Step Motors
Mostrando 1-12 de 30 artigos, teses e dissertações.
-
1. Application of methodology for the adequacy of the electrical motor's power sizing: permanent and transient analysis
Abstract The suitability of the motive force contributes to the efficient use of electrical energy. On the other hand, the inadequate size of electric motors is directly connected to increased investment and running costs. This article presents the theory and mainly the application of a methodology for the adequacy of the motive power. The research was condu
REM, Int. Eng. J.. Publicado em: 2018-04
-
2. STEPPER MOTOR CONTROL APPLIED TO A ROBOTIC MANIPULATOR / CONTROLE DE MOTORES DE PASSO APLICADO A UM MANIPULADOR ROBÓTICO
Motores de passo são os motores mais utilizados em aplicações de controle de posicionamento em malha aberta. Entretanto, as limitações desta forma de atuação têm fomentado o desenvolvimento de novas técnicas que incorporem o controle em malha fechada. Motores de passo possuem boa relação entre torque e custo, tornando-os atraentes para aplicaçõe
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/04/2012
-
3. Algoritmo para frenagem regenerativa de uma máquina síncrona de imã permanente / Algorithm for regenerative braking of a permanent magnet synchronous machine
Environmental protection and optimal energy resources are great activity research areas. As a result of these researches, electric vehicles (EVs) and hybrid (HEV) developments have been accelerated. They have challenging problems such as low autonomy, power conversion, vehicle control, energy management and distribution within it, as well as the esthetic and
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/08/2010
-
4. Controlador Fuzzy aplicado a um sistema de controle de posição acionador por motores de indução trifásicos / Fuzzy controller applied to a position control system powered by tree-phases induction motors.
This work presents the project of fuzzy controllers for a X-Y coordinate table with two degrees of freedom. Both bases of the table moves horizontally, powered by tree-phases induction motors operated by frequency inverts. For detection position of bases, optical encoders were engaged to the axes of the engines to be obtained the angular displacement. A data
Publicado em: 2010
-
5. Avaliação da influência dos parâmetros do processo de soldagem TIG sobre a qualidade de uma peça fabricada em aço elétrico silicioso / Influence of TIG welding process parameters on the quality of a piece fabricated with silicon electrical steel
The TIG welding process (Tungsten Inert Gas), also known as GTAW (Gas Tungsten ArcWelding), is the most commonly used process for welding of thin plates where there is a need for an excellent control of the temperature applied on the piece. This paper presents a study carried out in partnership between the Department of Graduate Studies in Scienceand Materia
Publicado em: 2010
-
6. Autoamostrador de baixo custo para análise por injeção em fluxo
This paper describes a homemade autosampler for flow injection analysis (FIA), constructed with two step motors from old floppy disk drives (5¼-inch). The autosampler was connected to a computer through the parallel port and the sampling process was controlled by software in Quick Basic. The performance of the system was assessed by the determination of amm
Química Nova. Publicado em: 2009
-
7. Identificação de parâmetros de motor de indução linear tubular para extração de petróleo. / Identification of parameters of the tubular linear induction motor for the extraction of oil.
This work presents the identification of parameters of the tubular linear induction motor for the extraction of oil, called MATÆOS - which is the Portuguese acronym for Asynchronous Tubular Motor for Application to Subterranean Oil Extraction. The first step to the identification of the motor parameters was the implementation of the supervisory and control
Publicado em: 2008
-
8. THE RESEARCH AND DEVELOPMENT OF AN DRIVER FOR STEP MOTOR OPERATING IN LOW TENSION / PESQUISA E DESENVOLVIMENTO DE UM ACIONAMENTO PARA MOTOR DE PASSO OPERANDO EM BAIXA TENSÃO
The research and development of an driver for step motor operating in low tension presents the development of a chopper driver intended to drive 2- phase step motors. The driver was designed to operate between 12 and 18 V which makes it very attractive for automations in vehicles and robots which carry their own batteries. Contrary to the usual design, where
Publicado em: 2005
-
9. ANÁLISE E DESENVOLVIMENTO DE UM MANIPULADOR ROBÓTICO PARA ARMAZENAMENTO DE VOLUMES PADRONIZADOS / ANALYSIS AND DEVELOPMENT OF AN ROBOTIC MANIPULATOR TO STORAGE OF STANDARDIZED CONTAINERS
A great part of the industry and of the wholesaler and retailer commerce sector, is dealing with some problems related to the storage of their products in sheds. The development of this prototype was initiated in order to improve the products (books, medicines, CDs, boxes, pallets) storage / recovery operations and the use of the vacant spaces. This developm
Publicado em: 2002
-
10. Teoria de sistemas vibratorios aporticados não-lineares e não-ideais
This work concerns the computational and analytical study of the non-linear dynamic behavior of a portal frame, excited by a non-ideal source - an unbalanced direct current electric motor of limited power. A problem whose mathematical model represents a simplified system (the characteristic of the motor in stationary state) and complete (the electric equatio
Publicado em: 2002
-
11. DEVELOPMENT AND TESTS OF A MICROSTEPPING ACTUATION USING TWO DISTINCT TECHNOLOGIES / DESENVOLVIMENTO E TESTES DE UM ACIONAMENTO EM MICROPASSO UTILIZANDO DUAS TECNOLOGIAS DISTINTAS
Este trabalho apresenta o desenvolvimento e testes de um sistema de acionamento de motores de passo em nível de micropasso, utilizando duas tecnologias distintas. A crescente capacidade de regulação e a possibilidade de chaveamentos precisos das correntes de fase dos motores de passo têm possibilitado o surgimento de acionamentos em micropasso cada vez m
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/04/2000
-
12. ANALYSIS AND EXPERIMENTAL DEVELOPMENT OF A PLATE IN MICROSTEPPING DRIVE / ANÁLISE E DESENVOLVIMENTO EXPERIMENTAL DE UMA PLACA DE ACIONAMENTO EM MICROPASSO
O presente trabalho consiste no desenvolvimento de um sistema para controle de motores de passo em nível de micropasso. Embora a perfomance obtida com os acionamentos convencionais em passo inteiro e meio passo seja satisfatória para muitas aplicações, há um certo número de problemas intrínsecos na operação sob esta forma de acionamento que impedem
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/04/1997