Sodium Hydroxide
Mostrando 1-12 de 214 artigos, teses e dissertações.
-
1. Sedimentation and rheological behavior of reactive and non-reactive magnesium hydroxide pulps for industrial spray dryer processing
Abstract Two different reactive concentrated magnesium hydroxide (HM) pulps, produced in a lab reactor mill, and a synthetic and non-reactive HM-pulp, for comparative analyses, have been prepared and studied. Sodium polyacrylate was selected as a dispersant for improving the HM pulp fluidity, with concentrations varying from 0.42% to 2.0% on a dry basis. The
Cerâmica. Publicado em: 2023
-
2. Mix design formulation range for metakaolin-based geopolymer synthesis
Abstract This article presents a range of mix design formulations to obtain metakaolin-based geopolymer synthesis. Geopolymer samples were synthesized from metakaolin, a 10 M sodium hydroxide solution, and alkaline sodium silicate. These three components were mixed in different proportions to form a paste which was molded in a cylindrical shape, set at room
REM - International Engineering Journal. Publicado em: 2022
-
3. Influence of the pH regulator on the dolomite hydrophobization process
Abstract A study was carried out to investigate the combined effect of released ions in the pulp by pH regulator and mineral surface on dolomite flotation. The tests were carried out using a dolomite sample in a bench flotation cell with automatic froth remover. Zeta potential measurements, solution conductivity and FTIR analysis were done to support the int
REM, Int. Eng. J.. Publicado em: 2020-09
-
4. CeαMn1-αO2 catalysts supported over γ-Al2O3 prepared by modified redox-coprecipitation methods for n-hexane combustion
A series of CeαMn1-αO2 catalysts supported on γ-alumina with various molar concentrations of Ce (α, from 0 to 0.90) was synthesized by coprecipitation, applying two different precipitating agents, namely, sodium hydroxide (method 1) and sodium carbonate (method 2), with the use of sodium permanganate as a redox agent for precipitation. XRD profiles of th
Quím. Nova. Publicado em: 2020-04
-
5. Mathematical Modeling of the Transesterification Reaction by Finite Elements: Optimization of Kinetic Parameters Using the Simplex Sequential Method
The use of biodiesel as fuel has been presented as a viable alternative in the search for renewable energies. It can be produced from the transesterification reaction of vegetable oils with methanol in the presence of sodium or potassium hydroxide as catalysts. In the present research, the transesterification reaction of soybean oil was modeled considering t
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
6. STUDY OF PARAMETERS AFFECTING THE COALESCENCE OF DIMETHYL DISULFIDE DROPS IN A MEROX UNIT
Abstract This study focuses on the coalescence of dimethyl disulfide drops with the mother phase at a flat aqueous-organic interface between dimethyl disulfide and different sodium hydroxide solutions. Drop coalescence is an important part of the Merox process for regenerating the solvent. A digital high-frame rate camera was used for recording drops coalesc
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
7. Concomitant Production of Hydrogen, Sodium Acetate, and Polymerized Species from Non-Catalytic Ethanol Dehydrogenation
A detailed study of the production of hydrogen and high added-value liquid products from the ethanol dehydrogenation reaction in the presence of sodium hydroxide (10% m m-1) was undertaken. Experiments were carried out in a batch reactor under different reaction conditions (temperature of 240 ºC and autogenous pressure between 45 and 72 bar), with analysis
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
8. Preparation of novel blue phosphate pigments in imitation of turquoise
Resumo Como novo pigmento azul, vários fosfatos hidratados de cobre e alumínio imitando turquesa, CuAl6(PO4)4(OH)8.4H2O, foram preparados misturando solução de nitrato de cobre, solução de nitrato de alumínio, ácido fosfórico e solução de hidróxido de sódio. Amostras com composição química semelhante à turquesa foram preparadas. Os pós obti
Cerâmica. Publicado em: 14/11/2019
-
9. Reuse of iron ore tailings in the production of geopolymer mortars
Abstract A great variety of silica and alumina-rich materials have been investigated in the production of alkaline activated binders (or geopolymers) with low environment impact, e.g. low CO2 emissions. Geopolymer mortars and concretes may be more environmentally friendly if not only Portland cement but also natural aggregates (sand, gravel) are replaced wit
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
10. Graduate and Undergraduate Teaching of Primary Tooth Pulpectomy: A Comparison among Brazilian Dental Schools
Abstract Objective: To compare the teaching of the pulpectomy in primary teeth among graduate and undergraduate Brazilian dental schools. Material and Methods: From August 2015 to July 2016, an 11-question survey was sent to 44 graduate and 207 undergraduate dental schools. Data obtained were summarized using descriptive statistics. Results: The response
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 02/09/2019
-
11. PRODUCTION AND CHARACTERIZATION OF PRECIPITATED SILICA FROM PALM OIL MILL FLY ASH USING CO2 IMPREGNATION AND MECHANICAL FRAGMENTATION
ABSTRACT In this research, sol-gel precipitation using CO2 impregnation and mechanical fragmentation method was applied to produce precipitated silica from Palm Oil Mill Fly Ash (POMFA). Carbon dioxide (CO2) was used in order to reduce the cost of the process and to enable sodium hydroxide recovery. The precipitation process was done in a stirred temperature
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
12. An Alternative and Simple Method for the Preparation of Bare Silica Nanoparticles Using Sugarcane Waste Ash, an Abundant and Despised Residue in the Brazilian Industry
Sugarcane waste ash, a Si-rich waste product, is generated in large quantities and creates a serious disposal problem in the Brazilian ethanol-sugar industry, affecting the environment and public health. Here, a simple method capable of generating bare silica nanoparticles utilizing this residue is demonstrated. Firstly, the crystalline silica present in sug
J. Braz. Chem. Soc.. Publicado em: 04/07/2019