Small Scale Model Tests
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. COMPUTATIONAL ANALYSIS OF LOAD VENTILATION IN BROILER TRANSPORT
ABSTRACT The characterization of ventilation during the transport of broiler chickens is essential for identifying and characterizing the potential problems of a convective heat flow and its effects on the welfare and the health and production conditions of the chickens. The objective of this study was to evaluate the ventilation patterns in two layout model
Eng. Agríc.. Publicado em: 2021-02
-
2. Estudio de la formabilidad en caliente de aleaciones de titanio a través del ensayo de torsión y su aplicación a la optimización de procesos de forja y extrusión
ABSTRACT In the development of hot metal forming, the metallic products must comply with the requirements imposed by current standards. In some cases, the required microstructure can only be obtained through thermomechanical processing. With titanium and its alloys, small ranges of good workability are an additional difficulty. In this work the hot-workabili
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Slow Cook-Off Simulation of PBX Based on RDX
ABSTRACT: Cook-off tests are commonly used to assess thermal behaviour of energetic materials under external thermal stimuli. Numerical simulation became a powerful tool to reduce the costs with experimental tests. However, numerical simulations are not able to predict the violence of thermal response, but instead accurately reproduce radial heat flow in the
J. Aerosp. Technol. Manag.. Publicado em: 2017-06
-
4. Moderate sedation helps improve future behavior in pediatric dental patients – a prospective study
Abstract There is little evidence on the long-term effects of pharmacological management in children undergoing dental treatment. This study aimed to assess children’s behavior in consecutive dental sessions following oral rehabilitation using different pharmacological regimens for behavioral control. Participants were preschoolers who were previously trea
Braz. oral res.. Publicado em: 24/10/2016
-
5. Assessment of Digital Elevation Model for Digital Soil Mapping in a Watershed with Gently Undulating Topography
ABSTRACT Terrain attributes (TAs) derived from digital elevation models (DEMs) are frequently used in digital soil mapping (DSM) as auxiliary covariates in the construction of prediction models. The DEMs and information extracted from it may be limited with regard to the spatial resolution and error magnitude, and can differ in the behavior of terrain featur
Rev. Bras. Ciênc. Solo. Publicado em: 23/06/2016
-
6. Comparison between numerical and experimental results on the dynamics of floating system coupled with risers. / Confrontação numérico-experimental da dinâmica de sistema flutuante, considerando seu acoplamento com linhas de produção.
This research aims to present analysis and comparisons, intended to make part of the constant improvement of the oil platform analysis software, called Numerical Offshore Tank (Tanque de Provas Numérico - TPN). For this purpose, small-scale model tests were performed, and the results compared with the numerical model in TPN. The standard unit used in these
Publicado em: 2010
-
7. Simulação experimental da interação vento-chuva / Experimental simulation of the wind-rain interaction
Simultaneous occurrences of the combined action of rain and wind in different types of structures have been observed around of the world in the last 20 years. This mechanism has been causing curiosity to engineers and researchers due to their jeopardizing consequences to constructions. In these last twenty years people has been seeking for a way to simulate,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2010
-
8. Métodos e processos para a análise experimental de sistemas oceânicos de produção de petróleo e gás. / Methods and procedures for the experimental analysis of offshore systems for oil and gas production.
The increasing complexity of o shore system operations for oil and gas production is a reality. Currently, the need to evaluate the seakeeping of these systems requires understanding some phenomena not yet explored and, for that reason, researches using experiments with small scale models become indispensable. Results obtained in model basins require methodo
Publicado em: 2010
-
9. Um estudo de métodos de solução do modelo hipercubo de filas para sistemas de grande porte / A study of hypercube queueing model solution methods for large scale systems
The planning of public and private service systems is essential to assure the quality of the services realized by these systems. A model that has been widely used for planning server-to-customer service systems is the Hypercube Queueing model. The Hypercube Queueing model is an analytical stochastic model that allows the evaluation of different configuration
Publicado em: 2007
-
10. Produção de extratos secos padronizados de plantas medicinais brasileiras: estudo da viabilidade técnica e econômica do processo em leito de jorro / Standardized dried extracts of Brazilian medicinal plants: assessment of technical and economical feasibility of the spouted bed drying
The aim of this work was to investigate the technological and economical feasibility of the spouted bed drying process for production of the standardized dried extracts of Brazilian medicinal plants using the Bauhinia forficata Link as an experimental model. The objective was to demonstrate the potential of this technology for the processing of medicinal pla
Publicado em: 2007
-
11. The shape of space after WMAP data
What is the shape of space is a long-standing question in cosmology. I review recent advances in cosmic topology since it has entered a new era of experimental tests. High redshift surveys of astronomical sources and accurate maps of the Cosmic Microwave Background radiation (CMB) are beginning to hint at the shape of the universe, or at least to limit the w
Brazilian Journal of Physics. Publicado em: 2006-03
-
12. Fatigue analysis of aluminum drill pipes
An experimental program was performed to investigate the fundamental fatigue mechanisms of aluminum drill pipes. Initially, the fatigue properties were determined through small-scale tests performed in an optic-mechanical fatigue apparatus. Additionally, full-scale fatigue tests were carried out with three aluminum drill pipe specimens under combined loading
Materials Research. Publicado em: 2005-12