Solidification
Mostrando 13-24 de 276 artigos, teses e dissertações.
-
13. Length Scale of the Dendritic Array Tailoring Strength of a 5052 Aluminum Alloy
The present research aims to characterize 5xxx alloy series, considering chemistries based on the commercial 5052 alloy with three Mg contents (2.4wt.%, 2.6wt.% and 3.2wt.%) through transient directional solidification experiments. Very representative incoming impurities to a given twin-roll casting procedure were reached. As such, the Si, Fe, Cu, Mn and Cr-
Mat. Res.. Publicado em: 03/12/2018
-
14. Characterization of the Physicochemical Properties of Different Biodiesel Samples
ABSTRACT For combustion engines to perform well, it is necessary that the fuel used be of high quality. Fuel quality can be analyzed through different physicochemical properties. This study presents comparisons between the values presented in literature, legislation and those obtained through experimental tests of different biodiesel samples. Biodiesel is a
Braz. arch. biol. technol.. Publicado em: 29/11/2018
-
15. Relationship Between Aluminum-Rich/Intermetallic Phases and Microhardness of a Horizontally Solidified AlSiMgFe Alloy
An experimental study with an A356-AlSiMgFe alloy was developed to evaluate the microhardness performance in the microstructure resulting of an unsteady-state horizontal solidification process. The Al-7wt%Si-0.3wt%Mg-0.15wt%Fe alloy was elaborated and directionally solidified in a water-cooled horizontal solidification device. In order to experimentally dete
Mat. Res.. Publicado em: 23/11/2018
-
16. Effect of Solidification Processing Parameters and Silicon Content on the Dendritic Spacing and Hardness in Hypoeutectic Al-Si Alloys
Aluminium with silicon as alloying element, form a class of material providing the most significant part of all material casting manufactured materials. These alloys have a wide range of applications in the automotive and aerospace industries. It is widely recognized that moderate addition of silicon to aluminum, significantly improves the resulting mechanic
Mat. Res.. Publicado em: 17/09/2018
-
17. Effect of Growth Velocity and Zn Content on Microhardness in Directionally Solidified Al-Zn Alloys
In this study, Al-xZn (x=1, 3, 5, 7, 10 and 20 wt. %) alloys were prepared using metals of 99.99% high purity in the vacuum atmosphere. These alloys were directionally solidified upward with a constant temperature gradient, G (10.3 K/mm) and different growth velocities (V) between 8.25 and 165 µm/s in the directional solidification apparatus. The experiment
Mat. Res.. Publicado em: 13/09/2018
-
18. Preparation and Growth Characterization of Al2Cu Phase Crystal with the Single Orientation Under Directional Solidification
Through decreasing the sample size, the regular faceted rectangular Al2Cu phase crystal was prepared under directional solidification. Effects of sample size on the microstructure morphologies and orientations of intermetallic Al2Cu phase crystal growth at 10 µm/s have been characterized and investigated. The transverse-section microstructure of primary Al2
Mat. Res.. Publicado em: 06/09/2018
-
19. Movimiento de las interfases durante la solidificación horizontal de aleaciones estaño-zinc
ABSTRACT Solidification processing is one of the important routes to produce materials, especially metals and alloys. The parameters for the transformation from liquid to solid, such as the temperature gradient, the growth rate, the cooling rate, the interphase velocity, vary from process to process and in one process also as a function of time and space. Th
Matéria (Rio J.). Publicado em: 19/07/2018
-
20. Efecto del tiempo de superpulso de soldadura sobre la evolución microestructural de un acero de bajo carbono
ABSTRACT The Super Pulse arc type was developed to provide a solution to butt root pass beads in the semi-automatic welding process with gas protection (GMAW). Unlike standard pulse welding, the Super Pulse uses a sequence of different pulse waveforms to create a cord shape and appearance similar to the GTAW process. It uses higher amperage in the primary ph
Matéria (Rio J.). Publicado em: 19/07/2018
-
21. An Experimental Study of the Solidification Thermal Parameters Influence upon Microstructure and Mechanical Properties of Al-Si-Cu Alloys
Metals solidification involves the transformation of the molten metal back into the solid state. Solidification structures impact heavily on the final product's characteristics. The microstructure effects on metallic alloys properties have been highlighted in various studies and particularly the dendrite arm spacing influence upon the mechanical properties s
Mat. Res.. Publicado em: 18/06/2018
-
22. Numerical Analysis of Twin-Roll Casting of Strips With Profiled Cross-Section
The relatively high production costs of innovative materials with tailored properties such as Tailor Welded Blanks, Patchwork Blanks, Tailor Heat Treated Blanks and Tailor Rolled Blanks are responsible for a growing interest in new cost-effective production methods. One of the promising energy-saving and environmental friendly technologies for the production
Mat. Res.. Publicado em: 16/04/2018
-
23. Transient Unidirectional Solidification, Microstructure and Intermetallics in Sn-Ni Alloys
The present research work examines the microstructural arrangements formed during the transient solidification of eutectic Sn-0.2wt.%Ni and hypereutectic Sn-0.5wt.%Ni alloys. Also, it examines their respective correlations with solidification thermal parameters: eutectic growth rate (VE) and eutectic cooling rate (ṪE); length scales of matrix and eutectic
Mat. Res.. Publicado em: 12/04/2018
-
24. Microstructure and Flight Behaviors of Droplet and its Solidification in Twin-Wire Arc Sprayed Ni-Al Composite Coatings
Droplet flight and solidification behaviors during twin-wire arc sprayed (TWAS) composite coatings were systematically investigated. Both theoretical model and numerical method were established for calculating the droplet deformation, breakup and solidification process in air flow based on the volume of fluid (VOF) dual-phase flow model jointed with the stan
Mat. Res.. Publicado em: 19/03/2018