulate the plate and stiffeners, respectively. Eccentricity of the stiffeners is considered and they are not limited to be placed on nodal lines. Therefore, any configura
Latin American Journal of Solids and Structures. Publicado em: 2012
-
9. Degradation of the compressive strength of unstiffened/stiffened steel plates due to both-sides randomly distributed corrosion wastage
The paper addresses the problem of the influence of randomly distributed corrosion wastage on the collapse strength and behaviour of unstiffened/stiffened steel plates in longitudinal compression. A series of elastic-plastic large deflection finite element analyses is performed on both-sides randomly corroded steel plates and stiffened plates. The effects of
Latin American Journal of Solids and Structures. Publicado em: 2010-09
-
10. A numerical investigation into the effects of parabolic curvature on the buckling strength and behaviour of stiffened plates under in-plane compression
The main targets of this research are mainly divided in to two parts: (1) identifying the effects of parabolic curvature on the buckling strength and behaviour of stiffened plates under in-plane compression, (2) generating practical graphs for extracting eigenvalue buckling stress of parabolic curved stiffened plate to dimensionless parameters. A parametric
Latin American Journal of Solids and Structures. Publicado em: 2010-09
-
11. Contribuição ao estudo de painéis reforçados: comparação entre o método da chapa ortotrópica e o método dos elementos finitos. / Contribution to the study of reinforced panels: comparison between orthotropic plate method and the finite element method.
Métodos convencionais, tais como o método da chapa ortotrópica, têm sido aplicados por muitos anos no estudo de painéis reforçados pela sua simplicidade e facilidade de aplicação na determinação de tensões agentes nas fases iniciais da espiral projeto. Não estão disponíveis na literatura, porém, análises comparativas do método da chapa ortot
Publicado em: 2008
-
12. Análise não linear física de placas e cascas anisotrópicas laminadas acopladas ou não com meio contínuo tridimensional viscoelástico através da combinação entre o MEC e o MEF / Physical non-linear analysis of anisotropic laminated plates and shells coupled or not with three-dimensional viscoelastic medium by BEM/FEM coupling
This work presents an anisotropic laminated stiffened shell formulation, considering physical non-linearity with non-associative law, coupled to viscoelastic three-dimensional continuum medium. Plane triangular finite elements with cubic approximation for nodal variables are developed to model the shell. Bar elements with the same approximation are derived f
Publicado em: 2004