Spinel Phase
Mostrando 1-12 de 40 artigos, teses e dissertações.
-
1. Biphasic 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 nanopowders by in situ sol-gel synthesis
Abstract Nanopowders of the 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 (x=0, 0.25, 0.5, 0.75, and 1) were synthesized by the in situ sol-gel method using poly(acrylic acid) (PAA1800) as a chelating agent. The synthesis developed using PAA1800 ensured the simultaneous crystallization of two phases. The results provided a reliable method for producing biphasic nanopowders i
Cerâmica. Publicado em: 2022
-
2. Ferrimagnetic to paramagnetic transition and dielectric relaxation in Ni1-xZnxFe2O4 ferrites
Abstract The spinel ferrite system Ni1-xZnxFe2O4 (x=0-0.7, Δx=0.1) was prepared by wet chemical co-precipitation method using sulfates of respective metal ions. The electrical resistivity and dielectric properties of the prepared samples have been studied as a function of temperature, frequency, and Zn content (x). The DC resistivity (ϱ) was measured in th
Cerâmica. Publicado em: 2021-06
-
3. Experimental and Theoretical Study of LiMn2O4 Synthesized by the Solution Combustion Method Using Corn Starch as Fuel
Lithium manganese oxide, LiMn2O4, was synthesized in two temperature stages, where the first consisted by an ecofriendly solution combustion method at 300 °C. Finally, the as-burned powders were thermal treated at 500 and 700 °C. The structural and morphological changes were evaluated by the Rietveld method and density functional theory (DFT) calculations.
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
4. Obtenção de ferritas de cálcio dopadas com cromo visando aplicação em esmaltes transparentes brilhante e mate
RESUMO Este trabalho tem como objetivo obter óxidos com estrutura tipo espinélio de composição CaFe1,8Cr0,2O4 pelo método gelatina, visando aplicação em esmaltes transparentes brilhantes e mate. Os pós precursores, resultantes do processo de síntese, foram calcinados a 600 °C e a 800 °C para a obtenção da fase espinélio. Os pós foram caracteri
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. Nanoparticles of Ni1-x Znx Fe2 O4 used as Microwave Absorbers in the X-band
Ferrites nanoparticles of Ni1-xZnxFe2O4 ferrites with x varying between 0 and 1, in steps of 0.2, were obtained by solution combustion synthesis (SCS) and dispersed in oil paint at the concentrations of 10, 20, 30 and 40% by ferrite weight of ferrite, with the aim of producing electromagnetic wave absorbing composites, in the X band (8-12 GHz). The ferrite p
Mat. Res.. Publicado em: 21/10/2019
-
6. Síntese e caracterização de cobaltita de níquel (NiCo2O4) obtida pelométodo dos precursorespoliméricos
RESUMO A cobaltita de níquel (NiCo2O4) de estrutura do tipo espinélio apresenta baixa estabilidade térmica em torno dos 400 °C, que ocasiona a perda de NiO, afetando de maneira significativa as propriedades físicas e estruturais do material produzido. Neste trabalho a cobaltita de níquel foi preparada pelo método dos precursores poliméricos. O materi
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Study of ZnAl2O4 spinel nanoparticles synthesized using gelatin as organic precursor
Resumo Neste trabalho, pós do espinélio aluminato de zinco foram preparados por um método Pechini modificado, rápido, simples, ambientamento seguro e de baixo custo, utilizando gelatina comercial como precursor orgânico. Os materiais foram calcinados a 600, 700 e 800 °C e caracterizados por análise termogravimétrica, difratometria de raios X (DRX) in
Cerâmica. Publicado em: 06/06/2019
-
8. Thermal behavior (TG-DTA-TMA), sintering and properties of a kaolinitic clay from Buenos Aires Province, Argentina
Resumo As propriedades tecnológicas de um caulim local, considerado um potencial material industrial, foram correlacionadas com o comportamento térmico e processos de sinterização realizados por meio de uma série de análises termoquímicas. A caracterização química e mineralógica do material foi realizada, juntamente com uma simples caracterizaçã
Cerâmica. Publicado em: 06/06/2019
-
9. Avaliação do tratamento térmico no catalisador magnético Ni0,5Zn0,5Fe2O4 e sua atividade catalítica na produção de biodiesel por transesterificação e esterificação simultânea do óleo de fritura
Resumo O objetivo deste trabalho foi avaliar o efeito do tratamento térmico na síntese do catalisador Ni0,5Zn0,5Fe2O4 e o desempenho catalítico em reações de transesterificação e esterificação simultânea (TES) do óleo de fritura. Os catalisadores foram sintetizados por reação de combustão sem e com tratamento térmico sequencial a 800 °C com t
Cerâmica. Publicado em: 2019-01
-
10. Síntesis y estudio de propiedades estructurales y magnéticas de ferritas Mg1-xZnxFe2O4 (x= 0-0,9)
ABSTRACT Nowadays, iron oxide based magnetic nanoparticles are used in several science and technology applications due to their magnetic properties. Likewise, these materials are used in biomedical applications such as contrast agents for magnetic resonance imaging, magnetic hyperthermia, targeted drug delivery, etc. In this work, the synthesis and character
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Structural, optical and electrical properties of Ni-doped Co3O4 prepared via Sol-Gel technique
In this article, Nickel doped Cobalt oxide thin films and powders have been prepared on glass substrates using sol gel based dip coating process in order to investigate their optical, structural and electrical properties. The Ni concentration was changed from 0 to 9 wt(%).The synthesized samples were characterised by Ultraviolete visible analysis, X-ray diff
Mat. Res.. Publicado em: 07/02/2018
-
12. Pseudocapacitance Properties of Co3O4 Nanoparticles Synthesized Using a Modified Sol-Gel Method
This work reports the synthesization of nanoparticles cobalt oxide (Co3O4) with no secondary phase by a modified sol-gel method and its structural morphological and electrochemical characterizations. FTIR, XRD and Raman analysis showed the formation of spinel cobalt oxide with no secondary phase. TEM images revealed that an undefined morphology with average
Mat. Res.. Publicado em: 05/02/2018