Soda Water
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Manufacturing and characterization of sustainable macroporous glass foams
Abstract This work produced glass foams from soda-lime glass bottles, bentonite, and alumina by the replica method. Compositions with different contents of bentonite (5, 10, 15, and 20 wt%) were prepared and heat-treated at 800 °C. In the alumina-added compositions, 50 wt% of the bentonite was replaced by the alumina. The influences of the content of benton
Cerâmica. Publicado em: 2022
-
2. Avaliação da adição de resíduos de vidro sodo-cálcico e erva-mate em matriz cerâmica
Resumo O presente trabalho avaliou os efeitos da adição de resíduos de vidro sodo-cálcico e de erva-mate sobre a absorção de água, porosidade e resistência mecânica de um material cerâmico. Os pós homogeneizados foram compactados por prensagem uniaxial e submetidos a queima de 900 e 1100 °C a 2 °C.min-1. Os resultados mostraram que a adição de
Cerâmica. Publicado em: 2019-01
-
3. Results from portable and of low cost equipment developed for detection of milk adulterations
Abstract This work presents the results of a device, MilkTech, developed to detect milk tampering, based on electrical measurements. The device indicates possible frauds by water, sodium chloride, caustic soda, ethyl alcohol and sodium bicarbonate. The advantages in relation to traditional methods are portability, low cost and detection of mixed frauds. The
Food Sci. Technol. Publicado em: 2017-12
-
4. Utilization of banana stalk fiber as reinforcement in low density polyethylene composite
ABSTRACT Natural fibers could serve as viable and abundant alternatives to the expensive and non - renewable synthetic fibers as reinforcement in thermoplastic composites. The potentiality of banana stalk fiber at reinforcing a low density polyethylene matrix was examined in this study. Fibers were extracted from the stalk of banana plant and characterized f
Matéria (Rio J.). Publicado em: 2016-12
-
5. Effect of ageing and immersion in different beverages on properties of denture lining materials
OBJECTIVES: To evaluate the color stability and hardness of two denture liners obtained by direct and indirect techniques, after thermal cycling and immersion in beverages that can cause staining of teeth. MATERIAL AND METHODS: Seventy disc-shaped specimens (18 x 3 mm) processed by direct (DT) and indirect techniques (IT) were made from Elite soft (n=35) and
Journal of Applied Oral Science. Publicado em: 2010-08
-
6. Uso da técnica de eletrocinética para estabilização de um solo arenoso
A tentativa de modificar algumas propriedades dos solos é antiga. Alguns autores fazem considerações a tentativas ocorridas a três mil anos atrás. Com o crescimento populacional e o desenvolvimento de novos sistemas de produção ocorridos após a Revolução Industrial no século XVIII, houve uma intensa ocupação territorial exigindo obras de infra-e
Publicado em: 2008
-
7. Monitoramento da qualidade das Ãguas na Bacia do Rio Botafogo, em Pernambuco, com Ãnfase para a concentraÃÃo de mercÃrio total em Ãgua e sedimentos
Desde meados da dÃcada de 80, a populaÃÃo ribeirinha do Rio Botafogo, no canal de Cruz Canal de Santa Cruz, ItamaracÃ, tem passado por situaÃÃes crÃticas em relaÃÃo ao meio Ambiente, pelo crescimento desordenado e mal planejado, ocupaÃÃo do solo indevida, e como conseqÃÃncia o resultado à uma que perda na qualidade ambiental. A ocupaÃÃo do so
Publicado em: 2006
-
8. Depth Distribution of Microbial Diversity in Mono Lake, a Meromictic Soda Lake in California
We analyzed the variation with depth in the composition of members of the domain Bacteria in samples from alkaline, hypersaline, and currently meromictic Mono Lake in California. DNA samples were collected from the mixolimnion (2 m), the base of the oxycline (17.5 m), the upper chemocline (23 m), and the monimolimnion (35 m). Composition was assessed by sequ
American Society for Microbiology.