Stabilized Zirconia
Mostrando 13-24 de 48 artigos, teses e dissertações.
-
13. Synthesis by coprecipitation of india-stabilized zirconia and codoping with MoO3, WO3, TaO2.5, or NbO2.5 for application as thermal barrier coatings
Coprecipitation synthesis of nanocrystalline india-stabilized zirconia with high surface area and codoping with MoO3, WO3, TaO2.5, or NbO2.5 is reported. The concentration of codopants was defined by the charge-compensating mechanism. Ethanol washing followed by azeotropic distillation and freeze drying were compared as dehydration techniques for the gels. A
Mat. Res.. Publicado em: 05/02/2016
-
14. Compatibility analyses of BICUVOX.10 as a cathode in yttria-stabilized zirconia electrolytes for usage in solid oxide fuel cells
Copper-substituted bismuth vanadate has been considered a promising material for composite cathodes in SOFC. However, high reactivity of BICUVOX.10 towards the electrolytes still has been its greatest shortcoming. This paper describes reactions between BICUVOX.10 and yttria-stabilized zirconia (YSZ) electrolytes. Secondary phases formed were evaluated by X-r
Mat. Res.. Publicado em: 30/09/2014
-
15. Study on nano-structured hydroxyapatite/zirconia stabilized yttria on healing of articular cartilage defect in rabbit
PURPOSE: Articular Cartilage has limited potential for self-repair and tissue engineering approaches attempt to repair articular cartilage by scaffolds. We hypothesized that the combined hydroxyapatite and zirconia stabilized yttria would enhance the quality of cartilage healing. METHODS: In ten New Zealand white rabbits bilateral full-thickness osteochondra
Acta Cir. Bras.. Publicado em: 2013-05
-
16. Yttria and ceria doped zirconia thin films grown by pulsed laser deposition
The Yttria stabilized Zirconia (YSZ) is a standard electrolyte for solid oxide fuel cells (SOFCs), which are potential candidates for next generation portable and mobile power sources. YSZ electrolyte thin films having a cubic single phase allow reducing the SOFC operating temperature without diminishing the electrochemical power density. Films of 8 mol% Ytt
Mat. Res.. Publicado em: 16/04/2013
-
17. Parâmetros de monitoramento na produção industrial de componentes em zircônia parcialmente estabilizada com óxido de magnésio / Monitoring parameters for the industrial production of pieces made of magnesia-partially-stabilized zirconia
Zirconia has been widely applied on production of structural components, mainly due to its great mechanical properties. However, these properties are associated to the zirconia tetragonal and cubic phases, which are stable only on high temperatures on pure material, being necessary doping the material with some oxides to keep these phases at ambient temperat
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/02/2012
-
18. Internal fit of two all-ceramic systems and metal-ceramic crowns
OBJECTIVES: The aim of this study was to investigate the internal fit (IF) of glass-infiltrated alumina (ICA - In-Ceram Alumina), yttria-stabilized tetragonal zirconia polycrystals (Y-TZP - IPS e.max ZirCAD), and metal-ceramic (MC - Ni-Cr alloy) crowns. MATERIAL AND METHODS: Sixty standardized resin-tooth replicas of a maxillary first molar were produced for
Journal of Applied Oral Science. Publicado em: 2012-04
-
19. Síntese, caracterização microestrutural e elétrica de compostos cerâmicos à base de soluções sólidas de titanato de estrôncio, titanato de cálcio e óxido de ferro / Synthesis, microstructural and electrical characterization of ceramic compounds based on strontium and calcium titanates and iron-oxide
CaxSr1-xTi1-yFeyO3-δ, x = 0, 0.5 and 1.0, y = 0 and 0.35, ceramic compounds were synthesized by reactive solid state synthesis of CaCO3, SrCO3, TiO2 and Fe2O3, and by the polymeric precursor technique. The ceramic powders were evaluated by thermogravimetry and differential thermal analysis, X-ray diffraction and scanning electron microscopy. Sintered c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/09/2011
-
20. Bond strenght between resin cements and zirconia / Resistência de união entre cimentos resinosos e zircônia
The aim of this study was to evaluate the shear bond strength of resin cements to the yttria stabilized tetragonal zirconia (NobelProceraTM Zirconia) subjected to mechanical and chemical surface treatments. The cements used were: a self-etching resin cement with chemical polymerization Multilink (Ivoclar - Vivadent) associated to the Metal / Zirconia Primer
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/08/2011
-
21. Efeito do envelhecimento por ciclagem mecânica sobre a resistência à flexão de cerâmicas odontológicas / Effect of aging by mechanical cycling on the flexural strength of dental ceramics
The objectives of this study were: 1) To evaluate the effect of aging by mechanical cycling (1 million cycles at a frequency of 2 Hz) on the biaxial flexural strength of three dental ceramics used as framework materials for fixed partial dentures (FPDs): a) yttria partially stabilized zirconia tetragonal polycrystals (Y-TZP), b) alumina polycrystals (AL) and
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/07/2011
-
22. Propriedades mecânicas de cerâmicas de zircônia tetragonal policristalina contendo ítrio (Y-TZP) após aplicação de cerâmica / Mechanical properties of different stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramics after veneering with ceramic
Objetivo: Quantificar e comparar propriedades mecânicas, tais como resistência ao cisalhamento da interface de aderência zircônia/cerâmica, microdureza e resistência à flexão de corpos-de-prova confeccionados com diferentes cerâmicas de zircônia tetragonal policristalina contendo ítrio (Y-TZP) e cerâmica de revestimento aplicada. Método: Foram c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/04/2010
-
23. Efeitos da adição do NiO na densificação, na microestrutura e na condutividade elétrica da zircônia totalmente estabilizada com ítría / Effects of NiO addition on the densification, microstructure and electrical conductivity of yttria fully-stabilized zirconia
Os efeitos decorrentes da adição de NiO na densificação, na microestrutura e na condutividade elétrica da zircônia totalmente estabilizada com ítria foram sistematicamente estudados. Zircônia-8% mol de ítria (8YSZ) comercial e acetato, trihidróxi-carbonato, nitrato e óxido de níquel foram utilizados como materiais de partida. Os teores de Ni vari
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/02/2010
-
24. Síntese, processamento e caracterização das meia-células de óxido sólido catodo/eletrólito de manganito de lantânio dopado com estrôncio/zircônia estabilizada com ítria / Synthesis, processing and characterization of the solid oxide half-cells cathode/electrolyte of strontium-doped lanthanum manganite/yttria-stabilized zirconia
Os filmes cerâmicos de manganito de lantânio dopado com estrôncio (LSM) e de manganito de lantânio dopado com estrôncio/zircônia estabilizada com ítria (LSM/YSZ) são utilizados como catodos das células a combustível de óxido sólido de temperatura alta (CaCOSTA). Estes filmes cerâmicos porosos foram depositados sobre o substrato cerâmico denso d
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/02/2010