Squeeze Casting
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Effect of Squeeze Casting on Microhardness and Microstructure of Al-3Cu-xSi Alloy
Aluminum alloys of the ANSI series 319 present Si and Cu as the main alloying elements and the mechanical strength of these alloys can be improved by the precipitation of the metastable Al2Cu phase. Squeeze Casting is a casting process in which the cast metal is deposited in a metal mold and solidified under certain pressure exerted by a punch. This process
Mat. Res.. Publicado em: 30/09/2019
-
2. Rheo-Squeeze Casting of High-Silicon Aluminium Alloy Pipes with Gradient Structures and Their Mechanical Properties
Three different compositions of high-Si Al alloy pipe, with a gradient structure, were produced through semi-solid rheological squeeze casting, the microstructural characteristics of which were investigated. The mechanism of gradient structure formation and the effect of acicular Fe-rich phases on liquid segregation were revealed. Meanwhile, the crystal stru
Mat. Res.. Publicado em: 11/06/2018
-
3. Modelling and Optimization for Heat Treatment of Al-Si-Mg Alloy Prepared by Indirect Squeeze Casting Based on Response Surface Methodology
The purpose of the present study is to model and analyze heat treatment process of Al-Si-Mg alloy prepared by indirect squeeze casting. The combined effects of whole heat treatment process, including solution treatment temperature, solution treatment time, ageing temperature and ageing time, on Vickers hardness, were investigated. The non-linear mathematical
Mat. Res.. Publicado em: 20/07/2017
-
4. Investigation on the Wear Behaviour of Eutectic Al-Si Alloy- Al2O3 - Graphite Composites Fabricated Through Squeeze Casting
Dry sliding wear test was conducted on Al -Si alloy - Al2O3 - Graphite composites which are fabricated through squeeze casting method, using pin -on -disc wear testing rig. The influence of parameters such as applied load, sliding velocity and weight percentage of graphite, on the wear loss of Al- 5 wt. % Al2O3 - Graphite hybrid composite was investigated th
Mat. Res.. Publicado em: 27/06/2014
-
5. Método multicriterial para seleção de processos de fundição de metais
O objetivo principal da tese foi desenvolver um método multicriterial de seleção de processos de fundição de metais (MMSPF) para fabricação de componentes, considerando-se critérios técnicos, ambientais e econômicos para ser aplicado nas fases iniciais do desenvolvimento do componente. O MMSPF é constituído pelos módulos de seleção técnica e
Publicado em: 2011
-
6. Preparação e caracterização de materiais compósitos SiC/caulim/Al via "squeeze-casting"
Na busca de materiais com propriedades diferenciadas, vem aumentando nos últimos anos as pesquisas em materiais compósitos. Um dos importantes métodos de fabricação destes compósitos é o processo de infiltração sob pressão de metal fundido denominado "squeeze-casting". Este processo oferece algumas vantagens, tais como facilidade de produzir o comp
Cerâmica. Publicado em: 2009-09
-
7. Influência de cargas de talco nas propriedades microestruturais e mecânicas na matriz de carbetos de silício em compósitos de matriz cerâmica
Ceramic Matrix Composites (CMC) are the most recent materials in field composites. The main factors for the good acting of these materials are the choice: of the matrix material, of the reinforcement, of the processing and chemical composition. Ceramic materials possess elastic module very loud, low density, and can support temperatures very discharges, even
Publicado em: 2007
-
8. INFLUENCE OF KAOLIN CAMPO ALEGRE CONCENTRATION ON THE PHYSICAL AND MECHANICAL PROPERTIES OF SILICON CARBIDE/ALUMINUM COMPOSITES / INFLUÊNCIA DA CONCENTRAÇÃO DE CAULIM CAMPO ALEGRE NAS PROPRIEDADES FÍSICAS E MECÂNICAS DE COMPÓSITOS DE CARBETO DE SILÍCIO/ALUMÍNIO
O processo de infiltração de cerâmicas por metal fundido é uma técnica bastante promissora para fabricação de compósitos. Também conhecida por squeeze-casting, permite a infiltração de pré-formas cerâmicas altamente porosas ou sistemas particulados das mais diversas naturezas, com o principal objetivo de obtenção de propriedades especiais, tai
Publicado em: 2007