Spectral Domain Analysis
Mostrando 1-12 de 52 artigos, teses e dissertações.
-
1. Characterization of the Ge/Bi2O3 Interfaces
In this article, the properties of the Ge/Bi2O3 interfaces as microwave cavities are reported and discussed. The interface is composed of monoclinic Bi2O3 films grown onto polycrystalline cubic Ge substrate. It is observed that consistent with the theoretical design of the energy band diagram, the experimental current-voltage characteristics of the Yb/Ge/Bi2
Mat. Res.. Publicado em: 04/04/2019
-
2. Rigorous Analysis of a Compact Triangular Antenna Array Using the Spectral Domain Method
Abstract The main objective of this work is the characterization of triangular array antenna with circular form by using the spectral domain technique. Firstly, the spectral domain formulation of single triangular patch antenna is given, in order to calculate its resonant frequencies and its radiation patterns. Then, we calculate and plot the total radiated
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-03
-
3. Spectral Method for Localization of Multiple Partial Discharges in Dielectric Insulation of Hydro-Generator Coils: Simulation and Experimental Results
Abstract A methodology based on spectral analysis for localization of multiple partial discharges in dielectric region of hydro-generator coils is proposed. This pinpointing of multiple discharges aims to provide means for performing diagnosis of insulating regions of the coil. A numerical model of the structure was developed by using the finite-difference t
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2016-09
-
4. Management Process of a Frequency Response Flight Test for Rotorcraft Flying Qualities Evaluation
ABSTRACT This paper applies the frequency response methodology to characterize and analyze the flying qualities of longitudinal and lateral axes of a rotary-wing aircraft, AS355-F2. Using the results, it is possible to check the suitability of the aircraft in accordance with ADS-33E-PRF standard, whose flying qualities specifications criteria are based on pa
J. Aerosp. Technol. Manag.. Publicado em: 2016-09
-
5. Comparison of In-Flight Measured and Computed Aeroelastic Damping: Modal Identification Procedures and Modeling Approaches
ABSTRACT The Operational Modal Analysis technique is a methodology very often applied for the identification of dynamic systems when the input signal is unknown. The applied methodology is based on a technique to estimate the Frequency Response Functions and extract the modal parameters using only the structural dynamic response data, without assuming the kn
J. Aerosp. Technol. Manag.. Publicado em: 2016-06
-
6. Sampling Position under No-Tillage System Affects the Results of Soil Physical Properties
ABSTRACT Understanding the spatial behavior of soil physical properties under no-tillage system (NT) is required for the adoption and maintenance of a sustainable soil management system. The aims of this study were to quantify soil bulk density (BD), porosity in the soil macropore domain (PORp) and in the soil matrix domain (PORm), air capacity in the soil m
Rev. Bras. Ciênc. Solo. Publicado em: 29/04/2016
-
7. Sistemas CDMA ópticos coerentes baseados em codificação de fase espectral / Coherent optical CDMA systems based on spectral phase coding
In this work we perform a comprehensive analysis of a spectral phase-encoded time spreading optical code division multiple access (SPECTS-OCDMA) system. Despite being a numerical study, efforts were concentrated on the investigation of more realistic scenarios using as much information as possible from implemented test-beds in laboratories. In this context,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/12/2012
-
8. Desenvolvimento de ferramenta de comparação de técnicas de processamento de sinais para determinar fadiga muscular por meio do sinal emg / Toolkit development for signals processing technics comparison to detect muscular fadigue by EMG signal
This study aimed to development of a computational tool for electromyographic signal (EMG) analysis by signal processing techniques to determine muscular fatigue. With Ethics Committee of Federal University of Goiás approve were recorded from the dominant biceps brachii of 10 volunteers, that did not ever had muscular disease. The protocol consisted on get
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/07/2012
-
9. Spectral domain analysis of double screen frequency selective surfaces
This paper presents a numerical investigation for a double screen frequency selective surface (FSS) with perfectly conducting rectangular patch elements. The analysis uses a full wave technique to obtain the scattering characteristics. The analysis combines the immitance approach and the method of moments to obtain the scattered fields and, consequently, the
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2012-06
-
10. Planar multilayer structure analysis: an educational approach
This paper discusses how symbolic computation combined with a circuit model can be used for analyzing planar multilayer structures, in a manner suitable for educational approach. Working in the Fourier domain, expressions for the transversal spectral Green’s functions are evaluated in compact, closed form using the symbolic computation capability of the Ma
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2012-06
-
11. Stochastic modeling of flexible rotors
Flexible rotors are characterized by inherent uncertainties affecting the parameters that influence the dynamic responses of the system. In this context, the handling of variability in rotor dynamics is a natural and necessary extension of the modeling capability of the existing techniques of deterministic analysis. Among the various methods used to model un
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
12. Análise de onda completa de superfície seletiva em freqüência do tipo anteparo duplo
Esse trabalho apresenta uma análise teórica e resultados numéricos e experimentais das características de espalhamento de superfícies seletivas em frequência, que usam elementos do tipo patch perfeitamente condutor. As estruturas são compostas por duas superfícies seletivas em frequência sobre substratos dielétricos isotrópicos cascateadas, separa
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/12/2011