Sizing Analysis
Mostrando 1-12 de 98 artigos, teses e dissertações.
-
1. APPARENT DENSITY AS AN ESTIMATOR OF WOOD PROPERTIES OBTAINED IN TESTS WHERE FAILURE IS FRAGILE
ABSTRACT The use of new wood species in construction requires knowledge of their properties for safer and more economical structural sizing. In Brazil, structural projects are carried out according to the standard document ABNT NBR 7190:1997. Tests required by this standard for the complete characterization of species require large machines with high costs,
Eng. Agríc.. Publicado em: 2020-02
-
2. WATER VERSUS LACTOSE SOLUTION AS A DISPERSION MEDIUM FOR PARTICLE ANALYSIS IN SWEETENED CONDENSED MILK BY LASER DIFFRACTION
Sweetened condensed milk contains various dispersed particles, such as proteins, fats, and lactose, all of which make it highly viscous. During sweetened condensed milk production, microcrystalline lactose is added in order to control the product crystallization. The purpose of this study was to characterize the behavior of commercially sold sweetened conden
Quím. Nova. Publicado em: 21/10/2019
-
3. Is The Size of the Currently Available Implants for Total Hip Arthroplasty Adequate for Our Population?
Resumo Objetivo Definir se as dimensões de alguns implantes de fabricação nacional e estrangeira utilizados nas cirurgias de artroplastia do quadril estão adequadas ao perfil antropométrico da população brasileira. Métodos Estudo retrospectivo de pacientes submetidos a cirurgia primária de substituição artroplástica total do quadril. Foram ex
Rev. bras. ortop.. Publicado em: 07/10/2019
-
4. Avaliação do ambiente da prática profissional da enfermagem em instituições de saúde
Resumo Objetiv Avaliar o ambiente hospitalar onde a enfermagem exerce sua prática comparando hospitais públicos e privados e descrever as características que receberam avaliação desfavorável (≤ 2,5 pontos) na percepção dos profissionais. Métodos Estudo comparativo e transversal realizado em cinco hospitais (dois públicos - A e B e três priva
Acta paul. enferm.. Publicado em: 12/08/2019
-
5. Analyses of reinforced concrete beams strengthened with CFRP under bending: theorical and computational approaches
Resumo Este trabalho tem como objetivo compilar o embasamento teórico do ACI 440.2R:2008 [1] com o da NBR 6118:2014 [2] a fim de levar em consideração os conceitos da norma brasileira no dimensionamento à flexão de vigas reforçadas com PRFC (Polímeros Reforçados com Fibra de Carbono). A contribuição da norma brasileira é dada particularmente no qu
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
6. Dificuldades para implantar estratégias de segurança do paciente: perspectivas de enfermeiros gestores
Resumo OBJETIVO Compreender as dificuldades para implantação de estratégias de segurança do paciente no ambiente hospitalar na perspectiva de enfermeiros gestores. MÉTODOS Estudo descritivo, exploratório, qualitativo, realizado em quatro hospitais universitários públicos, utilizando roteiro de entrevista semiestruturada, em janeiro a março de 2015
Rev. Gaúcha Enferm.. Publicado em: 10/01/2019
-
7. Application of methodology for the adequacy of the electrical motor's power sizing: permanent and transient analysis
Abstract The suitability of the motive force contributes to the efficient use of electrical energy. On the other hand, the inadequate size of electric motors is directly connected to increased investment and running costs. This article presents the theory and mainly the application of a methodology for the adequacy of the motive power. The research was condu
REM, Int. Eng. J.. Publicado em: 2018-04
-
8. Applicability of FT-IR Techniques and Goniometry on Characterization of Carbon Fiber Surfaces
ABSTRACT Carbon fibers have been widely used as structural reinforcement in aeronautical composites, because of their exceptional mechanical properties. However, carbon fibers present few polar groups on their surfaces inducing a weak interaction with some thermosetting and thermoplastic matrices. Surface treatments, such as thermal and electrochemical oxida
J. Aerosp. Technol. Manag.. Publicado em: 2016-03
-
9. Geração distribuída aplicada à edificações : edifícios de energia zero e o caso do laboratório de ensino da FEC-Unicamp / Distributed generation applied to buildings : net zero energy buildings and the case of the laboratory at FEC-Unicamp
Electricity consumption in Brazil increased 47% in the last decade, and it is estimated that it will increase 55.6% until 2020. Most of the electricity generated in the country is based on large hydroelectric dams, located away from the major cities. The planned expansion of the generation park to meet this increase in the demand is also based on this model,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/08/2012
-
10. Sensibilidade da Brachiaria brizantha cv. Marandu ao excesso de água no solo / Sensitivity of Brachiaria brizantha cv. Marandu to excess soil water
The expansion of agriculture will promote the incorporation of new areas to the productive process and in this process, areas with drainage problems will have the possibility to be used. For the proper utilization of these areas, the correct sizing of drainage systems is important. For the rational sizing in a nonpermanent scheme, it is necessary to determin
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/07/2012
-
11. Análise de sistemas complexos de drenagem urbana. / Urban drainage complex systems analysis.
This thesis aims to analyze urban drainage complex systems in order to define a technique for the design of detention ponds structures. In this study, Urban Drainage Complex Systems are those composed of several detention ponds, distributed in a network of channels formed by various reaches. This type of system is typical in megacities. The design of the res
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/04/2012
-
12. Measuring bacterial cells size with AFM
Atomic Force Microscopy (AFM) can be used to obtain high-resolution topographical images of bacteria revealing surface details and cell integrity. During scanning however, the interactions between the AFM probe and the membrane results in distortion of the images. Such distortions or artifacts are the result of geometrical effects related to bacterial cell h
Brazilian Journal of Microbiology. Publicado em: 2012-03