Space And Shape
Mostrando 1-12 de 174 artigos, teses e dissertações.
-
1. Da impossibilidade de conter: intervenções urbanas e produção de subjetividade em Porto Alegre
Resumo Através da errância do pesquisador pela cidade de Porto Alegre, o artigo explora diferentes intervenções urbanas e seus efeitos nos processos de subjetivação. Passando pela implementação de containers de lixo a diferentes formas de arte que se fazem presentes na cidade, o pesquisador constrói uma narrativa acerca das forças que compõem a ci
Horiz. antropol.. Publicado em: 02/12/2019
-
2. Effect of Magnification during Post Space Preparation on Root Cleanness and Fiber Post Bond Strength
Resumo Avaliar o efeito do método de visualização durante o preparo do espaço do pino sobre o remanescente de material obturador endodôntico e sobre a resistência adesiva do pino de fibra de vidro. Trinta incisivos centrais superiores humanos com canal radicular circular foram selecionados, foram desobstruídos a 15 mm e obturados. Os dentes foram divi
Braz. Dent. J.. Publicado em: 07/10/2019
-
3. Use of intrarradicular pins in primary teeth: case report of one year of accompanying
RESUMO Os dentes decíduos possuem um papel importante no crescimento e desenvolvimento da criança, além de serem importantes para o bom desempenho da função mastigatória, fonação, oclusão e estética, são os melhores mantenedores de espaço e guia de erupção para o sucessor permanente. Para região anterior, existem diferentes alternativas de tra
RGO, Rev. Gaúch. Odontol.. Publicado em: 12/09/2019
-
4. The role of critical qualitative research in educational contexts: A Canadian perspective
RESUMO Neste artigo, a autora discute a mudança qualitativa na pesquisa educacional de uma dependência histórica de quadros positivistas e pós-positivistas para uma proliferação de pesquisa situada dentro de um paradigma qualitativo interpretativista. Oferecendo uma perspectiva canadense, a autora situa a discussão da pesquisa qualitativa crítica em
Educ. rev.. Publicado em: 29/07/2019
-
5. Representatividade da amostragem com emprego do trier na caracterização de leiras de compostagem de resíduos sólidos urbanos com base na Teoria da Amostragem de Pierre Gy
RESUMO O objetivo deste trabalho foi avaliar o desempenho do amostrador trier (NBR 10007/2004) na representatividade das propriedades de leiras de compostagem confeccionadas com resíduos sólidos urbanos, no início da degradação dos resíduos (8 dias) e no composto orgânico pronto (120 dias), utilizando como referência um método adaptado à compostage
Eng. Sanit. Ambient.. Publicado em: 30/05/2019
-
6. Two-dimensional Determination of the Decision Boundary for a Radar Detection Method in the Moment Space
ABSTRACT: The radar detection with decision making in the moments space (DRACEC method) is based on a statistical analysis to determine the boundary between the background (absent target) and the anomaly (present target) classes. In this article, the boundary is taken as an ellipse and is calculated for two dimensions, emphasizing its geometric interpretatio
J. Aerosp. Technol. Manag.. Publicado em: 09/05/2019
-
7. Fabricación de espumas de cobre por pulvimetalurgia
ABSTRACT A method for the fabrication of copper foams by powder metallurgy, employing carbamide beads as space holders, is presented. These are removed by water dissolution before sintering the compact. The method allows for a precise control of the cell characteristics (size, shape and distribution) within an interconnected porosity. The use of metal powder
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Releasing systems for aerospace industry based upon Shape Memory Alloys: characterization of materials for actuators
ABSTRACT Releasing and deployment maneuvers carried out during space satellites launching are usually performed by utilizing pyrotechnics loads. However, it is considered convenient to replace this technique by others not requiring explosives (Non Explosive Actuators-NEA). This is mainly due to the necessity of reducing high-shock and vibrations induced leve
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Estructuras de titanio con gradiente de porosidad – fabricación por el método de partículas espaciadoras y caracterización
ABSTRACT It has proposed the use of porous titanium to reduce the problem of mechanical incompatibility, which occurs between such material used in implants and bone. The pores introduction in titanium decreases its elastic modulus by bringing it closer to that of both cortical and trabecular bones. This paper describes titanium fabrication by powder metallu
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Finite element modelling to assess the effect of position and size of the piezoelectric layer of a hybrid beam
Abstract A one dimensional finite element model is presented to assess the effect of position and size of the piezoelectric layer of a hybrid beam. The efficient layerwise (zigzag) theory is used for making the finite element model. The 1D beam element has eight mechanical and a variable number of electrical degrees of freedom. The codes are developed in Ma
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
11. Influence of Pellet Compaction Pressure on the Physical Properties of La0.7Ba0.3MnO3 Manganite
Perovskite manganite La0.7Ba0.3MnO3, synthesized by ionic coordination reaction method (ICR) was compacted into pellets under different compaction pressures (Pc) and sintered at a temperature of 1150°C for 10h under a flow of O2. X-ray diffraction (XRD) data reveal that the samples can present simultaneously two phases - a rhombohedral structure with space
Mat. Res.. Publicado em: 11/12/2017
-
12. Numerical Simulations to Assess ART and MART Performance for Ionospheric Tomography of Chapman Profiles
ABSTRACT The incomplete geometrical coverage of the Global Navigation Satellite System (GNSS) makes the ionospheric tomographic system an ill-conditioned problem for ionospheric imaging. In order to detect the principal limitations of the ill-conditioned tomographic solutions, numerical simulations of the ionosphere are under constant investigation. In this
An. Acad. Bras. Ciênc.. Publicado em: 31/07/2017