Steel Making
Mostrando 1-12 de 59 artigos, teses e dissertações.
-
1. Análise da geração de energia elétrica por meio da utilização de conversores do tipo TEG em lingotamento contínuo de aços
RESUMO A fabricação do aço é um processo que requer enormes quantidades de recursos, como por exemplo combustíveis, minério de ferro, carvão, entre outros. Com a crescente preocupação com o meio ambiente, seja pelas cargas ambientais ou pelo aquecimento global, cresce também a necessidade do desenvolvimento de novas tecnologias que possibilitem um
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Productivity and Superficial Quality of an Aspherical Die Using CAD/CAM
ABSTRACT Nowadays, it is hard to imagine modern industry without the manufacturing and design software aided by computer, known as CAD/CAM, once the search for excellence in complex geometry parts, reduced time, quality assurance and interchangeability is increasing. Within this quest, the CAD/CAM platform has become a significant factor in manufacturing, es
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Impacto do BNDES na eficiência da indústria siderúrgica: aplicação do modelo Malmquist de dois estágios
Resumo Utilizando o modelo Malmquist de análise envoltória de dados (Data Envelopment Analysis - DEA) de dois estágios, este artigo busca avaliar como o Banco Nacional de Desenvolvimento Econômico e Social (BNDES) impacta o desempenho da indústria siderúrgica. Para tanto, são conduzidas a decomposição do índice de Malmquist e a regressão não line
Cad. EBAPE.BR. Publicado em: 30/05/2019
-
4. Use of electric arc furnace slag for producing concrete paving blocks
Resumo A escória de forno elétrico foi usada como substituto do agregado graúdo natural na produção de peças de pavimentação de concreto. O traço de concreto 1:2:3:0,51 (cimento:areia:agregado graúdo:água) foi definido para alcançar uma resistência à compressão de 35 MPa. Quatro grupos de concreto foram preparados: um traço referência e trê
Ambient. constr.. Publicado em: 2019-04
-
5. Estudio de la microestructura de un cordón de soldadura de un acero P91 mediante microscopía electrónica de transmisión
ABSTRACT In the present work the microstructural characterization of a single-pass weld of 9Cr1MoVNb P91 steel performed by the flux-cored arc welding (FCAW) process in the “as welding” condition has been carried out by means of transmission electron microscopy. P91 steel offers a good weldability, but the mechanical properties of the welded joints are f
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Interfacial Shear Stress with Pull-out Test at Zeolite Ceramic Matrix and SS316 Single Fiber
ABSTRACT Natural zeolite ceramic is a material that can be used as bioceramics but it is fragile to crack. The weakness of ceramics can be overcome by making ceramic metals. The use of SS316 (stainless steel 316) fiber to strengthen the zeolite ceramic had been done in order to determine the interfacial relationship by using a fiber pull-out test. The conten
Matéria (Rio J.). Publicado em: 05/03/2018
-
7. The Effect of Electroless Bath Parameters and Heat Treatment on the Properties of Ni-P and Ni-P-Cu Composite Coatings
Ni-P-(Cu) composite coatings were applied on a St37 steel in an acidic bath of hypophosphite composite. The effect of the concentration of the Cu particles and pH of the solutionon the amount of Ni and P of the coatings, their morphology, and hardness of the coatings were explored. Some of the coated samples were also heat treated at 400ºC for 1 hour. The p
Mat. Res.. Publicado em: 08/01/2018
-
8. AC Induced Corrosion of Underground Steel Pipelines under Cathodic Protection: III. Theoretical Approach with Electrolyte Resistance and Double Layer Capacitance for Mixed Corrosion Kinetics
In this series of papers, AC induced corrosion of steel pipe under cathodic protection was investigated. In this Part III, the most realistic model was devised, i.e., the cathodic current was composed of the reductions of dissolved oxygen partly controlled by diffusion and of the water following the Tafel law. The cathodic protection potential necessary to m
J. Braz. Chem. Soc.. Publicado em: 2017-08
-
9. Analysis of reverse heat transfer for conventional and optimized lubri-cooling methods during tangential surface grinding of ABNT 1020 steel
Abstract A numerical thermal model was developed to evaluate the heat flux which is conducted to a rectangular workpiece of steel plate ABNT 1020, thus making it possible to compute the maximum temperature in the grinding surface, taking into account the rectangular distribution of heat flux, the thermal properties of the grinding wheel conventional Al2O3, t
REM, Int. Eng. J.. Publicado em: 2016-12
-
10. DLC Films Grown On Steel Using An Innovator Active Screen System For PECVD Technique
In this work, an active screen plasma discharge system based technology was incorporated in a PECVD reactor for DLC films growth, making it a new development in DLC films deposition. In this case, the active screen system is used to seek better electrons confinement, which might result in high ions density due to the collisions number increase, leading to a
Mat. Res.. Publicado em: 07/07/2016
-
11. Characterization of Metallurgical Coke Produced with Coal Mixtures and Waste Tires
The use of scrap tires in the coal blends is an alternative to reduction of coke production costs as well as mitigates the impact caused by tire accumulation in the environment. Tests were carried out on a pilot scale, with coal blends and waste tire in 4 levels and 3 particle sizes, in order to assess the impact on the produced coke quality, especially on t
Mat. Res.. Publicado em: 03/05/2016
-
12. Numerical Predictions for the Thermal History, Microstructure and Hardness Distributions at the HAZ during Welding of Low Alloy Steels
A phenomenological model to predict the multiphase diffusional decomposition of the austenite in low-alloy hypoeutectoid steels was adapted for welding conditions. The kinetics of phase transformations coupled with the heat transfer phenomena was numerically implemented using the Finite Volume Method (FVM) in a computational code. The model was applied to si
Mat. Res.. Publicado em: 05/04/2016