Slow Crack Growth
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Effect of grinding and aging on subcritical crack growth of a Y-TZP ceramic
Abstract This study aimed to investigate slow crack growth (SCG) behavior of a zirconia ceramic after grinding and simulated aging with low-temperature degradation (LTD). Complementary analysis of hardness, surface topography, crystalline phase transformation, and roughness were also measured. Disc-shaped specimens (15 mm Ø × 1.2 mm thick, n = 42) of a ful
Braz. oral res.. Publicado em: 03/05/2018
-
2. Efeito do processamento e da inclusão de fibras nas propriedades mecânicas e ópticas de uma porcelana odontológica / The effect of processing methods and fibers incorporation on the optical and mechanical properties of a dental porcelain
The objective was to evaluate the processing methods (conventional sintering and heat pressing) and fibers incorporation on the microstructure, mechanical properties (flexural strength f, and Weibull parameters m, 0 e 5%), slow crack growth parameters (n e f0) and contrast ratio (CR), translucency parameter (TP), opalescence parameter (OP) optical properties
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/08/2011
-
3. Mechanical behavior of ceramic materials used for fixed partial dentures / Comportamento mecânico de cerâmicas utilizadas na confecção de próteses parciais fixas
Objectives: to determine the flexural strength (f), Weibull modulus (m), slow crack growth coefficient (n) and fracture toughness (KIC) of three ceramics used as framework materials for fixed partial dentures (FPDs) (YZ- yttria partially stabilized zirconia tetragonal polycrystals; IZ- alumina-based zirconia-reinforced glass infiltrated ceramic; AL alumina p
Publicado em: 2010
-
4. Fracture mechanics methods applied to medium density polyethylene designed for extrusion of pipes. / Métodos de mecânica da fratura aplicados a polietileno de média densidade destinado à extrusão de tubos.
Medium density polyethylene (MDPE) is a semicrystalline thermoplastic polymer that has been increasingly used in engineering applications, as plastic pipes for water and gas distribution systems. Under constant load, however, this material may occasionally present creep failure, by means of a mechanism of slow crack growth, leading to leakage losses in the s
Publicado em: 2009
-
5. Estudo de propagaÃÃo de fratura em compÃsitos odontolÃgicos utilizando tomografia por coerÃncia Ãptica / Crack propagation study in dental composites by optical coherence tomography
Contemporary approaches to fatigue principles consider a fracture process in three phases: crack initiation, slow crack growth, and fast fracture. The purpose of this study was to analyze the sites of fracture initiation and slow crack propagation in a fiber reinforced composite, using images produced by the optical coherence tomography. The traditional micr
Publicado em: 2008
-
6. Crescimento de trinca subcrítico em cerâmicas odontológicas: efeito do material (microestrutura) e do método de ensaio / Growth of crack subcrítico in dental ceramics: effect of the material (Microstructure) and the test method
The objective of this study was to determine the mechanical properties and the microstructure of different dental ceramics in order to understand their influence on the slow crack growth (SCG) parameters, n (crack growth exponent) and ?f0, (scaling parameter), determined by different methods. The five ceramics tested were: porcelains VM7 (Vita) and D (d.Sign
Publicado em: 2007
-
7. Efffect of ion exchange on Weibull and slow crack growth parameters and R-curve behavior of a dental porcelain / Efeito da troca iônica nos parâmetros de Weibull, de crescimento subcrítico de trincas e no comportamento de curva R de uma porcelana odontológica
O objetivo deste estudo foi avaliar o efeito da temperatura de troca iônica (TI) nas propriedades mecânicas da porcelana Ultrapaline ST e o efeito da TI nos parâmetros de crescimento subcrítico de trincas (SCG) (coeficiente de SCG - n, parâmetro escalar - ?f0), de Weibull (resistência característica - ?0, módulo de Weibull - m) e no comportamento de
Publicado em: 2007
-
8. Development of alternative methods to the assessment of the creep fracture resistance of polyethylene resins used for the extrusion of water pipes. / Desenvolvimento de métodos alternativos para a avaliação da resistência à fratura por fluência de resinas de polietileno utilizadas para a extrusão de tubos de água.
Polyethylene has been largely used in potable water distribution systems, mainly in service lines. This polymer offers many advantages over its competitors: flexibility, low cost, ease installation and corrosion resistance. Pipes made with high density polyethylene HDPE, the generic designation of the material in the sanitation industry in Brazil fail
Publicado em: 2005