Spray Pyrolysis
Mostrando 1-12 de 26 artigos, teses e dissertações.
-
1. Mechanical Behavior of Multiwalled Carbon Nanotube Reinforced 7075 Aluminum Alloy Composites Prepared by Mechanical Milling and Hot Extrusion
In this paper, multiwalled carbon nanotubes (MWCNTs) were synthesized by spray pyrolysis to be used later as material reinforcement in the production of MWCNTs/Al7075 aluminum composites. Both, MWCNTs and MWCNTs/Al7075 composites were microstructurally and mechanically characterized. Scanning electron microscopy (SEM) analysis shows MWCNTs formed by multiple
Mat. Res.. Publicado em: 31/01/2019
-
2. Ga Dopant Induced Band Gap Broadening and Conductivity Enhancement in Spray Pyrolysed Zn0.85Ca0.15O thin Films
Ga doped Zn0.85Ca0.15O thin films were prepared by spray pyrolysis method and studied the impact of Ga doping concentration on the physical properties of these films. XRD analysis confirmed the structural purity and polycrystalline nature of the films and composition analysis verified the incorporation of dopants in the structures. Optical transmission in th
Mat. Res.. Publicado em: 03/09/2018
-
3. Effect of Dy3+ Amount on the Structural and Luminescence Properties of LaNbO4:Dy3+ Phosphor Obtained by One-Step Spray Pyrolysis Process
In this study, Dy3+-doped LaNbO4 phosphors with a blue to white emission that can be tuned by varying the activator concentration were prepared by one-step spray pyrolysis process. According to the powder X-ray diffraction results, increasing Dy3+ concentration favored the tetragonal phase. Slight changes were observed in the recorded Raman spectra as a func
J. Braz. Chem. Soc.. Publicado em: 2018-03
-
4. Spray Deposited Nanostructured CuO Thin Films: Influence of Substrate Temperature and Annealing Process
In this study, CuO thin films were deposited on glass substrates at a wide range of temperatures from 450ºC to 550ºC with steps of 25ºC by chemical spray pyrolysis technique. Aiming to investigate the effect of annealing process, one of the resulting films was annealed at 450ºC for 3 hours under ambient air. Based on X-ray diffraction, all the resulting
Mat. Res.. Publicado em: 11/01/2018
-
5. ITO Obtained by Spray Pyrolysis and Coating on Glass Substrate
Conductive thin films have various applications in different technological fields. Indium tin oxide (ITO) is a mixed oxide. In the film form, ITO has been widely employed as electrode in many optoelectronic devices. Methods like thermal evaporation, sputtering, chemical vapor deposition (CVD), electron beam, spray coating, and sol-gel synthesis give ITO thin
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
6. B-N Codoped p Type ZnO Thin Films for Optoelectronic Applications
The success of codoping by donor-acceptor impurities in accomplishing p type ZnO thin films deposited by spray pyrolysis technique is reported here. Monodoping ZnO with N altered the conductivity type but the resistivity is too high making it practically impossible to be useful in optoelectronic applications. B-N codoping increased the carrier concentration
Mat. Res.. Publicado em: 27/11/2017
-
7. Mechanisms of Ion Detection for FET-Sensors Using FTO: Role of Cleaning Process, pH Sequence and Electrical Resistivity
The use of FTO samples as an extended gate field effect transistor biosensor is presented. The FTO samples were produced by spray pyrolysis technique. The cleaning process is shown to have a fundamental importance for the final sensitivity of the samples when multiple re-usage is adopted. The role of electrical resistivity and morphology of the films are inv
Mat. Res.. Publicado em: 31/07/2017
-
8. Effect of La 0.8 Sr 0.2 MnO 3 powder addition in the precursor solution on the properties of cathode films deposited by spray pyrolysis
ABSTRACT Films of lanthanum strontium manganite, LSM (La0.8Sr0.2MnO3) were deposited on yttria stabilized zirconia (YSZ) substrates by different methods aiming to establish the most suitable route to prepare cathodes for solid oxide fuel cells (SOFC). Samples were obtained by using a solution of lanthanum, strontium and manganese nitrates or a dispersion of
Matéria (Rio J.). Publicado em: 11/05/2017
-
9. Dynamically Configurable Nonlinear Optical Switching Based on Vertically Aligned Carbon Nanotubes
Abstract The modification of the third order nonlinear optical response exhibited by vertically aligned carbon nanotubes in two-wave mixing interactions was analyzed. All-optical switching effects were explored by using a vectorial optical Kerr gate with nanosecond pulses at 532 nm wavelength of excitation. The samples were prepared by a spray pyrolysis meth
Mat. Res.. Publicado em: 01/08/2016
-
10. Luminescent Terbium Doped Aluminate Particles: Properties and Surface Modification with Asparagine
New luminescent organic-inorganic hybrid particles based on Tb-doped aluminates and asparagine (Asn) surface modifiers were investigated. The Tb3+ doped inorganic core was obtained by spray pyrolysis, at 200 ºC γ-AlOOH (BOE:Tbx%) or at 700 ºC γ-Al2O3 (γTA:Tbx%). The reaction of Asn with boehmite in water disaggregated the sub-micronic boehmite particles
J. Braz. Chem. Soc.. Publicado em: 2015-12
-
11. CoAl2O4 blue nanopigments prepared by liquid-feed flame spray pyrolysis method
abstractCoAl2O4 pigments were synthesized through Liquid-Feed Flame Spray Pyrolysis (LF-FSP) method using metallorganic precursors of cobalt propionate and alumatrane. The precursors were dissolved in ethanol and aerosolized into a methane/oxygen flame where it was combusted to result in nanopowders at a single step. The resulting nanopowders were collected
Matéria (Rio J.). Publicado em: 2015-09
-
12. ProduÃÃo de Filmes Finos de SnO2 pelo MÃtodo de Spray PirÃlise Utilizando um Forno a GÃs Natural com CombustÃo de FiltraÃÃo / Production of Thin Films of SnO2 by Spray Pyrolysis Method Using a Furnace Gas Oven with Combustion Filtration
O diÃxido de estanho (SnO2) em forma de filme fino pode ser produzido com grande transparÃncia à luz visÃvel e boa condutividade elÃtrica. Os filmes finos de SnO2 possuem muitas aplicaÃÃes tecnolÃgicas na indÃstria, principalmente em aparelhos eletrÃnicos que utilizam display de visualizaÃÃo, como em dispositivos em laboratÃrios de pesquisa. Uma
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/03/2012