Steel Fracture
Mostrando 13-24 de 133 artigos, teses e dissertações.
-
13. Effect of Hot Deformation on Microstructure, Hardness and Precipitation Kinetics in a C350 Maraging Steel Modified by Titanium Addition
Maraging steels are alloys with a good balance between strength and fracture toughness. These properties are obtained by quenching and aging treatments, where the precipitation of intermetallic compounds is promoted in a martensitic matrix. In this context, this paper aims to evaluate the effect of hot deformation on microstructure, kinetics and formation of
Mat. Res.. Publicado em: 17/09/2018
-
14. Influencia del tiempo de revenido a 780°C sobre la resistencia al creep del acero ASTM A335 P91
ABSTRACT It has been investigated the effect of tempering time at 780°C on the creep strength of ASTM A335 grade P91 steel. The tempering temperature corresponded to the industrial tempering temperature and the times evaluated were chosen in such a way to accumulate, between the tempering prior as received (40 min) and the treatment carried out in the labor
Matéria (Rio J.). Publicado em: 19/07/2018
-
15. Optimización del proceso RSW para acero DP 1000
ABSTRACT In recent times new materials have been introduced in automobiles construction in order to reduce their weight and consequently fuel consumption and emissions level. Among them are Dual Phase (DP) steels, constituted by a ferritic matrix with martensite islands. Resistance Spot Welding (RSW) is the most commonly used welding process in the automotiv
Matéria (Rio J.). Publicado em: 19/07/2018
-
16. Extensión de durabilidad de pistones de bombas de fractura hidráulica mediante el empleo de tecnología de nitruración por plasma y PVD
ABSTRACT Hydraulic stimulation technique consists of "fracturing" the formation (rock reservoirs) through pumping a fracturing fluid downhole. This operation is performed by using hydraulic fracturing pumps. The pistons of these pumps are mechanical components performing the intake and compressing fracture fluid by reciprocating action. During this alternati
Matéria (Rio J.). Publicado em: 19/07/2018
-
17. Structural Behavior of RC Beams Containing a Pre- Diagonal Tension Crack
Abstract This study focuses the light on the shear behavior of pre-cracked beams, and examines the feasibility of applying fracture mechanics concepts to widen the understanding of shear behavior and mechanisms. The experimental program contains ten beam specimens of high strength concrete (HSC) and steel fiber reinforced concrete (SFRC). Pre-cracks were emb
Lat. Am. j. solids struct.. Publicado em: 16/07/2018
-
18. Creep Fracture Mechanisms and Maps in Aisi Type 316 Austenitic Stainless Steels from Distinct Origins
Two distinct AISI type 316 stainless steels, of Brazilian and Swedish origins, were compared regarding their creep fracture mechanisms at 600, 700 and 800°C. The possible mechanisms associated with the creep fracture strength were identified by means of fracture maps proposed either by Ashby and collaborators or by Miller and Langdon. Experimental creep res
Mat. Res.. Publicado em: 01/03/2018
-
19. Mechanical and Metallurgical Characterization of Laser Welding on P91 Ferritic Steel and Incoloy 800HT Dissimilar Joints
In this work, microstructural characterization and mechanical properties of P91 and Incoloy 800HT dissimilar laser beam welded joint were analyzed. In addition to that, metallographical studies were conducted using Optical microscopy, Scanning electron microscopy (SEM) equipped with Energy-dispersive X-ray spectroscopy (EDX) and X-Ray diffraction analysis (
Mat. Res.. Publicado em: 01/02/2018
-
20. In Situ Synchrotron Radiation Measurements During Axial Strain In Hydrogen Cathodically Charged Duplex Stainless Steel SAF 2205
The objective of this work is the evaluation of hydrogen effects on the martensitic transformation and strain hardening in Duplex Stainless Steels (DSS) SAF 2205 (UNS S32205/S31803). DSS are two-phase alloys (austenite and ferrite), which are used for applications requiring high mechanical strength, in corrosive environments. Therefore, it is necessary a bet
Mat. Res.. Publicado em: 18/12/2017
-
21. Characterization of Impact Toughness Properties of DIN39MnCrB6-2 Steel Grade
Boron added steels in quenched and tempered condition have been widely used in applications where good mechanical properties and low cost are required. In this study, impact resistance of DIN 39MnCrB6-2 steel grade was investigated due to its criticality in automotive components. Metastable phase diagrams were built to guide heat treatments. The influence he
Mat. Res.. Publicado em: 04/12/2017
-
22. Fracture Modes of AISI Type 302 Stainless Steel Under Metastable Plastic Deformation
Martensitic transformation can be induced by plastic deformation in metastable iron-based alloys, such as stainless steels containing limited amounts of C, Ni and Cr. This transformation takes place at the temperature range from Ms and Md, usually at relatively lower temperature values. The transformed martensite has been associated with maximum ultimate str
Mat. Res.. Publicado em: 09/11/2017
-
23. Effect of Boride Layer on PM HSS AISI M2 on the Mechanisms Acting in the Transverse Rupture Strength Test
Herein, it was conducted a study in order to examine the main fracture characteristics in the transverse rupture strength test (TRS) of a high speed steel (HSS) AISI M2 produced by powder metallurgy (PM) and with boriding treatment. Four conditions have been studied: as-sintered, borided, normalized and borided + TiN. The TRS tests were conducted in accordan
Mat. Res.. Publicado em: 06/11/2017
-
24. Nandrolone decanoate appears to increase bone callus formation in young adult rats after a complete femoral fracture
Abstract Purpose: To evaluate the influence of nandrolone decanoate on fracture healing and bone quality in normal rats. Methods: Male rats were assigned to four groups (n=28/group): Control group consisting of animals without any intervention, Nandrolone decanoate (DN) group consisting of animals that received intramuscular injection of nandrolone decano
Acta Cir. Bras.. Publicado em: 2017-11